Electrode Modified with Langmuir–Blodgett (LB) Film of Calixarenes for Preconcentration and Stripping Analysis of Hg(II)

A new type of current sensor, Langmuir–Blodgett (LB) film of calixarene on the surface of glassy carbon electrode (GCE) was prepared for determination of mercury by anodic stripping voltammetry (ASV). An anodic stripping peak was obtained at 0.15 V (vs. SCE) by scanning the potential from ?0.6 to +0.6 V. Compared with a bare GCE, the LB film coated electrode greatly improves the sensitivity of measuring mercury ion. The fabricated electrode in a 0.1 M H₂SO₄+0.01 M HCl solution shows a linear voltammetric response in the range of 0.07–40 μg L^?1 and detection limit of 0.04 μg L^?1 (ca. 2×10^?10 M). The high sensitivity, selectivity, and stability of this LB film modified electrode demonstrates its practical application for a simple, rapid and economical determination of Hg²⁺ in a water sample.     

A Self‐Sampling‐and‐Flow Biosensor for Continuous Monitoring

A self‐sampling‐and‐flow biosensor was fabricated by sandwiching a nitrocellulose strip on the working electrode side of the double‐sided microporous gold electrodes and a wicking pad on the counter electrode side. The double‐sided microporous electrodes were formed by plasma sputtering of gold on a porous nylon substrate. Sample was taken up to the enzyme‐immobilized working electrode by the capillary action of the front nitrocellulose strip dipped into the sample solution, analyzed electrochemically at the enzyme‐immobilized electrode, and diffuses out to the backside wicking pad through the micropores of the electrodes, constituting a complete flow cell device with no mechanical liquid‐transporting device. Biosensor was formed by co‐immobilizing the glucose oxidase and electron transfer mediator (ferrocene acetic acid) on the thioctic acid self‐assembled monolayer‐modified working electrode. A typical response time of the biosensor was about 5 min with the sensitivity of 2.98 nA/mM glucose, providing linear response up to 22.5 mM. To demonstrate the use of self‐sampling‐and‐flow biosensor, the consumption rate of glucose in the presence of yeast was monitored for five days.     

Kinetic-potentiometric assay of formaldehyde in pharmaceutical and industrial samples, monitored by copper solid ion selective electrode, after its reaction with the copper(II)-bis-(ethylenediamine) complex

A kinetic-potentiometric method is described for the quantitative assay of formaldehyde (HCHO) in pharmaceutical and industrial preparations. It is based on the reaction of HCHO with (ethylenediamine)-Cu(II)-sulfate [Cu(CH₂NH₂)₂(H₂O)₂] · SO₄. The changes in potential, resulting from the release of the Cu(II) cations, are monitored with a Cu(II)-ion selective electrode. The calibration curve for the HCHO is linear in the concentration range 50–250 mg L⁻¹, with a limit of detection of 8.5 mg L⁻¹. The method shows very good reproducibility with an RSD of 2.6% for successive injections (n = 5) of 150 mg L⁻¹ HCHO primary solution, while it is interference free. The method was successfully tested in various industrial and pharmaceutical preparations.     

Phenomenological aspects related to the electrochemical behaviour of smooth palladium electrodes in alkaline solutions

The voltammetric behaviour of smooth palladium electrodes in 1 M NaOH is studied in the potential range related to the thermodynamic stability of water. The electrosorption of H atoms on bulk Pd appears as a reversible reaction coupled to a diffusion process which occurs within bulk Pd. The voltammetric electrodesorption of H from bulk Pd is a process under mixed control, i.e. the diffusion from the bulk and the surface oxidation of H atoms. Fast pseudocapacitive reactions are detected in the range 0.2–0.4 V associated with the adsorption of H atoms at the submonolayer level. The initial stages of Pd oxide layer formation, at ca. 0.68 V, involves two reversible stages. The Pd oxide monolayer formation is achieved at 1.25 V/RHE and is followed by the formation of a third reversible system. This system is enhanced by an excursion in the potential range of the oxygen evolution reaction. This reversible system is probably a redox system involving Pd(II)/Pd(IV) species. The voltammetric electroreduction of the Pd oxide film shows rather irreversible behaviour. Inhibition effects on the reversible adsorption of H atoms due to residual oxide species were observed as well as inhibition on loading the Pd electrode with hydrogen to form the (α + β)-PdH phase. Rotating ring-disc experiments demonstrate that Pd electrodissolution in basic solutions is much smaller than in acid solutions. However, soluble palladium species are detected, especially during the formation of the fast redox systems, in the potential range related to Pd oxide layer growth.     

掺硼多晶金刚石膜的电化学性能研究

采用EACVD(Electron Assisted Chemical Vapor Deposition)方法制备了掺硼金刚石膜, 并用扫描电镜、拉曼光谱及霍尔效应等测试方法对其表面形貌、生长特性、载流子浓度以及导电性能进行了分析. 测试结果表明, 掺硼金刚石膜是由微米级晶粒组成的多晶膜, 其载流子浓度为4.88×1020 cm-3, 电阻率为0.03 Ω·cm, 是高品质金刚石膜. 用该金刚石膜制作电化学电极, 利用循环伏安法分别测量了金刚石膜电极在氯化钾空白底液、亚铁氰化钾溶液和左旋半胱氨酸溶液中的循环伏安曲线, 发现该金刚石膜电极在水溶液中具有宽的电化学窗口(约为3.7 V)和接近零的背景电流, 在生物制剂的检测中具有很高的灵敏度和良好的稳定性, 是一种理想的电化学电极材料.     

