Purification and identification of 4-allylbenzene-1,2-diol: an antilisterial and biofilm preventing compound from the leaves of Piper betle L. var Pachaikodi

Antibiotic-resistant food-borne Listeriosis has been rising with up to 30% mortality threat in humans since several decades. Hence, discovering antilisterial from the extracts of ethnomedicinal plants may be of value as a novel antidote. In our preceding study, we reported that ethanolic extract of Piper betle L. var Pachaikodi leaves exhibited antibacterial activity towards Listeria monocytogenes MTCC 657. Consequently in the present study, the bioactive molecule responsible for anti-Listeria activity was purified and identified as 4-allylbenzene-1,2-diol. This identified bioactive compound may have significance while used as antimicrobials and/or food additives in food processing sector as evidenced by dual action: biofilm inhibition and pore formation on cell membrane.     

Influence of oxygen on soot formation during acetylene pyrolysis

Kinetic modeling of pyrolysis of acetylene diluted with argon showed a strong influence of small additives of oxygen on the routes of formation of soot nuclei. The influence of oxygen on various channels of formation and consumption of propargyl radicals C₃H₃, which are important precursors of soot formation, as well as the fundamental possibility of controlling the process of soot formation and its properties are considered.     

A facile synthesis of non-aqueous LiPO2F2 solution as the electrolyte additive for high performance lithium ion batteries

Constructing a reliable and favorable electrode-electrolyte interface is crucial to utilize the exceptional energy storage capability in commercial lithium-ion batteries. Here, we report a facile synthesis approach for the lithium difluorophosphate (LiPO₂F₂) solution as an effective film-forming additive via direct adding the Li₂CO₃ into LiPF₆ solution at 45 °C. Benefiting from the significantly reduced interface resistance (R_SEI) and charge transfer impedance (R_ct) of both the cathode and anode by adding the prepared LiPO₂F₂ solution into a baseline electrolyte, the cycling performance of the graphite||LiNi_0.5Mn_0.3Co_0.2O₂ pouch cell is remarkably improved under all-climate condition.     

4D Printing based piezoelectric composite for medical applications

Additive manufacturing (AM), otherwise known as three‐dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education, and medicine. Although a considerable amount of progress has been made in this field, additional research work is required to overcome various remaining challenges. Recently, one of the actively researched areas lies in the AM of smart materials and structures. Electroactive materials incorporated in 3D printing have given birth to 4D printing, where 3D printed structures can perform as actuating and/or sensing systems, making it possible to deliver electrical signals under external mechanical stimuli and vice versa. In this paper, we present a lightweight, low cost piezoelectric material based on the dispersion of inorganic ferroelectric submicron particles in a polymer matrix. We report on how the proposed material is compatible with the AM process. Finally, we discuss its potential applications for healthcare, especially in smart implants prostheses. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 109–115     

Effect of matrices and additives on phosphorylated and ketodeoxyoctonic acid lipids A analysis by matrix‐assisted laser desorption ionization‐mass spectrometry

Lipid A is a major compound of the outer membrane of gram‐negative bacteria and is a key factor of bacterial virulence. As lipid A's structure differs among bacterial species and varies between strains of the same species, knowing its modifications is essential to understand its implications in the infectious process. To analyze these lipids, matrix‐assisted laser desorption ionization‐mass spectrometry (MALDI‐MS) is a well‐suited method that is fast and efficient. However, there are limitations with the matrix and additives used, such as the suppression of signal or prompt fragmentations that could give a false overview of lipid A composition in biological samples. For a comprehensive analysis of the entire lipid A species present in a sample, we tested 16 matrices and 11 additives on two commercial lipids A. The first commercial one contains single phosphorylation group, and the second contains two phosphorylation and two ketodeoxyoctonic acid (KDO) groups. The lipid A containing KDO groups was essentially detected by the 3‐hydroxypicolinic acid (3‐HPA) matrix, whereas the monophosphorylated lipid A could be detected by 13 matrices out of the 16. We also demonstrated that the signal of diphosphorylated lipid A can be enhanced with the use of additives in the matrix. Our study indicated that the best conditions to obtain a clear signal of both lipids A without prompt fragmentation was the use of 3‐HPA with 10mM trifluoroacetic acid (TFA).     

