Deformational Properties of Irradiated Composite Materials Based on PET and PE

Considering the wide applicability of polymeric composite materials, heterogeneous blends of poly(ethylene terephtalate) (PET) and polyethylenes of high and low densities (HDPE and LDPE, respectively) were investigated. Rheological (the flow-behavior index), mechanical (the yield strength and the Charpy impact strength), and morphological (crystallinity and the melting temperature) properties were detected for individual blend components and different blend compositions. A radiation treatment (-rays) was applied to improve certain characteristics of the heterogeneous blends. The results of this investigation show that the radiation modification can be successfully used to improve some physical properties of the PET-based blends and to choose individual blend components, optimum irradiation conditions, and desirable blend compositions, which allows producing materials with a predictable set of mechanical properties.     

A novel electron scattering apparatus combining a laser photoelectron source and a triply differentially pumped supersonic beam target: characterization and results for the resonance

A novel electron scattering apparatus for high resolution studies of angle-differential elastic and inelastic electron scattering from atoms and molecules in the gas phase is described and its performance characterized. It combines a laser photoelectron source, a triply differentially pumped collimated supersonic beam target (half angle 0.015 rad, background to beam density ratio < 0.01), and several electron multipliers for simultaneous detection of elastically scattered electrons and metastable atoms (or molecules) due to inelastic scattering. In detailed test measurements of the yield for the production of metastable He^*(2³S₁) atoms around its threshold, the dependence of the overall energy width on various experimental parameters has been investigated. So far a resolution down to 7 meV (FWHM) has been obtained. Under such conditions we have investigated the profile of the He^- (1 s 2 s ^{2 2} S _1/2 ) resonance at the scattering angles 22 ^° , 45 ^° , and 90 ^° . From a consistent fit of the measured profiles by resonant scattering theory we determine a new value for the resonance energy ( E _r = 19.365(1) eV) and an accurate resonance width ( Γ = 11.2(5) meV). These results are consistent with the previously recommended values. Received 23 July 2002 Published online 29 October 2002 RID="a" ID="a"e-mail: hotop@physik.uni-kl.de RID="b" ID="b"Permanent address: Department of Physics and Astronomy, Drake University, Des Moines, IA 50311, USA.     

Theoretical total ionization cross-sections of CH x,CF x,SiH x,SiF x ( ) and CCl 4 targets by electron impact

Total ionization cross-sections of electron impact are calculated for the molecular targets CH_x, CF_x, SiH_x, SiF_x (x = 1-4) and CCl₄ at incident energies 20-3 000 eV. The calculation is based on Complex Scattering Potential approach, as developed by us recently. This leads to total inelastic cross-sections, from which the total ionization cross-sections are extracted by reasonable physical arguments. Extensive comparisons are made here with the previous theoretical and experimental data. The present results are satisfactory except for the CF_x and SiF_x (x = 1-3) radicals, for which the experimental data are lower than most of the theories by more than 50%. Received 23 May 2002 / Received in final form 24 October 2002 Published online 21 January 2003 RID="a" ID="a"e-mail: knjoshipura@yahoo.com     

Stress State of Multilayer Structural Elements Subjected to Static Loading and Optimization of Laminated Beams and Bars

The results of FEM investigation of the triaxial stress state in multilayer structural elements subjected to axial and bending loads are presented. The distribution regularities of the stiffness and stresses or strains depending on the geometric and mechanical characteristics of layers and their position in the cross section of beams and bars are examined. The optimization of these elements is carried out using the dependences of the Bareisis—Paulauskas method and the Optim-98 computer program created by the present authors. As the optimization criteria, the strength, stiffness, mass, and cost of the structural elements are considered.     

Changes in ADC caused by tensile loading of rabbit achilles tendon: evidence for water transport

Water diffusion measurements were performed on rabbit Achilles tendons during static tensile loading and tendons in an unloaded state. The apparent diffusion coefficient (ADC) was measured along two directions: parallel and perpendicular to the long axis of the tendon. Tendons were studied after being prepared in two ways: (a) after being stored frozen in phosphate-buffered saline (PBS) and (b) freshly isolated. Statistically significant directional anisotropy was observed in the ADC in all tendons. The ADC was significantly greater in the direction parallel to the long axis of the tendon than in the perpendicular direction. The anisotropy is attributed to the greater restrictions seen by the water molecules in the perpendicular direction and is consistent with the known geometry of the tendon. Storage in PBS caused tendons to swell. This increased the ADC measured along both directions and reduced the anisotropy. The existence of anisotropy in the ADC was not related to the orientation of the specimen in the magnet. The ADC increased along both directions following the application of a 5-N tensile load; the increase was greatest along the perpendicular axis of the tendon. In order to determine whether load-related changes in the ADC reflected changes in interfibrilar spacing, we used electron microscopy to measure load-related changes in fibril spacing. Load-related changes in fiber spacing could not account for the observed changes in the ADC. The increase in ADC caused by loading was attributed to the extrusion of tendon water into a bulk phase along the outside surface of the tendon. In PBS-stored samples, enough fluid was extruded that it could be visualized. The transient response of the ADC to a 5-N tensile load was also studied. The absolute ADC in both directions increased with loading and recovered to baseline upon unloading. The transient changes in ADC, for both loading and unloading, had a mean time constant of approximately 15 min. The magnitude of the load-induced transient ADC changes was comparable to that seen in the static-loading experiments.     