Electrochemistry of vanadium-doped tetragonal and monoclinic ZrO2 attached to graphite/polyester composite electrodes

The electrochemistry of monoclinic and tetragonal vanadium-doped zirconias (VZrO₂), prepared from gel precursors with vanadium loadings ranging from 0.5 to 15 mol%, has been studied using abrasive-conditioned graphite/polyester composite electrodes immersed in aqueous HCl and HClO₄ solutions. Isolated vanadium centers form a solid solution in the zirconia lattice with a solubility limit close to 5 mol%. Above 5 mol%, finely dispersed V₂O₅ is formed. Vanadium centers located at the boundary sites of the zirconia lattice display successive one-electron transfer processes near to +0.25 and +0.10 V vs. SCE, whereas finely dispersed V₂O₅ yields three successive reduction processes at +0.46, +0.30, and +0.16 V vs. SCE. Electrochemical data indicate the presence of both V⁵⁺ and V⁴⁺ centers in the lattice of monoclinic and tetragonal zirconias, the V⁵⁺/V⁴⁺ ratio decreasing as the vanadium loading increases. Electronic Publication     

A New Neutral Carrier for Silver Ions Based on a Bis(Thiothiazole) Derivative and its Evaluation in Membrane Electrodes

Membrane electrodes based on 2,2-dithiobis(benzothiazole), DTBBT, as a neutral carrier for silver ions are described. Silver-selective membrane electrodes formulated with 2wt% DTBBT ionophore and 50mol% TFPB in an FPNPE plasticized poly (vinyl chloride) exhibited near-Nernstian responses towards silver ions (60.3±0.5mVdecade^–1) over a wide silver ion activity range of 0.83µM to 94mM. Increasing the amount of anionic sites, TFPB, to 100 or 150mol% (relative to the DTBBT weight) resulted in super-Nernstian responses toward silver ions. Membrane electrodes prepared using a low dielectric constant plasticizer, however, exhibited sub-Nernstian responses. Polymer membrane electrodes with optimal composition (i.e., 2wt% DTBBT, 50mol% TFPB in FPNPE plasticized poly(vinyl chloride)) exhibited high potentiometric selectivity towards silver ions over alkali, alkaline earth, transition metal ions, as well as heavy metal ions such as Hg²⁺ and Pb²⁺. A good correlation was found between the potentiometric selectivity coefficients and the change in the UV-visible spectra of the ionophore upon exposure to different metal ions. The overall performance of the silver-selective membrane electrodes based on DTBBT ionophore, which is available at low cost, was found to be comparable to the performance of silver electrodes prepared with Fluka silver ionophore-IV. A DTBBT-based silver electrode was used as an indicator electrode for titrations of silver ions using standard sodium chloride solutions. Sharp inflections occur at the end point, and the data obtained showed 99.4% recovery with a standard deviation of 0.7% (n=3). In addition, the applicability of the DTBBT-based silver-selective electrode is illustrated by measuring the silver concentrations in natural water spiked with silver nitrate and by analyzing the silver in electroplating wastewater samples. The results obtained utilizing a DTBBT-based silver electrode showed very good agreement with the standard methods of analysis.     

Al Electrode Modified by Au Atoms as a Novel Electrode for Electrocatalytic Oxidation of Thiosulfate

An aluminum electrode modified with gold atoms was introduced as a novel electrode. Gold atoms were deposited both chemically and electrochemically onto the aluminum electrode to make an aluminum/gold (Al/Au) modified electrode (ME). The experimental results showed that the Al/Au modified electrode prepared by chemical deposition, exhibits much more current than the electrochemical deposition method. The electrochemical behavior of the Al/Au modified electrode was studied by cyclic voltammometry. This modified electrode showed two pairs of peaks, a₁c₁ and a₂c₂, with surface‐confined characteristics in a 0.5 M phosphate buffer. The dependence of E_pa of the second peak (a₂c₂) on pH shows a Nernestian behavior with a slope of 55 mV per unit pH. The effect of different supporting electrolytes, solution's pH and different scan rates on electrochemical behavior of Al/Au modified electrode was studied. Au deposited electrochemically on a Pt electrode (Pt/Au) was also used as another modified electrode. A comparative study of electrochemical behavior of bare Al, Pt/Au and Al/Au modified electrodes showed that both Pt/Au and Al/Au electrodes have the ability of electrocatalytic oxidation of S₂O₃^2?, but the electrocatalytic oxidation on the latter was better than the former. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry and chronoamperometry techniques. The average value of the rate constant for the catalytic reaction and the diffusion coefficient were evaluated by means of chronoamperometry technique.     

以单环有机锡配合物为载体的水杨酸根阴离子选择电极的研究

Two new cyclic pentacoordinative organotin(Ⅳ) complexes, 2,4-dihydroxyacetophenone tribenzyltin(HAPTBT) and 2,4-dihydroxyacetophenone triphenyltin(HAPTPT) were synthesized and used as anion ionophore for PVC membrane electrode. The new electrodes exhibit specificity selectivity for salicylate. The electrode based on HAPTBT as a neutral carrier displays a highly potentiometric response to salicylate and an anti-Hofmeister selectivity sequence in the following order: Sal^- ＞ SCN^- ＞ I^- ＞ NO₂^- ＞ Br^- ＞ Cl^- ＞ ClO₄^- ＞ NO₃^- ＞ SO₄^2-. The electrode has the advantages of fast response, stability and reproducibility, simplicity. The response mechanism is discussed in view of UV spectroscopy technique. The results show that there are close relationship between the potentiometric response characteristics and structure of organotin(Ⅳ) complexes. The electrode was applied to medicine analysis with satisfactory results.     

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.