原子吸收光谱法测定拉伸断口铬镍钼钛钢样品中主成分

研究了毫克级铬镍钼风样品中主成分镍的火焰原子吸收光谱法（FAAS法）和铬、钼、钒、钛、铝的塞曼恒温平台石墨炉原子吸收光谱法（ZSTPF－AAS法）。采用了微波溶样技术作为防污染样品预处理技术，采用石墨管硅涂层改进技术提高了仪器的测试精度。其中铬、镍、钼、钒、钛、铝的相对标准偏差分别为2.7%,0.97%,8.6%,7.3%,1.7%,7.3%。其加标回收率分别为96.5%,97%,96.7%,93%,98%,91%。通过分析，发现在较低温度下铬镍钼钛钢断面上有轻微的钼偏析现象，可能是拉伸断裂的主要化学影响因素。     

Solid state photoreactions occurring at the interface between crystallites of two different organic compounds

This paper deals with the solid state bimolecular photoreactions occurring at the interface between crystallites of two different organic compounds prepared as a polycrystalline mixture by melting-resolidification. The photoreactions include the photoaddition of NH compounds to aromatic and olefinic double bonds, hydrogen abstraction, condensation reaction via photoelectron transfer and [2+2] photoaddition. Particular attention is focused on the characterization of the polycrystalline mixture, the selectivity of the photoreactions in the solid state compared with those in the solution phase and the factors controlling the photoreactions.     

A chiroptical molecular switch with distinct chiral and photochromic entities and its application in optical switching of a cholesteric liquid crystal

Two new structurally related photoswitches are described, in which azobenzene photochromism is combined with the chirality of a 2,2'-dihydroxy-1,1'-binaphthyl unit. In system 1 the chiral binaphthyl moiety is bridged by a methylene tether, locking the biaryl chirality while in system 2 the biaryl core is unbridged and has considerable conformational flexibility. Both compound are capable of inducing cholesteric liquid crystalline phases and proved to be good photoswitches both in solution and in a liquid crystalline matrix. Compound 2 is capable of completely reversing the liquid crystalline chirality which is unique for a chiroptical molecular switch where the switching unit and the chiral moiety are separate entities.     

石墨炉原子吸收法测定生物样品中镉的几种基体改进剂的比较

本文比较了磷酸二氢铵、氟化铵、硫酸铵、氯化钯、氯铂酸以及氯铂酸与多种有机酸的混合试剂在测定ＧＢＷ猪肝标准物质中镉时基体改进效果，其中，氯铂酸的基体改进能力最强，猪肝标准物质的回收率在９０％     

Synthesis,Liquid‐Crystalline Properties,and Supramolecular Nanostructures of Dendronized Poly(isocyanide)s and Their Precursors

A series of novel dendronized π‐conjugated poly(isocyanide)s were synthesized successfully by using a Pd? Pt μ‐ethynediyl dinuclear complex ([ClPt{P(C₂H₅)₃}₂C?CPt{P(C₂H₅)₃}₂Cl]) as the initiator. The polymerizations of the dendronized monomers follow first‐order kinetics, indicating that living polymerization takes place. The obtained polymers exhibit narrow polydispersities in the range of 1.03–1.20. Thermal properties of the poly(isocyanide)s as well as their isocyanide monomers and precursors with formamido (HCONH‐) moieties as apexes were investigated by using differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide‐angle X‐ray diffraction (WAXD). Both the peripheries and the apex groups of the dendrons affect the formation of supramolecular column and/or cubic phases of the precursors and monomers. The formamido precursor forms a liquid‐crystalline phase due to intermolecular hydrogen bonding. The isocyanide monomer lacks this hydrogen‐bonding ability and does not display an organized mesophase. All of the rigid poly(isocyanide)s with the monodendrons exhibit columnar liquid‐crystalline phases. Interestingly, cylindrical structures of a poly(isocyanide) were directly visualized by using transmission electron microscopy (TEM).     

硅的原子吸收光谱分析进展

对近十年来用原子吸收光谱法测定硅的情况进行评述．重点介绍用石墨炉测定硅时，为了避免硅与石墨炉中碳形成难熔碳化硅影响测定硅的灵敏度而使用的各种化学改进剂，涂层石墨管和一些新的实验技术．引用参考文献４２篇．     

从P-Mo(Ⅴ)杂多化合物合成多形貌Al_(13)基钼酸盐晶体

以H3PMo12O4·0nH2O、H4PMo11VO4·0nH2O和(NH4)6P2Mo18O6·2nH2O3种杂多化合物为钼源,采用直接混合后陈化的方法合成了多形貌A113基钼酸盐晶体,相应A113基钼酸盐晶体的形貌和尺寸分别是斜方三棱柱形(80μm×30μm)、星形(30μm×10μm)和叶片形(500μm×150μm)。粉末X射线衍射结果表明这3种多形貌A113基钼酸盐晶体结晶较好,在2θ为6.65°、8.00°和14.16°处都有强而尖锐的衍射峰。而以Na2MoO4·2H2O为钼源时只能制得无定形簇合物。根据ICP、FTIR和TG/DTG结果给出多形貌的Al13基钼酸盐晶体的化学简式为Na[AlO4Al12(OH)24(H2O)12][MoO4]·48H2O。初步探讨了A113基钼酸盐晶体的形成机理。     

Thermal behavior of selected ferroelectric liquid crystals

Thermal properties of three ferroelectric liquid crystals, namely: 3-octyloxy-6-[2-fluor-4-(fluoroctyloxy)phenyl]-pyridine (FFP), 3-(3-fluor-nonyl)-6[4-heptyloxyphenyl]-pyridine (FNHPh-P), 4-[(S,S)-2,3-epoxyhexyloxy]phenyl 4-(decyloxy)benzoate (EHPhDB) were studied using heat flux differential scanning calorimetry method. All the transitions expected in this compounds, except the SmC^*-SmA^* and SmC^*-S₃ transitions, were detected in the DSC curves. The temperatures of the phase transitions and the enthalpy changes associated with them were determined. The transition from the liquid crystalline to the crystalline state showed significant hysteresis for all three compounds studied. The following transitions: SmA^*-Is, SmG^*-SmC^* for FNHPh-P, N^*-Is for EHPhDB, N^*-Is and SmC^*-N^* for FFP also showed a small hysteresis basing on which first-order character of all the above transitions was implied. All three substances studied in this work are characterized by a complex polymorphism in the solid state.The author is grateful to Dr. Stanislaw Wróbel for his stimulating interest, valuable discussions and supplying the samples. This work has been done in the framework of the KBN grant 2 P302 139 07.     

石墨炉原子吸收法测定土壤中镉的测量不确定度评定

石墨炉原子吸收法测定土壤中镉的不确定度主要来源于称量样品、定容样品消解液、测定样品消解液中镉的质量浓度及测定土壤水分引入的不确定度。对各不确定度分量进行了计算,求得合成标准不确定度和扩展不确定度分别为0.0026、0.005mg/kg。镉测量不确定度的主要来源是测定样品消解液中镉质量浓度引入的不确定度。     

Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.