调制磁场清除柱形等离子体发生器中的尘埃颗粒

利用流体模型，计算了调制磁场作用下，圆柱形等离子体发生器中电子、离子及尘埃的运动情况．数值模拟结果表明，尘埃颗粒随着调制磁场频率的改变，产生两种不同的运动方式：pulse运动和除尘运动．解释了pulse运动产生的机理，并提出了柱形等离子体发生器中利用调制磁场清除尘埃颗粒的方法． 关键词： 尘埃颗粒 调制磁场     

Propagation and scattering of ultrasonic waves in polycrystals with arbitrary crystallite and macroscopic texture symmetries

A general ultrasonic attenuation model for a polycrystal with arbitrary macroscopic texture and triclinic ellipsoidal grains is described with proper accounting for the anisotropic Green’s function for the reference medium. The texture and the ellipsoidal grain frames in the model are independent and the wave propagation direction is arbitrary. The attenuation coefficients are obtained in the Born approximation accompanied by the Rayleigh and stochastic asymptotes. The scattering model displays statistical anisotropy due to two independent factors: (1) shape of the oriented grains and (2) preferred crystallographic orientation of the grains leading to macroscopic anisotropy of the homogenized reference medium. The model is applicable to most single phase polycrystalline materials that may occur as a result of thermomechanical manufacturing processes leading to different macrotextures and elongated-shaped grains. It predicts the strength of ultrasonic scattering and its dependence on frequency and propagation direction as a function of grain shape, grain crystallographic symmetry and macroscopic texture parameters and provides the texture-induced dependence of macroscopic ultrasonic velocity on propagation angle. It considers proper wave polarizations due to macroscopic anisotropy and scattering-induced transformations of waves with different polarizations. Competing effects of grain shape and texture on the attenuation are observed. In contrast to the macroscopically isotropic case, where in the stochastic regime the attenuation is highest in the direction of the longest ellipsoidal axis of the grain, the wave attenuation in the elongation direction may be suppressed or amplified by the texture with different effects on the quasilongitudinal and quasitransverse waves. The frequency behavior is also interestingly affected by texture: a hump in the total attenuation coefficient is found for the fast quasitransverse wave which is purely the result of macroscopic anisotropy and the existence of two quasitransverse waves; this hump is not observed in the macroscopically isotropic case. Striking differences of the texture effect on the directional dependences of the attenuation coefficients are found at low versus high frequencies.     

Large grained and high charge carrier lifetime CH3NH3PbI3 thin-films: implications for perovskite solar cells

Spin coated perovskite thin films are known to have an issue of pinholes & poor morphology control which lead to poor device-to-device repeatability, that is an impediment to scale-up. In this work, Methylamine vapor annealing process is demonstrated which consistently leads to high-quality perovskite thin-films with an average grain-size of 10–15 μm. The improvement in film morphology enables improvement in effective carrier recombination lifetime, from 21 μs in as-deposited films to 54 μs in vapor-annealed films. The annealed films with large-grains are also more stable in ambient conditions. Devices made on annealed perovskite films are very consistent, with a standard deviation of only 0.7%. Methylamine vapor annealing process is a promising method of depositing large-grain CH₃NH₃PbI₃ films with high recombination lifetime and the devices with improved performance.     

近红外光谱波段优化在白酒酒醅成分分析中的应用

为了提高白酒酒醅主要成分的快速检测技术水平,利用近红外光谱法对白酒酒醅中的水份、淀粉、酸度和酒精度进行定量分析,通过PLS建立酒醅成分定量分析模型,同时采用CARS、间隔偏最小二乘变量选择法(iPLS)和无信息变量消除法(UVE),实现光谱特征波段选择,并利用多元散射校正(MSC)、导数以及标准正态变量变换(SNV)等预处理方法进行模型优化。用决定系数(R2)、预测标准偏差(RMSEP)以及最佳主因子数对模型进行评价,确定最佳建模方法。结果表明：波段筛选能够对模型起到优化作用,并提高模型运算速度,其中CARS优化效果最为明显,酒醅水份、淀粉、酸度和酒精度的R2分别达到0.885,0.915,0.951,0.954;RMSEP分别为0.630,0.519,0.228,0.234,有效地提高了模型的稳定性与准确度。经过优化,所建模型预测效果好,能够满足白酒酒醅主要成分的快速检测要求,在实际应用中有一定的参考价值。     

Comments on the capture cross-section of electrons in silver bromide grains

The values in the range of 10⁻¹⁵ cm² to 10⁻¹⁴ cm² have been reported by various authors for the capture cross-section of electrons at the traps in silver bromide grains. In this paper we have given a suitable value of this cross-section which is used for computing the track characteristics in nuclear emulsions (e.g. effective ionization, probability of development, grain density and mean gap length) and the ratio of the rate constant of recombination and trapping. Theoretical results agree well with the experimental observations and the available data of other workers and give a convincing support to our choice of this cross-section parameter.     

