Band splitting in overloaded isocratic elution chromatography I. The experimental evidence

A series of samples of increasing volume (from 0.001 to 4.0 cm3), containing the same constant concentration (40 g/l) of two simple compounds, ethylbenzoate and 4-tert.-butylphenol were injected on a Kromasil-C18 column with methanol-water (62:38. v/v) as the mobile phase. Complex band profiles were observed when the volume of the sample became large enough and strong band interference took place. The analysis of the fractions collected during the elution of the mixed band demonstrates that, for samples larger than 2 cm3, the band of 4-tert.-butylphenol is split into two separate bands, one eluted before and the other eluted after the band of ethylbenzoate. Such a phenomenon has never been observed yet in RPLC, under isocratic elution conditions.     

Janus particles with a functional gold surface for control of surface plasmon resonance

We report in this study the presence of Janus particles, which are candidates for use with electronic color papers. We used negatively charged polystyrene particles (370 nm) as the core particles, and gold was then sputtered onto their packed monolayer under several conditions. The sputtered particles were next redispersed into the aqueous medium by gentle sonication. Gold nanoparticles localized on one side of the cores could also serve as seeds for subsequent shell growth by electroless gold plating. Through these treatments, a series of well-dispersed Janus particles were obtained with gold nanostructures of different size and shape only on one side. Their dispersions showed different colors originating from the surface plasmon resonance absorption of gold nanoparticles localized on the hemisphere. The particles obtained by this approach have potential applications such as in sensors and electronic color paper.     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A sandwiched structure of CdS/Ag/ZnO nanorod photoanode exhibits greatly enhanced photoelectrochemical activity for solar hydrogen generation, due to synergistic effect of CdS nanocrystallites and plasmonic Ag nanoparticles for the enhanced optical absorption and the promoted charge carrier separation.     

Future of biological aerosol detection

Biological aerosol detection in real time is an urgent civilian and military requirement. Such detection capability will be useful in environmental monitoring, for example, in gathering information in perceived hazardous areas such as housing developments downwind of sewage treatment plants. To be truly functional, the instrument has to operate continuously, 24 h a day and 7 days a week with minimal maintenance and few false alarms. A novel concept is proposed. The system employs a rapid front-end warning/alarming mechanism based on optical technologies that provides useful information for protection decision makers. This is connected to a sample collector that feeds a slower back-end liquid chemistry system that provides analytical results to the medical personnel to assist in prophylaxis and therapy decisions. Experience gained from measuring fluorescence signals of single bacterial spores under flow cytometry (FCM) using UV excitation at 340-360 nm, was applied to concept testing of a prototype instrument, built to do the same for aerosols. This machine was capable of resolving particle size as well as fluorescence intensity of each particle under laboratory and field conditions; it was called the fluorescent aerodynamic particle sizer (FLAPS). This paper describes practical aspects of measuring biological aerosols when the results must be compared to reference samplers that provide culturable or “live” data. Treatment of particle size and fluorescence information is discussed with respect to FLAPS and reference data fidelity. Along with an objective method to evaluate FLAPS data correlation to reference data, an approach for determining limit of detection in the field is discussed. In addressing the back-end detector chemistry, we have prioritized a number of important biological characteristics that must be given to a clinician to help in prophylaxis and therapy decisions. A series of biochemical measurements are proposed to define the threat of a sample and different solutions are given to implement these tests. We predict that the future for biological detection looks promising for fluorescence in situ hybridization (FISH) techniques in identifying microorganisms. A conceptual instrument based on merging FCM and microchip-based analysis is described.     

Influence of the particle size distribution on the CRTA curves for the solid-state reactions of interface shrinkage type

The kinetic curves at infinite temperature for the solid-state reactions of the interface shrinkage type were drawn theoretically by taking account the particle size distribution in the sample mixture. The CRTA curves for the reactions with the particle size distribution can be drawn by utilizing the universal kinetic curves at infinite temperature. The proper kinetic treatment for the CRTA curves with the particle size distribution is discussed in connection with the property of the kinetic equation with respect to the particle size distribution. The present kinetic consideration is taken as a simulation for the reactions with a certain distribution in among the reactant particles, produced preferably by the mass and heat transfer phenomena during the thermoanalytical measurements. The merit of the rate jump method by a single cyclic CRTA curve is also discussed on the basis of the present results.     

