天然产物的酶法结构修饰

为赋予天然产物以新颖和特定的性质，往往需要对其进行结构修饰。结果修饰 可以通过化学法、微生物法和酶法实现。其中酶法由于条件温和，化学、区域和立 体选择性高，操作简便，环境友好等特点而发展非常迅速。本文介绍了糖和糖苷、 甾族化合物、β-内酰胺抗生素、氨基酸和多糖类等的酶法结构修饰，并指出组合 酶催化将成为现有组合化学方法的重要补充。     

Radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity and thermal diffusivity of fluids. It is well established that fluid radiation effects significantly influence these measurements, especially those for the thermal diffusivity. Corrections for radiation effects are based on the models developed and deviations of the measured data from the ideal line source model. In this paper, the effect of fluid radiation on the measurements of the thermal conductivity of n-pentane is presented. For comparison, the influence of thermal radiation effect on measurement of transparent fluids, such as argon is also shown. The difference between the influence of natural convection and thermal radiation is also demonstrated.     

Depolymerization and ionic conductivity of enzymatically deproteinized natural rubber having epoxy group

Preparation of liquid epoxidized natural rubber (ENR) was made by oxidative depolymerization of ENR in latex stage without loss of epoxy group. Epoxidation of fresh natural rubber latex, which was purified by deproteinization with proteolytic enzyme and surfactant, was carried out with freshly prepared peracetic acid. The glass transition temperature (T_g) and gel content of the rubbers increased after the epoxidation, both of which were dependent upon an amount of peracetic acid. The gel content was significantly reduced by oxidative depolymerization of the rubber with (NH₄)₂S₂O₈ in the presence of propanal. The resulting liquid epoxidized rubber (M_n≈10⁴) was found to have well-defined terminal groups, i.e. aldehyde groups and α-β unsaturated carbonyl groups. The novel rubber was applied to transport Li⁺ as an ionic conducting medium, that is, solid polymer electrolyte.     

微生物法分析天然抗氧化剂性能

建立了微生物抑菌活性纸片试验法，对葛根黄酮、诃子提取物、丹皮酚、竹叶黄酮等4种天然抗氧化剂的抗氧化性能进行了研究。竹叶黄酮、诃子、葛根具有较强的抗单线态氧能力，而丹皮酚抗单线态氧的能力较差。在不同的氧化还原微环境下，天然抗氧化剂可能表现出抗氧化能力，亦可能表现出促氧化能力，二者有着不同的反应机理。微生物抑菌活性纸片法可作为研究较复杂生物环境中抗氧化剂性能的一种简便方法。     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

不同粒径炭黑混合对复合型导电材料PTC性能的影响

研究了炭黑分散效果对具有PTC效应的高密度聚乙烯／炭黑导电复合材料性能的影响。实验结果表明，由不同粒度和比表面积的两种炭黑混合后填充的复合材料同由导电性能较好的乙炔炭黑填充复合材料比较，前者具有较低的渗滤阀值、较高的临界温度、优良的PTC特性以及电阻稳定性好的特点．     

Synthesis and properties of allenic natural products and pharmaceuticals

Nowadays, about 150 natural products comprising an allenic or cumulenic structure are known. The chemistry of these compounds has turned out to be a very attractive and prolific area of interest: advances in the isolation and characterization of new allenic natural products have led to the establishment of efficient synthetic procedures which in many cases also open up an access to enantiomerically pure target molecules. Inspired by the intriguing biological activities of many allenic natural products, allene moieties are now systematically introduced in pharmacologically active classes of compounds (steroids, prostaglandins, amino acids, nucleosides). The functionalized allenes thus obtained often exhibit impressive activities as mechanism-based enzyme inhibitors, cytotoxic, or antiviral agents. A prerequisite for further developments in this field is the efficient stereoselective synthesis of allene derivatives.     

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

Ga^3＋的新萃取体系的界面特性和胶团化作用研究

研究了Ｇａ~（３＋）协萃体系（Ｇａ~（３＋）－Ｄ_２ＥＨＰＡ－Ｈ_２ＭＰＡ－正十二烷－Ｈ_２ＳＯ_４）的界面吸附和胶团形成热力学，发现该萃取体系中［Ｈ_２ＭＰＡ］影响Ｄ_２ＥＨＰＡ和Ｈ_２ＭＰＡ的界面吸附性质。在中、高［Ｈ_２ＭＰＡ］范围内Ｄ_２ＥＨＰＡ与Ｈ_２ＭＰＡ的界面吸附行为相反，Ｄ_２ＥＨＰＡ的存在也影响Ｈ_２ＭＰＡ的界面吸附行为。研究了界面张力与各因素关系的数学模型，并获得某些胶团形成和界面吸附特性的物化参数。     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.