Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Crystal Structure of Lappaconitine Hydrobromide Hydrate

The structure of lappacontine hydrobromide hydrate was solved by an x-ray structure analysis.     

Conformational analysis of 2-oxo-1,2,3,4,-tetrahydropyridine and its alkyl- and phenyl-substituted derivatives

The molecular geometries and inversion barriers of the rings in 2-oxo-1,2,3,4-tetrahydropyridine and its alkyl-substituted (Me, Et, Prⁱ, or Bu^t) and phenyl-substituted derivatives were calculated by the molecular mechanics method. The introduction of substituents has no substantial effect on the equilibrium conformation of the heterocycle (a distorted sofa). For 4-alkyl- and 3-alkyl-substituted derivatives (except for 4-Me and 4-Et derivatives), an axial orientation of the alkyl group is more favorable. The phenyl substituents have equatorial and axial orientations at postions 4 and 3, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1584–1586, September, 1997.     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

Scaling Function Between the Exponential-6 and the Generalized Lennard-Jones Potential Functions

The van der Waals forces for non-bonded interaction can be expressed either by the Exponential-6 or by the Lennard-Jones(m-n) potential functions, whereby m > n. Hitherto a relationship exists between the Exponential-6 and the Lennard-Jones(12-6) potential functions, with a scaling factor = 13.772 at or near the equilibrium and = 12.0 for long range interaction. This paper attempts to develop relationships between Exponential-6 and a more generalized Lennard-Jones(m-n). Analysis reveals that the relationship exists only when n = 6 and that two sets of scaling factors (as functions of index m) applies for the relationship between Exponential-6 and the Lennard-Jones(m-6), whereby m > 6.     

Improvement of the spinning electrophorometer for zeta potential measurements

In this study, bubbles are held by centripetal force at the center of a rotating cylinder filled with an aqueous solution. Their velocities along the axe of rotation, after application of an electrophoretic force, are used for the calculation of the so-called electrokinetic potential. But this process necessitates the elimination of the electro-osmosis which occurs on the interior sides of the glass cylinder by superposing a concurrent force on the bubble. Efficiency of DEAE-Dextran reticulated with 1,4 Butanediol Diglycidyl Ether can be tested by the observation of a cloud of latex microspheres injected in the interior of the tube and allowed to move in respect with the application of an electric field. The experimental control of these velocity profiles proves the adequacy of the polymer for many cases such as surfactant solutions, presence of electrolytes, utilization with moderate pH.The dynamic interpretation of the electrophoretic motion of bubbles is possible by considering that small ones behave like rigid spheres moving in a rotating fluid. In the second part of this paper and in a previous publication, we have experimentally proved that the use of the theoretical expressions of the forces involved for rigid spheres is justified for small bubbles. So, the electrokinetic potential can be expressed versus the velocity, leading to possible interpretations of the adsorption on gas-water interfaces.     

Fractal phenomena in molecular mechanics calculation

It is proposed that in molecular mechanics calculation points belonging to various stable or meta-sta-ble conformtrs are mixed up and form fractal structures in conformation space.The calculation results show the following two phenomena:(i)Two levels of structure with fractal feature were observed.Around the conformer without mirror symmetry points belonging to the conformer and its enantiomer are mixed up and form the first level of fractal structure; on the boundary of the attractive basin o{ each atlractor,points belonging to different attractors form the second level of fractal structure.(ii) The variation of molecular mechanics parameters will influence the structure and area of each attractive basin significantly The above phenomena may become the basis of a new method for solving the troublesome multi-minimum-point problem in molecular mechanics calculation.     

Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

Pb2＋在液/液界面迁移的电化学研究及其应用

用循环伏安法研究了双硫腙络合推动Pb^2＋在水/乙酰丙酮界面迁移的伏安过程. 实验证明, 该过程是受扩散控制的不可逆过程, Pb^2＋由水相转移到有机相中, 与双硫腙形成络合物Pb(DzH)₂. Pb^2＋的峰电位在－0.3 V处, 并且在5× 10^－6～0.1 mol•L^－1范围内与峰电流成正比. 这一方法为工业废水中铅的在线、现场测定提供了可靠、灵敏的检测方法.     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.