X波段介质和金属膜片混合加载行波加速结构的传播特性计算及模型腔的有关研究

计算了X波段(f=9.37GHz)介质和金属膜片混合加载行波加速结构的TM₀₁模和HEM₁₁模的色散曲线, 结果表明HEM₁₁模的截止频率比TM₀₁模的低, 说明与盘荷波导相比, 该种新加速结构单束团的BBU效应得到改善.实验研究优选得到了适用于该种新加速结构的介质(ε_r=5.812). 采用MAFIA程序优化设计了模型腔, 测试频率与设计的数值吻合得很好.     

一种基于粒子滤波的测向定位跟踪算法

基于多站测向定位提供的目标辐射源方位角信息,提出了一种基于粒子滤波的测向定位跟踪算法.该算法采用序贯蒙特卡罗的粒子滤波技术,对目标辐射源方位信息进行粒子滤波融合处理,实现了对机动目标辐射源的无源定位跟踪.仿真实验表明,该算法适用于非线性模型和非高斯噪声的目标跟踪,与传统的基于卡尔曼滤波的多传感器融合跟踪算法相比,定位跟踪更为精确,从而对提高战场电子目标定位跟踪和精确打击具有广泛的应用价值.     

不同溶剂体系中改性氢氧化镁的分散行为

研究了不同的表面改性剂对超细氢氧化镁的表面改性.并分别以水和乙醇为溶剂,研究了表面改性后氢氧化镁的分散行为.实验结果表明,以水为溶剂的体系,六偏磷酸钠分散性能最好,而以乙醇为溶剂,硅烷偶联剂KH-550分散性能最好,其用量为基体量的5%左右,可使制备的超细氢氧化镁粒径达到0.2 μm尺度以下.试验结果对进一步认识超细氢氧化镁的性质及其应用具有重要意义.     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。     

乳液聚合阶段Ⅱ动力学研究的进展

本文简述了乳浓聚合动力学研究的进展,着重于澳大利亚Sydney大学Gilbert等在乳液聚合阶段Ⅱ动力学方面的研究概况。介绍了不同水溶性单体的小尺寸种子乳液体系的SmithEwart递推方程的求解方法及其解析解形式和乳液聚合动力学数据的处理。同时讨论了该研究的局限性。     

Growth Behavior of CdS Nanoparticles Embedded in Polymer and Sol-Gel Silica Matrices: Relationship with Surface-State Related Luminescence

Chemical techniques were employed to synthesize CdS nanoparticles embedded in polymer (PEG 300) and sol-gel silica matrices. Systematic growth of particles (radius 3–9 nm) was obtained by adjusting post-deposition annealing temperature and time to examine the dependence of surface-state–related luminescence on particle size. Photoluminescence (PL) peak energy showed a linear dependence with a gentle slope in the weak confinement region and a steep slope in the strong confinement region, the divergence being observed near the excitonic Bohr radius for CdS. The empirical relation proposed for the weak confinement region could be used for estimating chemically prepared CdS nanoparticle size with a high degree of reliability from PL peak energy.     

Automatic detection and identification of shocks in Gaussian state‐space models: a Bayesian approach

An automatic monitoring and intervention algorithm that permits the supervision of very general aspects in an univariate linear Gaussian state–space model is proposed. The algorithm makes use of a model comparison and selection approach within a Bayesian framework. In addition, this algorithm incorporates the possibility of eliminating earlier interventions when subsequent evidence against them comes to light. Finally, the procedure is illustrated with two empirical examples taken from the literature. Copyright © 2005 John Wiley & Sons, Ltd.     

多层光子晶体滤波器研究

从双层结构出发研究了一种由多块不同的单周期光子晶体组合而成的多层结构的滤波器，论述了这种滤波器的工作原理，研究表明这种结构适于制作带通、窄带通过、带阻、宽带带阻、高通以及其它各种性能的滤波器。实验和理论研究的结果相一致。     

The Effect of Boundary Conditions on Gas-phase Synthesised Silver Nanoparticles

We have prepared spherical non-agglomerated silver nanoparticles by an evaporation–condensation–dilution/cooling technique. Silver was evaporated from a crucible in a tubular flow reactor. A porous tube diluter was used to quench the carrier gas at the outlet of the reactor to enhance the formation of small particles and to suppress agglomeration and other particle growth mechanisms. The number size distribution of the prepared particles was measured with a differential mobility analyser–condensation nucleus counter combination and the size and the shape of the particles were analysed with transmission electron microscope. The system was modelled using a sectional aerosol dynamics computer code to estimate the importance of different aerosol processes. In all conditions the particles obtained were non-agglomerated and spherical. The mean particle diameter varied from 4 to 10-nm depending on boundary conditions. From the modelling studies it can be concluded that the nucleation rate is the most important parameter controlling the final particle size.     

离轴球形粒子对高斯波束的散射光通量的计算

利用矢量球谐函数展开的方法,研究了离轴球形粒子对椭圆高斯波束的散射。根据其远区散射场的形式,得出了归一化散射场的斯托克斯参量(散射强度)与颗粒直径、折射率以及散射角的关系。建立了计算离轴球形粒子对高斯波束散射通量的解析模型,计算了散射光在任意散射方向上的光通量,得到了前向任意立体角内散射通量的计算公式,为激光散射探测提供了理论依据。