NMR analysis of the microstructure of poly(methyl acrylate-co-N-vinylcarbazole)

The microstructure of a series of high conversion copolymers of methyl acrylate (MA) and N-vinylcarbazole (NVC) was characterized by NMR. ¹H- and ¹³C-NMR spectra were assigned by comparison to the homopolymers and by using heteronuclear shift correlation spectroscopy. MA-centered triad distributions were obtained from the carbonyl carbon. Distributions of NVC sequences were determined from aromatic carbons 1 and 8a, and aromatic proton 1 These experimentally determined sequence distributions were compared to those calculated from reactivity ratios approximated from the copolymer compositions. Agreement was very good for low NVC content copolymers. Three signals were particularly useful in providing rapid assessment of the distribution of NVC units within low NVC content copolymers: proton 1 and carbon 1 of NVC and the carbonyl carbon of MA. © 1992 John Wiley & Sons, Inc.     

钇对2618合金组织及性能的影响

采用X射线，光学显微镜及扫描电镜等手段研究了2618合金中的组织与相结构，并研究了元素钆在2618合金中的存在形式及其对合金力学性能的影响。结果表明，微量钆元素在铝合金中是以化合物形式存在的；钆对合金中的铸态组织及Al9FeNi仃形态没有影响。由于微量钆的加入，降低了铜与镁在2618合金中的固溶量，减少了时效析出相A2CuMg数量，从而降低2618合金的室温强度帮在250℃的高温瞬时强度；但由于微量钆减少了铜与镁在2618合金中的扩散速度，延缓了时效机的粗化，并由于第二相数量的增多，因此提高了2618合金在250℃经100h高温热暴露后的高温瞬时强度。     

磁场对含稀土铝锂合金断裂特征的影响

以含铈铝锂合金为研究对象，研究了磁场对含稀土铝锂合金时效过程的影响，从断裂特征及微观组织两方面分析了磁场作用规律。实验结果表明：未加磁场时，合金的断裂特征以理断裂为主；扁平晶粒厚度不匀，在磁场作用下，此合金的断裂特征与微观组织发生明显改观，随磁感应强度增强，合金主断裂面上准解理断裂特征减弱，同时二次裂纹增多，分层比较升高；扁平晶粒厚度变薄，尺寸趋于均匀。用少体物理理论，探讨了磁场对含稀土合金原子扩散过程的影响，为进一步研究稀土元素在磁场中的行为及其局域效应提供了一定的实验依据。     

单一稀土Ce, La和混合稀土在工业纯铝中的作用

通过对比实验的方法，研究了稀土Ce，La和混合稀土对工业纯铝组织、电性能和机械性能的影响。结果表明：单一稀土La，Ce可降低工业纯铝的电阻率，提高工业纯铝的导电性，其中La的效果优于Ce．而混合稀土对电阻率几乎无影响；La，Ce和混合稀土均能减小工业纯铝的晶粒度，在其加入量为0．1％后细化效果明显，当其含量大于0．5％后细化效果趋于平缓，其中Ce的效果最佳，La次之，混合稀土最弱；单一稀土La，Ce在一定含量时可提高工业纯铝的σb6和δ，Ce的作用强于La，混合稀土对σb和δ的影响不明显。     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.     

往复挤压准晶增强快速凝固Mg92.5Zn6.4Y1.1合金

采用往复挤压工艺将快速凝固Mg92.5Zn6.4Y1.1合金薄带在330℃挤压2道次和4道次,然后正挤压制成Φ10 mm的棒材。用OM,TEM,XRD及DTA研究了往复挤压过程中准晶相I-Mg3YZn6弥散析出及对力学性能的影响。研究表明,往复挤压有利于快速凝固Mg92.5Zn6.4Y1.1合金薄带的焊合,获得组织致密、均匀、高强韧合金。往复挤压2道次,相组成为-αMg和准晶I-Mg3YZn6,脱溶析出纳米准晶相较少;4道次相组成为-αMg和准晶I-Mg3YZn6及MgZn相,脱溶弥散析出的纳米I-Mg3YZn6准晶相及MgZn相较多。往复挤压提高材料的拉伸性能,其主要原因是细晶强化和析出强化。     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

稀土离子氮化层的组织结构观察和分析

将纯稀土金属镧、铈、钕分别放入氮化炉中，对722M24钢进行离子氮化处理，用金相显微镜、扫描电子显微镜以及透射电镜观察和分析比较了稀土离子氮化和普通离子氮化氮化层的组织结构，发现在相同条件下，不同稀土元素对氮化影响是有区别的，其中铈、钕对离子氮化有一定的促进作用，可以抑制硬脆的Fe2-3N相形成，改善扩散层的脉状组织，但纯镧金属阻碍氮的扩散，抑制铁氮化物生成，降低扩散层深度，不利于加速氮化进程。     

Thermal analysis of low alloy Cr-Mo steel

The paper deals with results of thermal analysis of low-alloyed chromium-molybdenum steel. The methods of analysis were dilatometry, differential thermal analysis (DTA) and differential scanning calorimetry (DSC). The Ac₁ and Ac₃ temperatures of the steel samples measured by dilatometry and DTA during the heating period were in good agreement. Generated by cooling a martensitic structure first became apparent at 503 K. Tempering of the as-quenched samples showed the presence of the second tempering stage in the region between 473 and 573 K. At that stage heat capacity decreased from 0.48 to 0.32 J g^-1 K^-1, as a result of conversion of transition carbide due to heat consumption. After normalization of the as-quenched samples the heat capacity values were restored to between 0.42 and 0.47 J g^-1 K^-1 in the temperature range from 373 to 673 K. This revised version was published online in August 2006 with corrections to the Cover Date.     

混合稀土对共晶Al-2%Fe合金组织形态的影响

研究了富La混合稀土对共晶Al-2?合金组织形态的影响. 当混合稀土加入量较少时, 合金中的α-Al相为明显的胞状枝晶;随着混合稀土加入量的增加, α-Al枝晶优先形核生长得到抑制, 共晶Al3Fe相得到细化;当稀土加入量增至0.6% (质量分数)共晶Al3Fe相尺寸逐渐增大. 并对混合稀土对共晶Al-2?合金组织形态的影响机制进行了探讨.