Rapid and high-resolution analysis of geometric polyprenol homologues by connected octadecylsilylated monolithic silica columns in high-performance liquid chromatography

A Chromolith Performance octadecylsilyl (ODS) monolithic silica column (Merck) was compared with a conventional microparticulate ODS-bonded silica column in the high-performance liquid chromatography separation of natural polyprenols. A system comprising two connected monolithic columns afforded an equivalent separation at half the analysis time of the conventional method. Furthermore, ten connected columns achieved a tremendously high-resolution separation, in which the complicated series of homologous polyprenols with geometric isomerism were fully separated.     

Separation and sensitive determination of arsenic species (As/As) using the yeast-immobilized column and hydride generation in ICP–AES

Inorganic arsenic was separated using the yeast-immobilized column. Saccharomyces cerevisiae was covalently bonded unto the controlled pore glass, which showed selective preconcentration of As⁵⁺ over As³⁺. The effluent was directly connected to hydride generation (HG) to increase sensitivity. The optimum pH condition for the retainment of arsenic at the column was 7. As⁵⁺ and As³⁺ were completely separated in a few minutes with the flow rate of 1.5 ml min⁻¹. Three molars of nitric acid was adequate both for the elution of As⁵⁺ and hydride generation. The accuracy of the technique was tested with NIST SRMs. Quantitative analysis of arsenic species for herbicide, pesticide, and cigarette were performed, and the results showed good agreements with the suggested values. Yeast-immobilized column-HG-ICP showed a promising future for the arsenic speciation study.     

富勒烯C60的柱色谱分离法研究

本文提出了由Ｃ（６０）、Ｃ（７０）及少量高级富勒烯混合物（来自电弧汽化石墨所形成的碳灰）中分离出纯度为９９．９％Ｃ（６０）的两种改进的、简便价廉的柱色谱分离法．第一种方法用中性氧化铝作固定机以石油醚与甲苯（Ｖ／Ｖ＝９２．５／７．５）混合液作流动相；另一种方法以活性炭与硅胶作固定相，以甲苯作流动相，柱顶氮压约为０．０１ａｔｍ．本文尚将这两种方法与文献报道的两种相近的方法分别进行了比较．     

大口径厚液膜毛细管柱的制备

制备出了内径从0.46～0.74mm、液膜厚度从0.9～5.6μm的SE-54大口径厚液膜玻璃毛细管柱,并对它们的性能进行了评价。对低沸点的C_1-C_4烃进行了初步分离。     

Advances in two-dimensional GC with glass capillary columns

A versatile two-dimensional gas chromatograph is described, consisting of 2 separate ovens, one intermediate trap, an auxiliary inlet, and the necessary hardware to effect off-line switching according to the principle of Deans. The unit has been designed for use with high resolution glass capillary columns. The performance of individual instrumental components was critically evaluated. Results showed that low dead volume glass to metal connections were required in the manifold and detector lines to minimize extra-column effects. The mass of the intermediate trap must be low to allow rapid heating. Operational parameters are discussed and examples of some applications are shown.     

Copper ring-disk microelectrodes: fabrication, characterization, and application as an amperometric detector for capillary columns

A novel approach to the fabrication of metal ring-disk (RD) microelectrodes is presented that employs flexible chemical vapor deposition (CVD) and electrode modification techniques. Specifically, the development of a copper ring-disk microelectrode is described utilizing a combination of CVD coating, electroetching, and electroplating. Initially, a 25 μm diameter tungsten wire is concentrically coated by CVD with an insulating layer of silica, a layer of tungsten metal, and finally, a second outer layer of silica. The copper surface was prepared by first creating micrometer cavities by electrochemical etching the tungsten in hydroxide solutions followed by electrodeposition of copper from aqueous solutions of Cu(II). Each step of the process was characterized by scanning electron microscopy, optical microscopy, and cyclic voltammetry, demonstrating the preparation of a viable metal-based dual ring-disk microelectrode system. For the purpose of demonstrating the concept of introducing specific selectivity into the device, amperometric detection of galactose in 0.1 M NaOH was performed at +0.60 V in bulk solution and after flow injection analysis in a capillary column.     

有机聚合物整体柱及其在生物大分子色谱分离中的应用

整体柱是近年发展起来的一种新型的色谱分离分析技术，与传统的色谱柱相比，具有制作简单、背压低、分辨率高、柱容量大等优点。本文介绍了有机聚合物整体柱及其在生物大分子色谱分离领域的应用，分析了其存在的问题，并展望了其应用前景。     

Direct determination of estriol 3- and 16-glucuronides in pregnancy urine by column-switching liquid chromatography with electrospray tandem mass spectrometry

Using column-switching liquid chromatography/tandem mass spectrometry (LC-MS/MS), we developed an improved analytical method of urinary estriol glucuronides. This new method is derived predominantly from maternal and fetal precursors in pregnancy. We used in the following procedure: first, we filtered urine samples with a membrane filter. Next, we directly injected the 50 microL aliquot of urine samples onto a pre-column. Then, after activating the column-switching valve, we backflushed the loaded samples onto the C(18) analytical column. Urine samples can be assayed within 20 min without any sample preparation steps. We monitored separated estriol glucuronides by negative electrospray ionization (ESI) and selected-reaction monitoring (SRM). The calibration range of estriol-3-glucuronide (E3-3G) and estriol-16-glucuronide (E3-16G) was 0.1-20 microg/mL and the linearity of the method was 0.9984 for E3-3G and 0.9987 for E3-16G. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 10 ng/mL (E3-3G) and 5 ng/mL (E3-16G). The analytical recovery was over 85% and, in general, inter-day and intra-day variability for precision and accuracy were less than 10%. When applied to a pregnancy urine sample to biomedical monitoring of the function of the maternal/fetal unit, the proposed method allowed rapid and sensitive screening for the detection of E3-3G and E3-16G.     

催化裂化汽油中含硫化合物的分离氧化脱硫研究

以负载氧化铜的氧化铝层析柱对催化裂化(FCC)汽油全馏分进行分离,使其中的烷烃、烯烃与芳烃、含硫化合物分离成极性不同的两组,含硫化合物在芳烃组分中得以分离富集。分离后对芳烃组分中的含硫化合物进行氧化,脱硫率达72%。氧化后的芳烃组分与分离出来的烷烃、烯烃组分混兑,可使FCC汽油的总脱硫率达71·3%。     

Analysis of compounds of environmental concern: II. Diphenyl ethers

Nineteen halogenated and/or nitrated diphenyl ethers (currently listed in EPA Method 8111) have been separated on a DB-5/ DB-1701 column pair connected to an inlet splitter and separate electron capture detectors. Retention times are included for 10 additional compounds evaluated for their suitability as internal standards or surrogate compounds for incorporation into Method 8111. Method reproducibility and linearity are discussed, and results are presented for extracts of two real samples spiked with the 19 diphenyl ethers and analyzed using the dual-column dual-detector arrangement.