Evaluation of radiation damage behavior in polyimide aerogel by infrared camera and photoacoustic spectroscopy

In this work, the optical absorption and thermal properties of polyimide aerogel have been investigated by Infrared Camera, ultraviolet–visible and photoacoustic spectroscopy under low energy proton irradiation. The characterization method of the infrared camera can obtain the optical absorption ratio, and meanwhile get the information of specific heat capacity. Moreover, it can acquire the nature information of damaged area rather than the overall performance. The results show an increase in optical absorption after proton irradiation, which is in good coincidence with Ultraviolet–visible spectroscopy analysis. And the specific heat capacity decreased linearly with proton fluences, which can be attributed to the irradiation damage and carbonization in polyimide aerogel. The Raman spectra suggested the cleavage of chemical bonds and carbonization in polyimide aerogel. This work provides the novel, non-destructive and sensitive methods to characterize irradiation damage of aerogel.     

基于支座反力影响线曲率差分的等截面连续梁损伤识别方法

为了实现仅采用损伤状态信息对等截面连续梁进行损伤识别,通过推导三跨不等跨连续梁在移动荷载作用下的支座反力影响线,发现支座反力影响线求曲率并作差分后的曲线在损伤位置会发生突变,基于该现象提出了一种损伤定位方法,进一步建立了损伤程度计算方法,可对损伤程度进行较精确的定量。通过一三跨连续梁和一四跨连续梁工程实例的仿真分析,证明了支座反力影响线曲率差分指标损伤定位和相应的损伤程度定量方法对等截面连续梁损伤识别具有可行性。     

Synthesis,spectroscopic characterization (IR, 1H, 13C and 119Sn NMR,electrospray mass spectrometry) and toxicity of new organotin(IV) complexes with N,N′,O‐ and N,N′,S‐scorpionate ligands

New organotin(IV) derivatives containing the anionic ligands bis(3,5‐dimethylpyrazol‐1‐yl)dithioacetate [LCS₂]⁻ and bis(3,5‐dimethylpyrazol‐1‐yl)acetate [LCO₂]⁻ have been synthesized from reaction between (CH₃)₂SnCl₂ and lithium salts of the ligands. Mononuclear complexes of the type {[LCX₂](CH₃)₂SnCl} (X = S or O) have been obtained and fully characterized by elemental analyses and FT‐IR in the solid state and by NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy, conductivity measurements and electrospray ionization mass spectrometry in solution. The acute toxicity of new organotin(IV) derivatives on rat was studied, comparing their effect with those of dimethyltin chloride (CH₃)₂SnCl₂. The comparison of LD₅₀ of organotin(IV) complexes and (CH₃)₂SnCl₂ administered intraperitoneally, as a single dose, evaluated in vivo on rats, showed that toxicity decreases as follows: (CH₃)₂SnCl₂ > LCO₂ > LCS₂. The effect of these organotin(IV) complexes on DNA was evaluated in vitro and in vivo on rats treated with different doses of these compounds (1/20 LD₅₀ and 1/100 LD₅₀). The lymphocyte DNA status was assessed by the comet assay, a rapid and sensitive single‐cell electrophoresis technique, used to detect primary DNA damage in individual cells. After 36 h from the start of treatment the two new organotin(IV) derivatives induced a significant rise in comet assay parameters, indicating an increasing presence of damaged DNA. Copyright © 2005 John Wiley & Sons, Ltd.     

Radiation damage in soft X-ray microscopy

The rates of chemical transformation by radiation damage of polystyrene (PS), poly(methyl methacrylate) (PMMA), and fibrinogen (Fg) in a X-ray photoemission electron microscope (X-PEEM) and in a scanning transmission X-ray microscope (STXM) have been measured quantitatively using synchrotron radiation. As part of the method of dose evaluation in X-PEEM, the characteristic (1/e) sampling depth of X-PEEM for polystyrene in the C 1s region was measured to be 4 ± 1 nm. Critical doses for chemical change as monitored by changes in the X-ray absorption spectra are 80 (12), 280 (40) and 1230 (180) MGy (1 MGy = 6.242*ρ eV/nm³, where ρ is the polymer density in g/cm³) at 300 eV photon energy for PMMA, Fg and PS, respectively. The critical dose for each material is comparable in X-PEEM and STXM and the values cited are thus the mean of the values determined by X-PEEM and STXM. C 1s, N 1s and O 1s spectroscopy of the damaged materials is used to gain insight into the chemical changes that soft X-rays induce in these materials.     

A GENERALIZED MODELING FOR CEMENT-BASED MATERIALS UNDER LARGE RANGE OF COMPRESSION STATE

The aim of this study is to describe the main behavior of cement-based materials under large compression state based on the recent experimental research. In this paper, the strainstress relations are firstly analyzed and confining pressure state is regarded as low/medium/high state. A generalized cup modeling is introduced by a coupled deviatoric shearing, pore collapse and damage mechanism within thermodynamic framework. A series of numerical simulations are performed for the considered cement paste and concrete. Comparisons between numerical predictions and experimental results show that the proposed model is able to describe the main features of mechanical behavior under large range of compression state.     

Radiation damage in polymer films from grazing‐incidence X‐ray scattering measurements

Grazing‐incidence X‐ray scattering (GIXS) is widely used to analyze the crystallinity and nanoscale structure in thin polymer films. However, ionizing radiation will generate free radicals that initiate crosslinking and/or chain scission, and structural damage will impact the ordering kinetics, thermodynamics, and crystallinity in many polymers. We report a simple methodology to screen for beam damage that is based on lithographic principles: films are exposed to patterns of X‐ray radiation, and changes in polymer structure are revealed by immersing the film in a solvent that dissolves the shortest chains. The experiments are implemented with high throughput using the standard beam line instrumentation and a typical GIXS configuration. The extent of damage (at a fixed radiation dose) depends on a range of intrinsic material properties and experimental variables, including the polymer chemistry and molecular weight, exposure environment, film thickness, and angle of incidence. The solubility switch for common polymers is detected within 10–60 s at ambient temperature, and we verified that this first indication of damage corresponds with the onset of network formation in glassy polystyrene and a loss of crystallinity in polyalkylthiophenes. Therefore, grazing‐incidence X‐ray “patterning” offers an efficient approach to determine the appropriate data acquisition times for any GIXS experiment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1074–1086     

Radiation damage and annealing in Sb implanted diamond

The predicted, but as yet unobserved, intradonor absorption spectrum of the hydrogenic-like donors in CdF₂ crystals is presented. The role of phonon coupling in these spectra is discussed. From the data on the insulator-semiconductor transition in CdPbF₂ it is concluded that the dominant factor in convertibility of CdF₂ to a semiconducting state is its electron affinity, the largest among the fluorites (x≈4 eV).     

CALCULATION METHODS ON CRACK RESISTANCE CAPACITY OF CONNECTION COMPOSED OF CSSEUHSC COLUMNS AND SEC BEAMS

In order to investigate the calculation methods on crack resistance capacity of connection composed of cross shaped steel encased ultra high strength concrete (CSSEUHSC) columns and steel encased concrete (SEC) beams under cycle loads, six interior connection specimens were tested in the laboratory. A discussion on the crack resistance capacity was presented. Calculation methods of crack resistance capacity were deduced based on the experimental case and calculation results were in good agreement with the experimental results. The research results indicated that parameters of connection composed of CSSEUHSC columns and SEC beams with better crack resistance performance may be referred for engineering application.