CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

Methanol Suppression of Trichloroethylene Degradation byMethylosinus trichosporium (OB3b) and Methane-Oxidizing Mixed Cultures

The effect of methanol on trichloroethylene (TCE) degradation by mixed and pure methylotrophic cultures was examined in batch culture experiments. Methanol was found to relieve growth inhibition ofMethylosinus trichosporium (OB3b) at high (14 mg/L) TCE concentrations. Degradation of TCE was determined by both radiolabeling and gas chromatography techniques. When cultures were grown on methanol over 10 to 14 d with 0.3 mg/L TCE, OB3b degraded 16.89 ±0.82% (mean± SD) of the TCE, and a mixed culture (DT type II) degraded 4.55±0.11%. Mixed culture (JS type I) degraded 4.34±0.06% of the TCE. When grown on methane with 0.3 mg/L TCE, 32.93±2.01% of the TCE was degraded by OB3b, whereas the JS culture degraded 24.3 ±1.38% of the TCE, and the DT culture degraded 34.3 ±2.97% of the TCE. The addition of methanol to cultures grown on methane reduced TCE degradation to 16.21 ±1.17% for OB3b and to 5.08±0.56% for JS. Although methanol reduces the toxicity of TCE to the cultures, biodegradation of TCE cannot be sustained in methanol-grown cultures. Since high TCE concentrations appear to inhibit methane uptake and growth, we suggest the primary toxicity of TCE is directed towards the methane monooxygenase.     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.     

Catalytic Combustion of Methane over Ti-Pillared Clay Supported Copper Catalysts

A natural montmorillonite, produced from Laiyang of Shandong Province, was pillared by Tipolycations to form Ti-pillared clay (Ti-PILC), and characterized by BET surface area, infrared spectra and thermal analysis. The characterization results show that Ti-PILC has a larger surface area and more hydroxyl groups than that of the natural clay, thus was used as the catalytic carriers to prepare supported Cu catalysts (Cu/TiopILC). The 20%Cu/Ti-PILC with 10mmol/g of Ti/clay shows a high catalytic performance of methane combustion in the temperature range of 400-500℃.     

Bis(cyclopentadienyl)methan-verbrückte Zweikernkomplexe,V. Heteronukleare Co/Rh-, Co/Ir-, Rh/Ir- und Ti/Ir-Komplexe mit dem Bis(cyclopentadienyl)methan-Dianion als Brückenliganden

Bis(cyclopentadienyl)methane-bridged Dinuclear Complexes, V^[1]. – Heteronuclear Co/Rh-, Co/Ir-, Rh/Ir-, and Ti/Ir Complexes with the Bis(cyclopentadienyl)methane Dianion as Bridging Ligand^* The lithium and sodium salts of the [C₅H₅CH₂C₅H₄]^- anion, 1 and 2 , react with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [Ir(CO)₃Cl]n to give predominantly the mononuclear complexes [(C₅H₅-CH₂C₅H₄)M(CO)₂] ( 3, 5, 7 ) together with small amounts of the dinuclear compounds [CH₂(C₅H₄)₂][M(CO)₂]₂ ( 4, 6, 8 ). The ¹H- and ¹³C-NMR spectra of 3, 5 , and 7 prove that the CH₂C₅H₅ substituent is linked to the π-bonded ring in two isomeric forms. Metalation of 5 and 7 with nBuLi affords the lithiated derivatives 9 and 10 from which on reaction with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [C₅H₅TiCl₃] the heteronuclear complexes [CH₂(C₅H₄)₂][M(CO)₂][M′(CO)₂] ( 11–13 ) and [CH₂(C₅H₄)₂]-[Ir(CO)₂][C₅H₅TiCl₂] ( 17 ) are obtained. Photolysis of 11 and 12 leads almost quantitatively to the formation of the CO-bridged compounds [CH₂(C₅H₄)₂][M(CO)(μ-CO)M′(CO)] ( 14, 15 ). According to an X-ray crystal structure analysis the Co/Rh complex 14 is isostructural to [CH₂(C₅H₄)₂][Rh₂(CO)₂(μ-CO)] ( 16 ).     

Structural and dynamical properties of methane clathrate hydrates

Equilibrium molecular dynamics (MD) simulations have been performed in both the NVT and NPT ensembles to study the structural and dynamical properties of fully occupied methane clathrate hydrates at 50, 125, and 200 K. Five atomistic potential models were used for water, ranging from fully flexible to rigid polarizable and nonpolarizable. A flexible and a rigid model were utilized for methane. The phonon densities of states were evaluated and the localized rattling modes for the methane molecules were found to couple to the acoustic phonons of the host lattice. The calculated methane density of states was found to be in reasonable agreement with available experimental data.     

Ni/SiO2催化剂上甲烷催化裂解制氢

研究了固定床反应器上甲烷在Ni/SiO2催化剂上的裂解反应，并分别用O2、H2O进行催化剂失活/活化循环实验，并对催化剂用XRD进行分析。结果表明,Ni/SiO2催化剂具有良好的催化性能,甲烷转化率～40%，并能在150 min的时间内保持其活性，无论是用空气氧化还是水蒸气汽化，都能有效地活化已失活的催化剂。XRD实验显示，多次裂解－再生循环过程，对催化剂结构没有明显破坏。     

Dynamic surface tension of micellar solutions studied by the maximum bubble pressure method

A theoretical model for the dynamic surface tension of an air bubble expanding in micellar surfactant solution is proposed. The model accounts for the effect of expansion of the bubble surface during the adsorption of surfactant molecules (monomers) and the effect of disintegration of polydisperse micelles on the surfactant diffusion. Assuming small deviations from equilibrium and constant rate of expansion analytical expression for the surface tension and the subsurface concentration of monomers as a function of time is derived. The characteristic time of micellization is computed from the experimental data for two surfactants (sodium dodecyl sulfate and nonylphenol polyglycol ether) obtained by the maximum bubble pressure method.     

Raman Spectroscopic Studies of Methane Gas Hydrates

Abstract

A brief review of the Raman spectroscopic studies of methane gas hydrates is given, supported by some new measurements done in our laboratory.     

Numerical study on soot removal in partial oxidation of methane to syngas reactors

The serious carbon deposition existing in catalytic partial oxidation of methane (CPOM) to syngas process is one of the key problems that impede its industrialization. In this study, 3-dimensional unsteady numerical simulations of the soot formation and oxidation in oxidation section in a heat coupling reactor were carried out by computational fluid dynamics (CFD) approach incorporating the Moss-Brookes model for soot formation. The model has been validated and proven to be in good agreement with experiment results. Effects of nozzle type, nozzle convergence angle, channel spacing, number of channels, radius/height ratio, oxygen/carbon ratio, preheat temperature and additional introduction of steam on the soot formation were simulated. Results show that the soot formation in oxidation section of the heat coupling reactor depends on both nozzle structures and operation conditions, and the soot concentration can be greatly reduced by optimization with the maximum mass fraction of soot inside the oxidation reactor from 2.28% to 0.0501%, and so that the soot mass fraction at the exit reduces from 0.74% to 0.03%.