可溶性聚硅酸铝铁的制备及其在废水处理中的应用

以赤泥为原料,制备了高效无机高分子絮凝剂——聚硅酸铝铁(PSAF),并将该絮凝剂用于处理工业废水．研究絮凝剂的使用效果与投加量、投加方式、pH值、搅拌条件及水样本身性能间的关系．     

流动注射化学发光法测定自来水中二氧化氯

在pH12．5的NaOH—KCl缓冲介质中，ClO2直接氧化Luminol能产生很强的化学发光，而且发光强度在一定的范围内与ClO2的浓度呈线性关系，据此建立了流动注射化学发光测定ClO2的新方法。探讨了最佳的发光条件，测定ClO2的线性范围为0．5—200μg／L，检出限为0．3μg／L。本法简便、怏速、灵敏，选择性和重复性较好，应用于自来水中剩余ClO2的测定，结果满意。     

Densities and Apparent Molar Volumes of Aqueous NaNO3 Solutions at Temperatures from 292 to 573 K and at Pressures Up to 30 MPa

Densities of four aqueous NaNO₃ solutions (0.100, 0.303, 0.580, 0.892 mol-kg^–1 H₂O) have been measured in the liquid phase with a constant-volume piezometer immersed in a precision liquid thermostat. Measurements were made at ten isotherms between 292 and 573 K. The range of pressure was 0.1–30 MPa. The total uncertainty of density, pressure, temperature, and concentration measurements were estimated to be less than 0.06%, 0.05%, 10 mK, and 0.014%, respectively. Values of saturated densities were determined by extrapolating experimental P- data to the vapor pressure at fixed temperature and composition. Apparent molar volumes were derived using measured values of density for the solutions and for pure water. The apparent molar volumes were extrapolated to zero concentration to yield partial molar volumes at infinite dilution. The temperature, pressure, and concentration dependence of partial and apparent molar volumes were studied. The measured values of density and apparent and partial molar volume were compared with data reported in the literature.     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

Molecular simulation of water behaviors on crystal faces of hydroxyapatite

The water behavior on (001) and (100) crystal faces of hydroxyapatite (HAP) were studied using molecular dynamics (MD) simulations. The study showed that the water molecules between the HAP faces were under conditions of strong electrical field and high pressure, and hence formed 2–3 well-organized water layers on the crystal surfaces. These structured water layers had ice-like features. Compared with the crystallographic [100] direction of HAP, the polarity along the [001] direction was stronger, which resulted in more structured water layers on the surface. The interaction of water molecules with the calcium and phosphate sites at the HAP-water interface was also studied. The results indicated the multiple pathways of water adsorption onto the HAP surfaces. This study revealed the formation and the detailed structure of water layers on HAP surfaces and suggested that the interfacial water played an important role in stabilizing the HAP particles in aqueous solutions. Translated from Chinese Journal of Inorganic Chemistry, 2006, 22(8): 1392–1400 (in Chinese)     

2,4-二甲氧基苯甲酰氯的合成

2,4-二羟基苯甲酸与硫酸二甲酯经甲基化反应得到2,4-二甲氧基苯甲酸(3);3与SOCl2发生氯化反应合成了2,4-二甲氧基苯甲酰氯(4)。较佳的氯化反应条件为:325mmol,苯70mL,AlCl3250mg,回流反应1.5h,重结晶溶剂为石油醚(90℃～120℃),总产率达74.1%。2～4的结构经1HNMR和FT-IR表征。     

工业用水中总铁含量的快速测定

介绍了以菲咯嗪－醋酸钠－醋酸缓冲溶液为显色体系、用自制的铁含量比色测定仪快速测定工业用水中总铁含量的方法。总铁含量≤０５ｍｇ／Ｌ时，标准偏差≤００３ｍｇ／Ｌ；总铁含量＞０５ｍｇ／Ｌ时，相对标准偏差≤５％。单次测定时间（包括样品处理）为１０～１５ｍｉｎ。采用单色光源及微型流动比色池，由蠕动泵和电子线路实现自动进样，直接显示测定结果。     

Dynamic Study of Gemini Surfactant and Single-chain Surfactant at Air／Water Interface

Molecular dynamics (MD) simulation are used to study the properties of gemini surfactant of ethyl-α,ω-bis(dodecyldimethylammonium bromide) (C12C2C12) and dodecyl-trimethylammonium bromide (DTAB) at the air/water interface, respectively. In the two systems,t he surfactant concentrations are both 28 wt.%, and other conditions are also the same. After reaching the thermodynamic equilibrium, the concentration profiles, the radial distributions functions (RDF) and the mean squared displacement (MSD) are investigated. The results reveal that the surface activity of C12C2C12 surfactant is higher than DTAB surfactant.     

Effects of Amplitude of the Radiofrequency Electromagnetic Radiation on Aqueous Suspensions and Solutions

The effects of radiofrequency (RF) (1–4) and magnetic fields (5–9) on the behavior of aqueous solutions and suspensions have been a popular subject in recent years. The mechanism of the magnetic “water memory” effect, though, is still largely unknown (5). In this work, we present evidence that the primary “receptor” of the electromagnetic radiation is a gas/liquid interface. Gas can be either already present in water or produced by the effects of electromagnetic fields. Perturbed gas/liquid interfaces require hours to equilibrate. Certain RF and magnetic signals also produce reactive oxygen and hydrogen species (superoxide, hydrogen peroxide, hydrogen, atomic hydrogen). The perturbed gas/liquid interface modifies the hydrogen bonding networks in water and also the hydration of ions and interfaces. Careful outgassing removes all of the effects of the electromagnetic fields, including the magnetic memory effect. The amplitude of the applied field influences the observed effects. Different amplitudes of RF radiation perturb the interfacial water in different ways and consequently affect the behavior of colloids and ions in specific manners. For instance, the bulk and template precipitation of calcium carbonate, zeta potentials of suspended colloids, rate of dissolution of colloidal silica, and attachment of colloidal silica to metal surfaces are modified in specific ways with the low amplitude or high amplitude RF treatments described in this paper. The solubility/diffusivity of gas species is also modified in a different manner, and it is probably at the core of the specificity of the RF amplitude effects.     

半导体氧化物光催化裂解水制氢

本文综述了半导体氧化物光催化裂解水制氢的反应机理,以及近年来半导体光催化裂解水制氢的研究进展。讨论了各种因素对材料光催化性能的影响以及改性方法,并对今后的研究方向提出了一些建议。