Finding the buckling load of non-uniform columns using the iteration perturbation method

The aim of this study is to calculate the critical load of variable inertia columns. The example studied in this paper can be used as a paradigm for other non-uniform columns. The wavelength of equivalent vibratory system is used to calculate the critical load of the trigonometrically varied inertia column. In doing so, the equilibrium equation of the column is theoretically studied using the perturbation method. Accuracy of the calculated results is evaluated by comparing the solution with numerical results. Effect of improving the initial guess on the solution accuracy is investigated. Effects of varying parameters of the trigonometrically varied inertia and the uniformly tapered columns on their stability behavior are studied. Finally, using the so-called “perfectibility” parameter, two design goals, i.e., being lightweight and being strong, are studied for the discussed columns.     

Influence of pressure on the relative population of the two lowest vibrational levels of the C <Superscript>3</Superscript> Π<Subscript>u</Subscript> state of nitrogen for electron beam excitation

Continuous and pulsed 12 keV electron beams were used to excite nitrogen within a gas cell at pressures ranging from 10 to 1400 hPa. The pressure dependence of the ratio of photon fluxes for emission from vibrational levels v'=0 and 1 of the C ³Π _u state has been studied. The results confirm the presence of a collisional excitation mechanism populating v'=0, 1 in addition to electron impact excitation. Rate constants of (1.27 ±0.04)×10^-11 cm³s^-1 [ v'=0] and (2.68 ±0.08)×10^-11 cm³s^-1 [ v'=1] were measured for C ³Π _u quenching by ground state nitrogen. For electron beam conditions relative excitation efficiencies of 1:0.59:0.22 for vibrational levels 0, 1 and 2 were calculated. The recorded flux ratios are compared with the predictions given by a vibrational relaxation model.     

飞秒激光激发空气电离的阈值研究

报道在脉宽50fs—22ps，波长800nm脉冲激光作用下的空气电离阈值的研究结果.利用探测等离子体发光信号的方法，实验测量了激发空气电离所需的阈值激光强度.结果表明，当激光脉冲宽度从50fs增加到22ps时，阈值光强I_th从8.7×10¹⁴W/cm²下降到2.7×10¹³W/cm²；I_th经历了由迅速降低逐渐发展为缓慢降低的过程.在50fs—1p     

A novel pose and illumination robust face recognition with a single training image per person algorithm

In the real-world application of face recognition system, owing to the difficulties of collecting samples or storage space of systems, only one sample image per person is stored in the system, which is so-called one sample per person problem. Moreover, pose and illumination have impact on recognition performance. We propose a novel pose and illumination robust algorithm for face recognition with a single training image per person to solve the above limitations. Experimental results show that the proposed algorithm is an efficient and practical approach for face recognition.     

W/Cu梯度功能材料的高热负荷性能研究

用等离子体喷涂和热压方法制作了W/Cu梯度功能材料(FGM)样品,用大功率ND∶YAG激光对其进行了高热负载模拟实验.结果表明,在100～400MW@m-2的瞬时(脉冲宽度为4ms)热负载下,经过200～700次热循环,未发现有W-Cu复合体开裂.在123MW@m-2的功率密度下作用700次,发现钨表面有再结晶现象及严重的晶界腐蚀和裂纹,再结晶的平均晶粒尺寸约为5～10μm,垂直于表面呈柱状结构,再结晶层厚度约20～30μm.由于激光的淬冷效应,晶粒生长的趋势并不明显.在398MW@m-2功率密度下出现了明显的腐蚀坑,坑内呈疏松的蜂窝结构,坑的边缘出现了明显沉积区,能谱分析表明沉积区集聚了大量的金属杂质.等离子体喷涂试样比热压试样更易产生晶界的断裂的裂纹.在相同的热负荷条件下,W/Cu FGM的重量损失低于石墨材料的重量损失.     

Dynamic adhesive strength of fiber-polymer systems

A new device for studying the dynamic adhesive strength is created. A procedure for determining the dynamic adhesive strength in fiber—polymer systems under impact loading (pull-out technique) is developed. The adhesive strength of the interface of polymer—steel wire joints formed by polymers of different chemical nature (epoxy resin, polysulfone, and polypropylene) is examined. It is shown that the dynamic adhesive strength grows as the loading rate increases for all the systems under investigation and that the relationship between the adhesive strength and the loading rate, , over a wide range of rates can be described by two straight lines corresponding to the quasi-static and impact loading, respectively. When passing from the quasi-static to dynamic loading, the character of scale relations of the adhesive strength does not change.Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 689–700, November–December, 1999.     

Dissociative attachment of low-energy electrons to vibrationally excited molecules using a photoelectron source

The process of dissociative attachment (DA) of low-energy electrons ) to vibrationally excited sodium dimer molecules is studied with high electron energy resolution () in a supersonic molecular beam. A novel photoelectron source, based on two-step photoionization of the sodium atoms in the beam, may deliver a current of up to 1 nA and has been used with a current of typically 0.2 nA in this experiment. The energy dependence of the rate of sodium anion formation is determined by ion detection based on a time-of-flight analysis. The molecules are selectively excited to levels using the technique of coherent population transfer by delayed pulses (STIRAP). The comparison of the experimental data with recent resonance model calculations based on improved potential curves reveals generally good agreement for levels v ”>12. For some distinct differences between theoretical and experimental results persist. Received: 21 November 1998 / Received in final form: 7 April 1999     

Total cross-sections for positron scattering by a series of molecules

The additivity rule is employed to obtain the total (elastic+inelastic) cross-sections for positron scattering from molecules including a number of diatomic, polyatomic molecules (H₂, N₂, HCl, CO₂, NH₃, SF₆, CH₄, C₂H₄ and C₃H₈) over an incident energy range of 10-1000 eV. The total cross-sections (TCS) of the constituent atoms of molecules are obtained by employing a complex optical model potential (composed of static, polarization and absorption potential). The present results are compared with experimental data and other theoretical calculations, good agreement is obtained in intermediate- and high-energy region. Received: 11 November 1997 / Revised: 23 March 1998 / Accepted: 16 June 1998     

Optimum load scheduling of nuclear-hydro-thermal power systems

This paper considers the problem of short-term optimal operation of nuclear-hydro-thermal electric power systems. The solution is obtained by use of a functional analytic optimization technique that employs the minimum norm formulation.A power system with an arbitrary number of generating stations is considered. The limited flexibility exhibited by the thermal nuclear reactors, when operating in a load-following mode, is accounted for by means of a model of the xenon concentration in their cores. The nonlinear effects induced by trapezoidal water reservoirs and the time delay of the water flow between upstream and downstream hydroplants is taken into consideration as well.A two-level iterative scheme of the feasible type is proposed for implementing the optimal solution.This work was supported in part by the National Research Council of Canada, Grant No. A-4146.     

Dynamic stability of a curved rail under a moving load

The stability of a curved rail under a constant moving load has been investigated using a linear theory; critical speeds of the moving load, and the dynamic rail deflections and rotation were calculated. The effect of the foundation was included through distributed linear springs. It was assumed that the moving load remains in constant contact with the rail and travels along a fixed path on the rail head.