Cellulose: the structure slowly unravels

This article attempts to bring together basic and complex information which has been gathered on cellulose structure, principally that of native cellulose, over the last few decades. Even though advances have been made in the field of crystallography, powder crystallography cannot yield a definitive cellulose structure and single crystal diffraction is not possible due to the lack of suitable crystals. Knowledge obtained on the biosynthesis of native cellulose and on the polymorphy of cellulose and its derivatives help our understanding of ultrastructure. Many inconsistencies between early crystallographic studies of native cellulose have been clarified by the discovery that two polymorphs (α and β) of cellulose I exist. Models of the possible ultrastructural arrangements within native cellulose have been put forward over the decades; with advancement in technology, computer simulations of small and large systems are being created to test the viability of these ultrastructural models. It is hoped that this review will aid in the understanding of the complexity and uncertainties that still exist in this subject. This revised version was published online in August 2006 with corrections to the Cover Date.     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Brønsted Acidity and Aluminum Substitution Characteristics of Si(nAi) Sites in Zeolites: A Theoretical MNDO Calculation

The Brønsted acidity of the various Si(nAl) sites present in zeolites is evaluated from proton binding energy and LUMO energy calculated by the semiempirical MNDO quantum chemical method. The two calculated energy values both exhibit a linear correlation with the existing ²⁹Si NMR chemical shift and the IR hydroxyl stretching frequency data. The inter-convertibility between different Si(nAl) sites during an alumination or dealumination process is also evaluated based on the calculated substitution energy. The results indicate that alumination processes are less favorable to occur in zeolites than dealumination processes and the latter is more likely to occur for Si(nAl) clusters that contain the maximum number of aluminum nearest neighbors.     

Optimizing control of simulated moving beds--linear isotherm

A new optimization based adaptive control strategy for simulated moving beds (SMBs) is proposed. A linearized reduced order model, which accounts for the periodic nature of the SMB process, is used for online optimization and control. The manipulated variables are the four inlet flow rates, the outputs are the raffinate and extract concentrations. Concentration measurements at the raffinate and extract outlets are used as the feedback information. The state estimate from the periodic Kalman filter is used for the prediction of the outlet concentrations over a chosen horizon. Predicted outlet concentrations are the basis for the calculation of the optimal input adjustments, which maximize the productivity and minimize the desorbent consumption subject to constraints on product purities. The realization of this concept is discussed and the implementation on a virtual eight column SMB platform is assessed, in the case of binary linear systems. For a whole series of typical plant disturbances it is shown that the proposed approach is effective in minimizing off-spec products and in achieving optimal SMB operation, also in the case where there are significant model uncertainties.     

非理想状态下的塔板理论模型

 在过程中 ,将流动相看成是由许多连续的塔板组成 ,每一塔板的高度与固定相塔板的高度相同。初始浓度的溶质被认为全部集中在流动相的第一塔板中 ;溶质在流动相和固定相之间动态分布。由于动力学因素的影响 ,当流动相流过一个塔板距离时 ,溶质不能够迅速地从固定相释放到流动相中 ,因此溶质在流动相和固定相中的分布浓度受到两个因素即反映系统热力学性质的分配系数P和反映系统动力学性质的释放概率因子α的影响。这一过程被认为是非理想状态下的过程。     

杯[6]芳烃-双金属卟啉仿P-450酶模型的研究Ⅳ.对异丙苯氧化的催化行为

研究了杯[6]芳烃-双金属卟啉在氧化异丙苯中的催化行为，结果表明杯[6]芳烃-双金属卟啉比之相应的金属卟啉具有更高的催化活性，并表现同样的选择性，生成苯乙酮和醇组份。此一结果同通常酞菁或其它如西弗碱大分子金属络合物催化下生成丙酮和酚不同。还考察了温度、轴向配体、催化剂用量及金属离子种类等对反应的影响，仔细地通过测定反应速度比较了反应的活性。     

Preparation and evaluation of a large-volume radial flow monolithic column

In this study, a 38 mL monolith with homogeneous porous structure was produced by a single polymerization from glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of porogens and an initiator. The uniform temperature distribution within the reaction system was achieved by adding reactant mixture continuously and enhancing the heat transfer ability of the polymerization system. Homogeneous porous structure in the monolith was proved by SEM and the pore size distribution profiles measured by mercury intrusion porosimetry. Experimental results from proteins separation indicated that the dynamic capacity and resolution of radial flow monolithic column were independent of flow rates. Furthermore, the pressure drop on the column was linearly dependent on the flow rate and did not exceed 1.7 MPa even at a flow rate of 50 mL/min, which proved that the prepared monolith could be used in the quick separation and preparation of biopolymers.     

F-T合成校正综合动力学模型

考虑了烯烃、醇与酸的再吸附及其非本征效应(烯烃、醇与酸在催化剂孔道中的扩散作用、物理吸附及溶解度效应)对产物分布的影响,推导了基于详细反应机理的亚甲基插入的烷基机理F-T合成校正综合动力学模型.利用文献数据对动力学模型进行了回归,获得了与文献报道结果相一致的动力学参数.由校正动力学模型计算的烷烃、烯烃、醇与酸产物分布及烯烃比、醇烃比及酸烃比与实验数据较好地吻合.动力学计算结果表明,在铁锰催化剂上,烷烃、烯烃、醇与酸生成的反应是平行竞争反应,烯烃、醇与酸在催化剂表面的再吸附及二次反应导致产物分布偏离了ASF分布.动力学研究还表明,相同碳数的醇与酸产物在催化剂表面上再吸附及二次反应的机会比相同碳数的烯烃大.通过比较相同碳数的烯烃、醇与酸的分子体积及沸点,指出了在铁锰催化剂上,低碳数的烯烃、醇与酸的再吸附及二次反应对产物分布影响的非本征效应中,烯烃、醇与酸的扩散阻力不是主导效应.     

Discrimination between ethanol inhibition models in a continuous alcoholic fermentation process using flocculating yeast

Discrimination between different rival models for describing the inhibitory effect of ethanol both on yeast growth and on fermentation was studied for a continuous process of alcoholic fermentation in a tower reactor with recycling of flocculating cells. Models tested include linear, parabolic, hyperbolic, exponential, and generalized nonlinear power-law types. The best expressions were identified under the criteria that all the kinetic parameters should assume acceptable values in a feasible range and should result in the best fit of the experimental data. The kinetic parameters were estimated from steady-state data of several sugar concentrations in feeding stream (S₀ = 160, 170, 180, 190, 200 g/L), constant dilution rate (D = 0.2 h^-1), recycle ratio (α = 13.6), and temperature (T = 30°C). The best model for the yeast growth was of power-law type, whereas for the product formation the best model was of linear type. These models were able to reproduce the trends of the process variables satisfactorily.     

Thermal degradation of cereal straws in air and nitrogen

Multigram quantities (2.5-10 g) of highly purified IgG were obtained within 4 h from serum by using Avid AL packed in a radial-flow column. Avid AL is an affinity gel containing a synthetic, low-mol-wt ligand capable of selectively binding IgG from serum of all animal species tested. By packing the gel in a radial-flow column up to 500 mL, a high flow rate of 50 mL/min can be achieved without adversely affecting the performance of the gel and the purity of the isolated antibody.