Inhibition of cold-welding and adhesive wear occurring on surface of the 6061 aluminum alloy by graphene oxide/polyethylene glycol composite water-based lubricant

In this paper, graphene oxide/polyethylene glycol (GO/PEG) composite water-based lubricant was prepared by an ultrasonic dispersion method, and characterized and analyzed by Fourier transform infrared (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The suspension performance of GO/PEG composite water-based lubricant in water was verified by static sedimentation and centrifugation, and then, the prepared GO/PEG composite water-based lubricant was added into 304 stainless steel and 6061 aluminum alloy, and the coefficient of friction (COF) curve, average COF value, average wear rate, corresponding photomicrographs of balls and disks after wear, and energy-dispersive spectrometer (EDS) elemental analysis were used to illustrate the lubrication effect and lubrication mechanism. The results show that the GO/PEG composite water-based lubricant possesses excellent suspension ability in water, and the average COF value and wear rate of GO/PEG composite water-based lubricant are reduced by 78.8% and 88.8%, respectively, compared with water lubrication. The excellent lubrication effect of GO/PEG composite water-based lubricant can effectively reduce the cold-welding and adhesive wear phenomenon, mainly because GO/PEG composite water-based lubricant first fills the uneven surface of friction mating to form a high-quality lubricating film and then because of the special space structure of GO and the low shear between GO layers and the synergistic lubrication effect of GO/PEG.     

Tailored side‐chain architecture of benzil voltage stabilizers for enhanced dielectric strength of cross‐linked polyethylene

The synthesis and physico‐chemical properties of seven benzil‐type voltage stabilizers are reported. The benzil core is substituted with alkyl chains of different length that are linked to the benzil core via an ester, ether, or tertiary amine group. All additives can be melt‐processed with low‐density polyethylene (LDPE). Fourier‐transform infrared spectroscopy confirms that benzil compounds are not affected by the LDPE cross‐linking reaction induced by dicumyl peroxide. Moreover, a combination of gel content measurements, thermal analysis, and small‐angle X‐ray scattering indicates that the presence of benzil voltage stabilizers does not significantly alter the microstructure of cross‐linked polyethylene (XLPE). Electrical tree inhibition experiments under high‐voltage alternating current conditions show that all investigated additives substantially enhance the dielectric strength of the insulating material at a concentration of only 10 mmol kg^?1. The highest improvement in dielectric strength, of more than 70% with respect to reference XLPE, is obtained with voltage stabilizers, which carry short (methyl) side chains that are linked to the benzil core via an ester or tertiary amine group. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1047–1054     

Rapid determination of illegal additives chrysoidin and malachite green by surface-enhanced Raman scattering with silanized support based substrate

Silanized support based SERS substrate is applied to detect chrysoidin in Sprite at 0.01 mg/L and malachite green in fish pond water at 0.0001 mg/L. The SERS method is sensitive, cost-effective and convenient, which has great potential in detection of illegal additives and harmful substances.     

Electrolyte Additives for Room‐Temperature,Sodium‐Based,Rechargeable Batteries

Owing to resource abundance, and hence, a reduction in cost, wider global distribution, environmental benignity, and sustainability, sodium‐based, rechargeable batteries are believed to be the most feasible and enthralling energy‐storage devices. Accordingly, they have recently attracted attention from both the scientific and industrial communities. However, to compete with and exceed dominating lithium‐ion technologies, breakthrough research is urgently needed. Among all non‐electrode components of the sodium‐based battery system, the electrolyte is considered to be the most critical element, and its tailored design and formulation is of top priority. The incorporation of a small dose of foreign molecules, called additives, brings vast, salient benefits to the electrolytes. Thus, this review presents progress in electrolyte additives for room‐temperature, sodium‐based, rechargeable batteries, by enlisting sodium‐ion, Na−O₂/air, Na−S, and sodium‐intercalated cathode type‐based batteries.     

High‐Performance Sodium Metal Anodes Enabled by a Bifunctional Potassium Salt

Developing Na metal anodes that can be deeply cycled with high efficiency for a long time is a prerequisite for rechargeable Na metal batteries to be practically useful despite their notable advantages in theoretical energy density and potential low cost. Their high chemical reactivity with the electrolyte and tendency for dendrite formation are two major issues limiting the reversibility of Na metal electrodes. In this work, we introduce for the first time potassium bis(trifluoromethylsulfonyl)imide (KTFSI) as a bifunctional electrolyte additive to stabilize Na metal electrodes, in which the TFSI^? anions decompose into lithium nitride and oxynitrides to render a desirable solid electrolyte interphase layer while the K⁺ cations preferentially adsorb onto Na protrusions and provide electrostatic shielding to suppress dendritic deposition. Through the cooperation of the cations and anions, we have realized Na metal electrodes that can be deeply cycled at a capacity of 10 mAh cm^?2 for hundreds of hours.