Fully developed mixed convection in horizontal and inclined tubes with uniform heat flux using nanofluid

Fully developed laminar mixed convection of a nanofluid consists of water and Al₂O₃ in horizontal and inclined tubes has been studied numerically. Three-dimensional elliptic governing equations have been solved to investigate the flow behaviors over a wide range of the Grashof and Reynolds numbers. Comparisons with previously published experimental and numerical works on mixed convection in a horizontal and inclined tube are performed and good agreements between the results are observed. Effects of nanoparticles concentration and tube inclinations on the hydrodynamics and thermal parameters are presented and discussed. It is shown that the nanoparticles concentration does not have significant effects on the hydrodynamics parameters. Heat transfer coefficient increases by 15% at 4 Vol.% Al₂O₃. Skin friction coefficient continually increases with the tube inclination, but the heat transfer coefficient reaches a maximum at the inclination angle of 45°.     

分形介质的传热与传质分析(综述)

本文论述了分形介质的分形理论和数学基础,并简要综述了用分形理论和方法研究分形介质的传热与传质特性(如多孔介质的渗透率、热导率以及池核态沸腾换热)方面目前所取得的研究进展,最后扼要展望了用分形理论和方法进一步研究分形介质的传热与传质的可能的若干课题和方向。     

The effect of micro-morphology of Bi2O3 on catalytic properties of Co/Bi catalyst for wet air oxidation of acetic acid

The novel phase transfer catalysts S-8 [4-(dimethyloctylammonium) propansultan] and DB-X [1,4-bis(triethylmethylammonium)benzene dibromide] were synthesized and employed for high conversion synthesis of dichlorocyclopropane from various olefins.This revised version was published online in December 2005 with corrections to the Cover Date.     

从像上提取非旋转对称系统的传递函数制作解卷空间滤波器

本文提出从高分辨电子显微像中,利用光学、全息和部分相干等方法,提取传递函数,制作相位和振幅滤波器,实现解卷,提高高分辨电子显微像的分辨率.     

Calculation of Normal Vibrations of Chlorin by the Method of Density Functionals

Using the DFT/B3LYP method with a 6-31G(d) basis set, the structure, normal vibration frequencies, and the absolute band intensities in the IR spectra of the chlorin molecule and its four symmetric isotopomers have been calculated. Scaling of the force field by the Pulay method in independent and natural coordinates has been carried out. A method for obtaining effective force fields without using experimental data on the fundamental vibration frequencies is proposed. By comparing the vibration modes and constructing special matrices, complete assignment of the fundamental frequencies of porphin and chlorin has been carried out. It has been shown that the majority of porphin macroring vibrations upon pyrrolenine ring hydrogenation are frequency-characteristic and only 12 vibrations change considerably. A frequency correlation with regard for the mode transition between chlorin and all its isotopomers under consideration has been established. Comparative analysis of the force fields of porphin and chlorin in dependent natural coordinates has revealed the unique nonlocal character of the change in force constants of the macroring upon hydrogenation of one pyrrolenine ring. Modeling of the IR spectra of chlorin and its isotopomers has been performed. Assignment and interpretation of the normal vibrations of the molecules under consideration have been carried out.     

The method of lines solution of discrete ordinates method for radiative heat transfer in cylindrical enclosures

A radiation code based on method of lines solution of discrete ordinates method for radiative heat transfer in axisymmetric cylindrical enclosures containing absorbing-emitting medium was developed and tested for predictive accuracy by applying it to (i) test problems with black and grey walls (ii) a gas turbine combustor simulator enclosing a non-homogeneous absorbing-emitting medium and benchmarking its steady-state predictions against exact solutions and measurements. Comparisons show that it provides accurate solutions for radiative heat fluxes and can be used with confidence in conjunction with CFD codes based on the same approach.     

Living/controlled radical copolymerization of N‐substituted maleimides with styrene in 1‐butyl‐3‐methylimidazolium hexafluorophosphate and anisole

The atom transfer radical copolymerization of N‐substituted maleimides such as N‐phenylmaleimide (PhMI), N‐cyclohexylmaleimide (ChMI), and N‐butylmaleimide (NBMI) with styrene initiated with dendritic polyarylether 2‐bromoisobutyrates in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), at room temperature and anisole at 110 °C was investigated. The dendritic‐linear block copolymers obtained in ionic liquid possessed well‐defined molecular weight and low polydispersity (1.05 < M_w/M_n < 1.32) and could be used as a macroinitiator for chain‐extension polymerization, suggesting the living nature of the reaction system. The ionic liquids containing catalyst could be recycled in the atom transfer radical polymerization systems without further treatment. Compared with polymerization conducted in anisole, the polymerization in ionic liquid had a stronger tendency for alternation. The tendency for alternation decreased in the order PhMI > NBMI > ChMI in [bmim][PF₆] and PhMI > ChMI > NBMI in anisole. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2156–2165, 2003     

Quinone imine dye formation via photocycloaddition between isocyanates and chloranil

Photochemical [2+2]cycloaddition between electron-donating aryl isocyanates and chloranil was observed in acetonitrile or benzene, and the following elimination of carbon dioxide resulted in the formation of the corresponding quinone imine dyes. This new route for synthesis of quinone imine was investigated by product analyses, laser flash photolyses, and molecular orbital calculation.     

The synthesis of azo compounds from nitro compounds using lead and triethylammonium formate

Aromatic nitro compounds were reduced to the corresponding symmetrically substituted azo compounds using lead as catalyst and triethylammonium formate as hydrogen donor. Various azo compounds containing additional reducible substituents including halogens, nitrile, acid, phenol, ester, methoxy functions, etc, have been synthesized in a single step by the use of this reagent. The conversion is reasonably fast, clean, high yielding and occurs at room temperature in methanol.     

In-Situ Intrinsic Interface Strength Measurement at Elevated Temperatures and its Relationship to Interfacial Structure

A previously developed laser spallation technique has been modified to measure the tensile strength of thin film interfaces in-situ at temperatures up to 1100°C. Tensile strengths of Nb/A-plane sapphire, FeCrAl/A-plane sapphire and FeCrAlY/A-plane sapphire were measured up to 950°C. The measured strengths at high temperatures were substantially lower compared with their corresponding strengths at ambient temperature. For example, at 850°C, the interface tensile strength for the Nb/sapphire (151 ± 17 MPa), FeCrAl/sapphire (62 ± 8 MPa) and FeCrAlY/sapphire (82 ± 11 MPa) interface systems were lower by factors of approximately, 3, 5, and 8, respectively, over their corresponding ambient values. These results underscore the importance of using such in-situ measured values under operating conditions as the failure criterion in any life prediction or reliability models of such coated systems where local interface temperature excursions are expected. The results on alloy film interfaces also demonstrate that the presence of Y increases the strength of FeCrAl/Al₂O₃ interfaces.