Optical colours and polarization of a model reflection nebula

Simple models of a reflection nebula in the form of a plane-parallel slab containing smooth spherical solid particles in submicron size range have been considered. Single scattering has been assumed. The effect of varying the composition and size distribution function of the grains have been brought out in the calculations using Mie theory of scattering. The analytical part of the geometry of the problem has been treated quite rigorously and the resulting expression for nebular intensity has been presented in a somewhat new form. In this paper, the case of the star behind the nebula has been examined. A comparison of the theoretical results with the observations of the Merope nebula shows that the dirty ice grains with index of refraction about 1·3–0·1i and size parametera ₀ = 0·5μ give reasonable agreement with the colours. Simultaneously, the polarization in the visual and blue wavelength bands agree approximately up to offset angle of 6 minutes of arc. The larger offset angles pose an intriguing problem. The general trends of nebular colours and polarization with variation of real and imaginary parts of index of refraction and the size distribution parameter have been tabulated to serve as a guide for further study of reflection nebulae with the star in the rear. A part of this work was presented at the first scientific meeting of the Astronomical Society of India, held on 27 and 28 February 1974 at Hyderabad. An erratum to this article is available at .     

低轴径比CrCoAPO-5分子筛的合成与表征

通过控制合成液制备温度、晶体晶化速度等因素, 调控CrCoAPO-5分子筛颗粒的形貌及大小。合成的分子筛颗粒采用SEM、XRD、FT-IR、UV-Vis、TG、BET、ICP-OES等进行表征。结果表明低温5 ℃配制的合成液引入晶种后, 在传统水热条件下150 ℃晶化4.5 h, 可制备出直径3 μm、轴径比小于0.2的六边形片状分子筛颗粒。相对于较大颗粒的样品具有较短的扩散孔道, 更高的催化活性。     

Geoacoustic inversion based on reflection model of effective density fluid approximation

In order to obtain the physical and geoacoustic properties of marine sediments,an inverse method using reflection loss of different grazing angles is presented.The reflection loss is calculated according to the reflection model of effective density fluid approximation.A two-step hybrid optimization algorithm combining differential evolution and particle swarm optimization along with Bayesian inversion is employed in estimation of porosity,mean grain size,mass density and bulk modulus of grains.Based on the above physical parameters,geoacoustic parameters,including sound speed and attenuation,are further calculated.According to the numerical simulations,we can draw a conclusion that all the parameters can be well estimated with the exception of bulk modulus of grains.In particular,this indirect inverse method for bottom geoacoustic parameters performs high accuracy and strong robustness.The relative errors are 0.092%and 17%,respectively.Finally,measured reflection loss data of sandy sediments at the bottom of a water tank is analyzed,and the estimation value,uncertainty and correlation of each parameter are presented.The availability of this inverse method is verified through comparison between inverse results and part of measured parameters.     

Yeast Biomass Production in Brewery’s Spent Grains Hemicellulosic Hydrolyzate

Yeast single-cell protein and yeast extract, in particular, are two products which have many feed, food, pharmaceutical, and biotechnological applications. However, many of these applications are limited by their market price. Specifically, the yeast extract requirements for culture media are one of the major technical hurdles to be overcome for the development of low-cost fermentation routes for several top value chemicals in a biorefinery framework. A potential biotechnical solution is the production of yeast biomass from the hemicellulosic fraction stream. The growth of three pentose-assimilating yeast cell factories, Debaryomyces hansenii, Kluyveromyces marxianus, and Pichia stipitis was compared using non-detoxified brewery’s spent grains hemicellulosic hydrolyzate supplemented with mineral nutrients. The yeasts exhibited different specific growth rates, biomass productivities, and yields being D. hansenii as the yeast species that presented the best performance, assimilating all sugars and noteworthy consuming most of the hydrolyzate inhibitors. Under optimized conditions, D. hansenii displayed a maximum specific growth rate, biomass yield, and productivity of 0.34 h⁻¹, 0.61 g g⁻¹, and 0.56 g l⁻¹ h⁻¹, respectively. The nutritional profile of D. hansenii was thoroughly evaluated, and it compares favorably to others reported in literature. It contains considerable amounts of some essential amino acids and a high ratio of unsaturated over saturated fatty acids.     

Determination of Riboflavin in Cereal Grains by Capillary Electrophoresis with Laser-Induced Fluorescence Detection with On-Line Concentration

A very simple, sensitive, and reliable method for the routine determination of riboflavin in cereal grains by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) was established. Two on-line concentration techniques, namely, stacking in reverse migrating micelles (SRMM) and sweeping, were examined to enhance the detection signal. The optimum separation buffer consisted of 20 mM phosphoric acid and 140 mM sodium dodecyl sulfate (SDS), and a hydrodynamic injection of 30 s at 0.5 psi was confirmed for the introduction of a sample. In addition, it was found that salt in sample matrix influenced the performance of SRMM, showing the standard addition method was required for the quantitative analysis. The linearity of the method was good with a range of 0.5–500 ng/mL (r = 0.9990). The limit of detection (LOD) was 0.29 ng/mL at a signal-to-noise ratio of 3. This procedure presented was successfully applied to determine riboflavin in 18 samples of 9 types of cereal grains. The recovery rates varied from 94% to 98%, and the relative standard deviation (RSDs) was less than 4.1%.