粘土粒径及形态结构对粘土胶性能的影响

用超声波和离心方法将３种来源不同的粘土样品按粒分径分级，测定各级分粒径比表面积和结构，并制备相应级分的粘土胶进行物理力学性能测试，结果表明，在一定范围内，粘土粒径的变化仅对粘土胶的某些力学性能产生物明显的影响，而粘土粒子以其独特的形态结构对粘土胶产生显著的补强作用。     

软珊瑚Sinularia sp.中次生代谢产物的结构鉴定

细胞毒性;软珊瑚Sinularia sp.中次生代谢产物的结构鉴定     

含铜三元类水滑石化合物的合成及其性质

 以Cu（NO3）2，Zn（NO3）2和Al（NO3）3为原料，以NaOH为沉淀剂，利用共沉淀法合成了含铜三元类水滑石化合物CuZnAl－HTLcs．从不同Cu／Zn／Al比的混合原料溶液的滴定曲线入手，详细探讨了溶液pH值、原料加入方式、组分配比及水热处理条件对类水滑石合成的影响，利用XRD，ICP及比表面积测定对合成物进行了表征，并以苯酚羟基化为探针反应评价了催化剂的催化性能．结果表明，在体系pH＝5．0～6．2，（Cu＋Zn）／Al摩尔比＝2．0，Cu／Zn摩尔比≤1．0及室温条件下共沉淀后，于100℃水热处理3h，即可得到晶相单一和结晶度高的CuZnAl－HTLcs．变化pH法合成的样品的相对结晶度为100％，低过饱和法为76．5％，高过饱和法为75．9％．合成的CuZnAl－HTLcs中Cu2＋的含量均比原料液中Cu2＋的含量有所增加，这可能是由于在pH＝5．8时Cu2＋对Al（OH）3的同晶取代能力比Zn2＋强．随着CuZnAl－HTLcs中Cu含量的增加，催化剂对苯酚羟化反应的催化活性逐渐增大．     

粘土矿物的结构特征及其应用研究

阐述了贮量巨大、用途广泛的粘土矿物，其充分开发应用的关键，在于根据其结构特征，并通过适当的物理、化学方法加以改造、以适应各种不同工业应用的要求。并以我们对粘土矿物进行活化、改性、层间插入及其工业应用产品开发的初步研究成果，阐明利用粘土硅酸盐多层次结构的可变性，开拓新的应用性能的可能性及粘土矿物充分开发应用的途径。     

Evaluation of Orbital- and Ground State Energies of Some Open- and Closed-Shell Atoms over Integer and Noninteger Slater Type Orbitals

Ab initio calculations of the orbital and the ground state energies of some open- and closed-shell atoms over Slater type orbitals with quantum numbers integer and Slater type orbitals with quantum numbers noninteger have been performed. In order to increase the efficiency of these calculations the atomic two-electron integrals were expressed in terms of incomplete beta function. Results were observed to be in good agreement with the literature.     

STRUCTURING ＆ RHEOLOGY OF MOLTEN POLYMER／CLAY NANOCOMPOSITES

The evolution and the origin of “solid-like state” in molten polymer/clay nanocomposites are studied. Using polypropylene/clay hybrid (PPCH) with sufficient maleic anhydride modified PP (PP-MA) as compatibilizer, well exfoliation yet solid-like state was achieved after annealing in molten state. Comprehensive linear viscoelasticity and non-linear rheological behaviors together with WAXD and TEM are studied on PPCH at various dispersion stages focusing on time,temperature and deformation dependencies of the “solid-like” state in molten nanocomposites. Based on these, it is revealed that the solid-structure is developed gradually along with annealing through the stages of inter-layer expansion by PP-MA,the diffusion and association of exfoliated silicate platelets, the formation of band/chain structure and, finally, a percolated clay associated network, which is responsible for the melt rigidity or solid-like state. The network will be broken down by melt frozen/crystallization and weakened at large shear or strong flow and, even more surprisingly, may be disrupted by using trace amount of silane coupling agent which may block the edge interaction of platelets. The solid-like structure causes characteristic non-linear rheological behaviors, e.g. residual stress after step shear, abnormal huge stress overshoots in step flows and, most remarkably, the negative first normal stress functions in steady shear or step flows. The rheological and structural arguments challenge the existing models of strengthened entangled polymer network by tethered polymer chains connecting clay particles or by chains in confined melts or frictional interaction among tactoids. A scheme of percolated networking of associated clay platelets, which may in band form of edge connecting exfoliated platelets, is suggested to explain previous experimental results.     

反应条件对Cu/Al-Ce-PILC上丙烯选择性催化还原NO反应的影响

 采用聚合羟基复合阳离子合成交联黏土Al-Ce-PILC, 经SO2-4改性后,以浸渍法制备了铜基交联黏土催化剂Cu/Al-Ce-PILC, 并将其应用于C3H6选择性还原NO的反应,考察了预处理气氛、 O2和C3H6浓度、空速、水蒸气和SO2等反应条件对催化剂性能的影响. 结果表明, He预处理后催化剂表面的Cu物种以Cu+和Cu2+两种形式存在,而H2预处理后仅以Cu+存在, NO转化率最大值由23%升至56%. 反应体系中适当的O2和C3H6浓度可促进NO还原为N2, 但过高的浓度反而可降低NO的还原活性, O2同时可起到抑制积炭、清洁催化剂表面的作用. NO转化率随着空速的增大而降低. 10%水蒸气的存在可抑制NO的还原和C3H6的氧化,其转化率曲线向高温方向位移. 但是,由于金属氧化物交联柱表面的疏水特性, Cu/Al-Ce-PILC较Cu/ZSM-5具有较强的耐湿热稳定性, NO和C3H6最大转化率仅分别下降13%和5%. SO2的存在明显抑制了催化剂的低温活性,但对高温活性有一定促进作用.     

Enthalpy of Adsorption and Isotherms for Adsorption of Naphthenic Acid onto Clays

The enthalpies of adsorption and the isotherms for adsorption of naphthenic acid onto Na-montmorillonite, Na-kaolinite, and Na-illite were studied by means of calorimetry and the static method at 298.15 K. The results show that the enthalpies of adsorption and saturated adsorption amounts of naphthenic acid on different clays change in the order Na-montmorillonite > Na-illite > Na-kaolinite. The interaction between naphthenic acid and clays is discussed.     

The effect of the exchangeable metallic cation on the colloid properties of laponite treated with acridine orangea spectrophotometric study

The adsorption of the cationic dye acridine orange (AO) by different monoionic laponites leads to changes in the colloid properties of this synthetic mineral in aqueous solutions. The organic cation is adsorbed by the mechanism of cation exchange. Small amounts of adsorbed dye keep the clay in a peptized state with all metallic cations. Greater amounts of AO result in the neutralization of the electric charge of the clay, and its flocculation. In excess AO the charge of the clay platelets becomes positive and the clay is peptized. The colloid properties are studied by absorbance curves in which the absorbance is described as a function of the degree of saturation with constant clay concentrations or with constant dye concentrations. In the absorbance curves three regions can be identified. The transition between the first and second or the second and third regions depend on the exchangeable metallic cation initially present in the clay. The spectrophotometric method is useful in identifying the presence of tactoids and flocculation mechanism, whether it results in card-house or in book-house flocs.