高性能微通道板除气过程中电阻的变化

比较了高性能微通道板和标准型微通道板在经过相同或类似制管工艺处理前、后电阻的变化，测定了高性能微通道板分别在真空烘烤和2个不同阶段电子清刷后电阻随电压及温度的变化关系。实验结果表明：高性能微通道板的热稳定性优于标准型微通道板，其电阻温度系数为-0.007/℃；经过第二阶段清刷后，电阻随电压的变化缓慢，电压系数为-1.11×10^-4V^-1；用这种材料和工艺制作的低电阻、大动态范围、高稳定性微通道板可满足特种探测器的需求。     

Simulation of non-selfadjoint control of thin elastic plates in the presence of conservative in-plane forces

Summary Based on the analysis presented in [1], a closed-form solution for the response of a controlled plate to a transversely applied dynamic loading is presented. Both the applied loading and the control are considered to be continuously distributed. The results and the corresponding parametric study are presented for two common boundary conditions of SSSS and SFSF in the plates. Received 11 March 1997; accepted for publication 18 March 1998     

On two models in the three-dimensional theory of stability of composites

A comparative analysis is made of the infinite-fiber and finite-fiber models in the three-dimensional theory of stability of composites. The results analyzed have been obtained using the three-dimensional linearized theory of stability of deformable bodies. A historical sketch is given of the theory of stability for and approaches used in the mechanics of laminated and fibrous composite materials Translated from Prikladnaya Mekhanika, Vol. 44, No. 8, pp. 3–31, August 2008.     

Maximum principles for a fourth order equation from thin plate theory

This paper focuses on a nonlinear equation from thin plate theory of the form Δ(D(x)Δw)−(1−ν)[D,w]+c(x)f(w)=0. We obtain maximum principles for certain functions defined on the solution of this equation using P-functions or auxiliary functions of the types used by Payne [L.E. Payne, Some remarks on maximum principles, J. Anal. Math. 30 (1976) 421-433] and Schaefer [P.W. Schaefer, Solution, gradient, and laplacian bounds in some nonlinear fourth order elliptic equations, SIAM J. Math. Anal. 18 (1987) 430-434].     

复合材料迭层板弯曲分步分析法

本文提出了一种用于分析复合材料迭层板弯曲的新方法。首先利用经典理论进行初步分析,之后,据所得横向剪力,设定横向剪切应变,再进一步分析。本文方法基本未知函数少,基本方程易解,计算精度较高。     

各向异性介质的平行平板干涉

提出了各向异性介质平行平板干涉中的相位差计算方法.证明了e光干涉产生的条纹为严格的椭圆曲线,椭圆长短轴的比值等于o光主折射率与e光主折射率之比,而与晶体厚度、干涉级等参数无关.拍摄了实验干涉图,并用最小二乘法对干涉条纹进行椭圆曲线拟合,结果与理论完全一致.本文提出的方法可用于晶体主折射率比值的精确简便测量.     

Boundary integral equations in time-dependent bending of thermoelastic plates

The initial-boundary value problems with the Dirichlet and Neumann boundary conditions arising in the theory of bending of thermoelastic plates with transverse shear deformation are reduced to time-dependent boundary integral equations by means of layer potentials. The solvability of these equations is then investigated in Sobolev-type spaces.     

强脉冲载荷作用下弹-塑性薄圆板的大挠度动力响应

利用有限变形弹塑性连续体的最小加速度原理 ,建立了分析圆板动力响应问题的数值方法 ,并通过对均匀分布的脉冲载荷作用下铰支圆板位移响应的细致分析 ,探讨了响应过程中的饱和冲量现象 ,指出对于高载范围内的脉冲载荷 ,相应于最大变形的饱和冲量确实是存在的。结果还表明 ,虽然圆板的弹塑性动力分析非常复杂 ,但基于最小加速度原理的数值计算方法却具有简单、直接的优点。     

Flow of a viscoelastic fluid with the fractional Maxwell model between two side walls perpendicular to a plate

The unsteady flow of a viscoelastic fluid with the fractional Maxwell model between two side walls perpendicular to a plate is investigated. Exact solutions for the velocity field are established by means of the Fourier and Laplace transforms. The similar solutions for Maxwell and Newtonian fluids can be obtained as limiting cases of our results. In the absence of side walls, all solutions that have been determined reduce to those corresponding to the motion over an infinite plate.     

Straightness Measurement Using Laser Diode and CCD Camera

１ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｍａｎｕｆａｃｔｕｒｅａｎｄａｓｅｍｂｌｅｏｆｍｏｄｅｒｎｍａｃｈｉｎｅｓａｎｄｉｎｓｔｒｕｍｅｎｔｓ，ａｎｉｎｄｉｓｐｅｎｓａｂｌｅｒｅｑｕｉｒｅｍｅｎｔｉｓｔｈｅｃｏｎｔｒｏｌｏｆｆｏｒｍａｎｄｐｏｓｉｔｉｏｎｅｒｏ...