A review of MEMS-based microscale and nanoscale tensile and bending testing

Thin films at the micrometer and submicrometer scales exhibit mechanical properties that are different than those of bulk polycrystals. Industrial application of these materials requires accurate mechanical characterization. Also, a fundamental understanding of the deformation processes at smaller length scales is required to exploit the size and interface effects to develop new and technologically attractive materials. Specimen fabrication, small-scale force and displacement generation, and high resolution in the measurements are generic challenges in microscale and nanoscale mechanical testing. In this paper, we review small-scale materials testing techniques with special focus on the application of microelectromechanical systems (MEMS). Small size and high force and displacement resolution make MEMS suitable for small-scale mechanical testing. We discuss the development of tensile and bending testing techniques using MEMS, along with the experimental results on nanoscale aluminum specimens.     

纯铝在单轴应力循环作用下棘轮行为的试验研究

对纯铝进行了单轴应变控制和应力控制下的系统循环试验。对纯铝应变循环下的循环应变幅值、应变幅值历史、平均应变对循环特性的影响进行了揭示，对纯铝在非对称应力循环下的应力幅值、平均应力及其历史对循环蠕变〈即棘轮〉的影响进行了分析，得到了纯铝单轴循环行为的一些有意义的结果。     

AN EXACT METHOD OF BENDING OF ELASTIC THIN PLATES WITH ARBITRARY SHAPE

ＡＮ　ＥＸＡＣＴ　ＭＥＴＨＯＤ　ＯＦ　ＢＥＮＤＩＮＧ　ＯＦ　ＥＬＡＳＴＩＣ　ＴＨＩＮ　ＰＬＡＴＥＳ　ＷＩＴＨ　ＡＲＢＩＴＲＡＲＹ　ＳＨＡＰＥＺｈｏｕＤｉｎｇ（周叮）（ＲｅｃｅｉｖｅｄＡｐｒｉｌ１０，１９９５，ＲｅｖｉｓｅｄＡｐｒｉｌ２６．１９９６．Ｃ...     

考虑畸变影响的箱梁横向弯矩计算方法

为研究偏心垂向荷载作用下梯形截面单室箱梁的横向弯矩,对框架分析法计算箱梁横向弯矩的方程进行优化,并在刚性支承法的基础上提出一种更加简单的横向弯矩计算方法;与框架分析法不同,横向弯矩可采用能量变分法求解,建立以箱梁顶板剪力差为未知量的四阶控制微分方程,采用比拟的弹性地基梁解法解出剪力差,得出梯形截面单室箱梁横向弯矩的能量变分法解。对几种箱梁横向弯矩计算方法用两个算例进行验证,结果表明,能量变分法解将箱梁底板上的弯矩误差绝对值由15.41%降到了9.68%;本文方法得出的横向弯矩结果和有限元结果吻合较好,弯矩误差绝对值最大不超过6.01%;本文方法和能量变分法可有效降低箱梁底板上的弯矩误差,计算精度得到提高。     

Bending of elastic plates with a physically nonlinear inclusion

An infinite elastic isotropic plate with an elliptical, physically nonlinear inclusion loaded at infinity by uniformly distributed moments is considered. Surface loads are absent. The problem of the stress-strain state of the plate is solved in a closed form. It is shown that, for reasonably general stress-strain relations for the inclusion, the bending-moment field (and the corresponding curvatures) in the inclusion is homogeneous. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 6, pp. 152–157, November–December, 2006.     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

Benchmark solution of angle-ply piezoelectric-laminated cylindrical panels in cylindrical bending with weak interfaces

The bending problem of a simply supported, angle-ply piezoelectric-laminated cylindrical panel in cylindrical bending with weak interfaces is considered. A general spring-layer model is adopted to describe the weakness of imperfect interfaces. An exact analysis is performed via the state-space approach. A new system of physical variables is introduced and a variable substitution technique is employed to derive a state equation with constant coefficients. Numerical results are given to show the effect of weak interfaces.The work was supported by the National Natural Science Foundation of China (No. 10372088) and by the Korea Institute of Science and Technology Evaluation and Planning.     

90°弯管内流动的理论模型及流动特性的数值研究

从三维不可压缩雷诺时均Navier-Stokes方程出发,对90°弯曲管道内湍流流动进行数值模拟。网格划分采用六面体网格,湍流模型为RNGk-ε模型,在近壁区采用两层壁面模型进行修正,流场的计算结果与实验数据吻合较好。在此基础上,本文数值研究了来流方向对流场结构和流动特性的影响。得出在弯管流场中发生了分离现象,且随着来流侧滑角的增大,分离区范围增大。此外,随着来流从同一侧滑角变换至同一攻角时,横截面的二次流图像中也从具有两个对称主涡变成只具有一个主涡的现象。     

弱粘结的斜交铺设层合圆柱壳的柱形弯曲

导出了两端简文的具有弱粘结界面的任意斜交铺设层合圆柱壳柱形弯曲问题的一个精确弹性理论解。分析中采用线性弹簧模型来表征界面的弱粘结特性。引进新的物理量改写了基本方程,导出了对应的状态空间列式,并利用变量替换技术将该状态方程转换成常系数状态方程,从而方便求解。最后给出了数值算例,并讨论了弱界面的影响。     

宽板塑性弯曲成形过程中的板厚变化规律

根据宽板弯曲过程中的变形与应力分布特征，提出了一种计算弯曲过程中板料厚度随弯曲程度变化的新的近似解答方法．该方法基于塑性增量理论，应用塑性成形过程的体积不变假设和弯曲过程的平面假设．作为算例，得到了理想刚塑性材料的板料厚度、变薄系数以及应变中性层内移系数随板料弯曲内表面曲率半径变化的规律，并与实验数据进行了比较，两吻合良好．