Computation of heat capacities of solid state benzene,p-oligophenylenes and poly-p-phenylene

Heat capacities (C_p) of solid benzene, biphenyl,p-terphenyl,p-quaterphenyl, and poly-p-phenylene were analyzed using the ATHAS Scheme of computation. The calculated heat capacities based on approximate vibrational spectra of solid benzene and the series of oligomers containing additional phenylene groups were compared to experimental data newly measured and from the literature to identify possible additional large-amplitude motion. The skeletal heat capacity was fitted to the Tarasov equation to obtain the one- and three-dimensional vibration frequencies ₁ and ₃ using a new optimization approach. Their relationship to the number of phenylene groupsn is: ₁=426.0–150.3/n; and ₃=55.4+81.8/n. Except for benzene, the quantitative thermal analyses do not show significant contributions from large-amplitude motion below the melting temperatures.This work was financially supported by the Div. of Materials Res., NSF, Polymers Program, Grant # DMR 90-00520 and Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464.     

Investigation of the thermophysical properties of polymers by the temperature wave technique

The technique of temperature waves to measure the complex thermophysical characteristics of materials has been proposed. The relations for the moduli and arguments of these characteristics for the case of plane temperature waves have been calculated. The temperature dependences of the moduli and arguments of complex thermophysical characteristics of polyvinylacetate (PVAc) at different frequencies and also the temperature dependences of its vibrational and configurational heat capacities have been determined. It has been shown that the vibrational heat capacity of PVAc in the region of softening grows sharply and its configurational heat capacity goes through a peak. The segmental mobility has been found to affect the heat transfer in the polymer in an ambivalent way causing both a decrease and increase of thermal conductivity.

---

Zusammenfassung Zur Bestimmung der komplexen thermophysischen Eigenschaften von Stoffen wurde eine Temperaturwellentechnik vorgeschlagen. Für den Fall zweidimensionaler Temperatur-wellen wurden die Verhältnisse von Moduli und Argumenten dieser Eigenschaften berechnet. Die Temperaturabhängigkeit von Moduli und Argumenten der komplexen thermophysischen Eigen-schaften von Polyvinylacetat (PVAc) bei verschiedenen Frequenzen und auch die Temperatur-abhängigkeit seiner Vibrations- und Konfigurations-Wärmekapazitäten wurden bestimmt. Es wurde gezeigt, daß die Vibrations-Wärmekapazität von PVAc im Erweichungsbereich scharf zunimmt und die Konfigurations-Wärmekapazität durch einen Peak geht. Man fand, daß die Segment-Mobilität den Wärmetransport im Polymer auf eine ambivalente Weise beeinflußt, in dem die Wärmeleit-fähigkeit entweder gesenkt oder angehoben wird.

     

钇对Ti-1100高温钛合金热稳定性和蠕变行为的影响

量了Ｔｉ１１００和Ｔｉ１１００／０１％Ｙ（质量分数）高温钛合金在６００℃／１００ｈ空气中暴露后的拉伸性能及在６００℃／１５０ＭＰａ／１００ｈ条件下的蠕变性能，利用透射电镜观察了合金室温及蠕变后的组织。结果表明，Ｔｉ１１００合金加入０１％的Ｙ后，由于原始β晶粒得到细化，明显改善了其热稳定性；固溶在基体中的硅原子阻碍位错滑移和攀移，使蠕变中的回复过程难于实现；稀土还抑制α２相的长大，所形成的氧化物也阻碍位错的运动。这些均有利于提高Ｔｉ１１００合金的抗蠕变性能。     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Hydration heat capacities of hydrophobic solutes at 248–373 K

A new equation is suggested to define the temperature dependence of the Gibbs energy of hydration of hydrophobic substances: ΔG ⁰ = b ₀ + b ₁ T + b ₂lnT. According to this equation, the hydration heat capacity is in inverse proportion to temperature. Consistent values of hydration heat capacity of nonpolar solutes have been obtained for different temperatures using data on solubility and dissolution enthalpy. The contributions of the hydrocarbon radicals and OH group to the heat capacity of hydration of the compounds were found for the temperature range 248–373 K. The hydration heat capacity of the hydroxyl group has a weak dependence on temperature and increases by only 12 J/(mol·K) in the specified temperature interval. Changes in the hydration entropy of hydrophobic and OH groups are calculated for the temperature increasing from 248 K to 373 K.     

Excess heat capacities and orientational order in systems containing hexadecane isomers of different molecular structure

Using the Picker flow microcalorimeter, excess heat capacities have been obtained at 25°C throughout the concentration range for 2,2-dimethylbutane,n-hexane, and cyclohexane each mixed with a series of hexadecane isomers of increasing degrees of orientational order, as determined by depolarized Rayleigh scattering. The isomers are 2,2,4,4,6,8,8-heptamethylnonane, 6-, 4-, and 2-methylpentadecane, andn-hexadecane. Thec _p ^E values are negative, increasing rapidly in magnitude with increase of orientational order, and are not predicted by the Prigogine—Flory theory which neglects order. Values ofc _p ^E are obtained at 10, 25, and 55°C for cyclohexane +6-, 4-, and 2-methylpentadecane which with other literature data lead to the temperature dependence of the thermodynamic excess functions for cyclohexane solutions of the five C₁₆ isomers. The excess enthalpy and entropy vary with the C₁₆ isomer and with temperature, but the corresponding variation of the excess free energy is small, indicating a high degree of enthalpy-entropy compensation. This is consistent with a rapid decrease with temperature of orientational order in the C₁₆ isomers.     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Ionization of aqueous toluic acids: Conductance and thermodynamics

Conductivities of aqueous solutions ofortho-, meta-, andpara-toluic acids have been measured for the concentration range 0.1–2 millimolar and at 5° intervals from 5 to 100°C. At each temperature pK _a(m) andA ₀ have been calculated using the paired ion model recently described by Fuoss. Thermodynamic parameters have been calculated for the ionization of each acid, and Walden products for the anions. Results are discussed in terms of contributions to acidity by enthalpy and entropy changes as well as by hydration of the various solute species.     

纳米级碳导电剂的种类对licoo2电化学性能的影响

碳纳米管;锂离子电池;正极;倍率容量;导电剂