人造地球卫星运动方程的代数动力学算法数值解

代数动力学算法首次被用于求人造地球卫星运动方程的数值解，在四阶算法下，与Runge-Kutta算法和辛算法的计算结果作了比较.结果表明，代数动力学算法对于人造地球卫星长期轨道的计算有较高的精度.并讨论了地球四极和八极带谐项对卫星轨道的影响. 关键词： 人造地球卫星运动方程 代数动力学算法数值解 地球四极和八极带谐项对卫星轨道的影响     

Study of the conditions for the effective energy transfer in a process of acceleration and collision of the thin metal disks with the massive target

Efficiency studies of laser driven thin metal disks acceleration using the first harmonic (λ₁=1.315 μm) of the Prague Asterix Laser System (PALS) and subsequent craters creation produced by collisions of these disks with massive targets are presented. Several different disks made of aluminium and copper foils with diameters of 300 μm and 600 μm and thicknesses of 11 μm (Al) and 3.6 μ m (Cu) were employed. Disks were placed at the distance of either 100 μ m or 300 μm in front of aluminium massive targets. The following irradiation conditions were used: the laser beam energy of 120 J, the focal spot diameter of 200 μm, and the pulse duration of 0.4 ns (FWHM). A three-frame interferometric system was employed to determine electron density distributions in plasma corona. Shape and volume of craters were obtained by crater replica technology and microscopy measurements. The aim of these investigations was to analyse conditions leading to the most effective energy transfer in the process of collision of the accelerated disks with solid targets. The overall efficiency of these processes was characterized by the volume of craters produced in such targets.     

Electron-impact dissociation and transient properties of a stored LiH2 - beam

The fragmentation of LiH₂ ^- anions after electron impact was investigated at the heavy-ion storage ring TSR. The main reaction channel was found to be electron detachment followed by a breakup into LiH + H. In the first ms after production of the molecular ions in a cesium sputtering ion source, additional contributions were observed in the Li + H₂ and Li^- + H₂ channels, hinting at an initial population of a short-lived state of the anion. To gain a better understanding of the mechanisms underlying the observed behavior of the system, ab initio calculations of relevant potential energy surfaces were performed at selected geometries. The experimental findings are discussed in the light of these calculations.     

Application of R-matrix method to electron-H<Subscript>2</Subscript>S collisions in the low energy range

Electron-H₂S collision process is studied using the R-matrix method. Nine low-lying states of H₂S molecule are considered in the R-matrix formalism to obtain elastic integral, differential, momentum transfer and excitation cross sections for this scattering system. We have represented our target states using configuration interaction (CI) wavefunctions. We obtained adequate representation of vertical spectrum of the target states included in the scattering calculations. The cross sections are compared with the experiment and other theoretical results. We have obtained good agreement for elastic and momentum transfer cross sections with experiment for entire energy range considered. The differential cross sections are in excellent agreement with experiment in the range 3–15 eV. A prominent feature of this calculation is the detection of a shape resonance in ²B₂ symmetry which decays via dissociative electron attachment (DEA). Born correction is applied for the elastic and dipole allowed transition to account for higher partial waves excluded in the R-matrix calculation. The electron energy range is 0.025–15 eV.     

Auger electron emission from metals induced by low energy ion bombardment: Effect of the band structure and Fermi edge singularity

Calculations of the kinetic energy distributions of electrons ejected from plane metal surfaces by Auger neutralization of slow monoatomic ions are reported. A many body theory is used that includes both the band structure of the target material and the Fermi singular response of metal electrons (to the sudden neutralization of the projectile). Application is made to experiments of electron emission from polycrystalline Al by Ar⁺-ions, at varying incident energies and angles. Adjustment of the broadening parameters of the distribution of shake-up electrons leads to excellent agreement between the theory and the measurements.