SiO2/α-FeOOH和SiO2/γ-Fe2O3微粒的界面研究

α－FeOOH微粒由于其表面高活性，在转变成γ－Fe2O3的热处理过程中容易烧结，一旦这种烧结现象发生，得到的γ－Fe2O3磁粉磁性能大大下降[1]．为了克服这一困难，目前采用在α-FeOOH微粒表面包敷有机物[2]和无机物[3]来隔离颗粒，阻止其聚集．其中SiO2表面包敷处理是最令人感兴趣的研究课题之一[4，5]．SiO2是一种难烙性的非磁性材料，它包敷在α-FeOOH微粒表面外，不仅可提高α－FeOOH转变成γ－Fe2O3的热处理温度，有利于得到外形完好、晶格完整的γ－Fe2O3磁粉，而且由包效层与内核之间的界面相互作用引起的表面各向异性常…     

二次有机气溶胶的气体/粒子分配理论

本文重点评述了二次有机气溶胶形成的气体/粒子分配理论,简要介绍了它的发展和可能的应用.在大气中,气体有机物种的氧化可以产生半挥发性的有机化合物,二次有机气溶胶的形成可以用气体/粒子分配的吸收模型来评估.气体/粒子分配过程决定于半挥发性化合物的成分、浓度和蒸气压,以及吸收性材料的浓度和成分.在气体/粒子分配理论的基础上,人们又研究和开发出二次有机气溶胶的分子组分的气体/粒子分配的热力学模型,它可以用来预估气溶胶中液态水的含量、无机物的分布、亲水性和疏水性有机物的分布.二次有机气溶胶形成的化学机理和气体/粒子分配的热力学模型与加利福尼亚工学院三维都市/区域性大气模型相结合,可以用于气相和气溶胶相模拟.     

双嵌段共聚物薄膜介观结构的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative Particle Dynamics, DPD)方法模拟两平行平板间的双嵌段共聚物体系的介观结构. 模拟结果表明, 随板间距的增大, 体系分层数量的增加是不连续的, 在分层数量的增加过程中, 出现不规则结构的过渡区；聚合物链末端距随板间距的增大呈周期性振荡, 振荡幅度逐渐减小. 对模拟结果的分析表明：层状结构转变点与分层数量之间存在近似线性关系；层状结构转变点近似与共聚物链长的2/3次方成正比.     

On the Hydrolytic Stability of Organic Ligands in Al-, Ti- and Zr-Alkoxide Complexes

The complexation degrees of Al-, Ti- and Zr-butoxide (M) with unsaturated and saturated -diketones (3-allylpentane-2.4-dione-APD, acetylacetone-ACAC) and -ketoesters (methacryloxyethyl-acetoacetate-MEAA, allylacetoacetate-AAA, ethylacetoacetate-EAA) as organic ligands (L) were examined by IR and ¹³ C NMR spectroscopy and were found to be L:M 1.5. The hydrolytic stability of the ligands of the metal alkoxide complexes (L:M = 1) during hydrolysis/condensation reactions at the molar ratio h (H₂O : OR) = 0.5–2.0 decreases with increasing H$$₂O:complex ratio. Furthermore, the ligand stability depends on the type of metal in the complexes and decreases in the order Al- > Zr- > Ti-butoxide complexes at h=1. The ACAC ligand likewise shows in the Al-, Ti- and Zr-butoxide complexes a high hydrolytic stability (95–100%) at h=1 within 7 days. The Ti- and Zr-butoxide complexes with -ketoesters as ligand show at h=1> a release to a different extent e.g., up to 60% in the case of the MEAA-ligand in the Ti-butoxide complex after 2 days. In general, the hydrolytic stability of the ligands in the Ti-butoxide complexes (L:M = 1, h=1) decreases in the order ACAC > APD > AAA > EAA MEAA. The hydrolysis/condensation reaction of complexes having a weak ligand stability leads to larger particle sizes in the sols than those with stable ACAC ligands. The results contribute to a more controlled synthesis of sols and of new inorganic-organic hybrid polymers via the sol-gel process.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.