Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

On existence and regularity of solutions for 2‐D micropolar fluid equations with periodic boundary conditions

In this paper, we prove the existence and uniqueness of a global solution for 2‐D micropolar fluid equation with periodic boundary conditions. Then we restrict ourselves to the autonomous case and show the existence of a global attractor. Copyright © 2006 John Wiley & Sons, Ltd.     

Polarization modification of PZT thin films by means of electric fields and stress in scanning force microscopy

Polarization switching in scanning force microscopy (SFM) is influenced by both electric fields and stress, whereby the latter can arise inherently from Maxwell stress. We discuss the influence of electric charges and of the polarization asymmetry on the switching behaviour. For single crystallites of PZT(53/47) thin films, the sectors for ferroelectric, ferroelastoelectric and ferroelastic switching are represented in a field-stress map. The influence of stress on the second harmonic of the SFM is also discussed.     

磁流体密封泄放压与外磁场变化关系的研究

根据实验室研制的磁流体密封装置，采用自制煤油基磁流体，通过多次实验初步探索到磁体泄放压与外磁场之间的变化规律。     

Homogenization of two-phase flow: high contrast of phase permeabilityHomogénéisation d'écoulement diphasique : grand contraste de perméabilité d'une phase

The steady-state two-phase flow non-linear equation is considered in the case when one of phases has low effective permeability in some periodic set, while on the complementary set it is high; the second phase has no contrast of permeabilities in different zones. A homogenization procedure gives the homogenized model with macroscopic effective permeability of the second phase depending on the gradient and on the second order derivatives of the macroscopic pressure of the first phase. This effect cannot be obtained by classical (one small parameter) homogenization. To cite this article: G.P. Panasenko, G. Virnovsky, C. R. Mecanique 331 (2003).     

Effect of Deborah number and phase difference on peristaltic transport of a third-order fluid in an asymmetric channel

The effect of a third-order fluid on the peristaltic transport in an asymmetric channel is studied. The wavelength of the peristaltic waves is assumed to be large compared to the varying channel width, whereas the wave amplitudes need not be small compared to the varying channel width. The channel asymmetry is produced by choosing the peristaltic wave train on the walls to have different amplitudes and phase. The flow is investigated in a wave frame of reference moving with velocity of the wave. The effects of Deborah number, phase difference, varying channel width and wave amplitudes on the pumping characteristics, streamline pattern and trapping phenomena are investigated. It is observed that the trapping regions increase as the channel becomes more and more symmetric and the trapped bolus volume decreases for increasing Deborah number, phase difference and varying channel width whereas it increases for increasing flow rate and wave amplitudes. Furthermore, the obtained results could also have applications to a range of peristaltic flows for a variety of non-Newtonian fluids such as aqueous solutions of high-molecular weight polyethylene oxide and polyacrylamide.     

Heat transfer in lattice BGK modeled fluid

The thermal lattice BGK model is a recently suggested numerical tool aiming at solving problems of thermohydrodynamics. The quality of the lattice BGK simulation is checked in this paper by calculating temperature profiles in the Couette flow under different Eckert and Mach numbers. A revised lower order model is proposed to improve the accuracy and the higher order model is proved to be advantageous in this respect, especially in the flow regime with a higher Mach number.     

A simple formula for mean multiplexing delay for independent regenerative sources

Simple expressions are given for the mean delay, mean waiting time, and mean busy period length in a multiplexer. Data streams with active periods having a general distribution are permitted, and the data rate during the active periods can be random. Data can also arrive in batches. The key restrictions of the model are that the sources are independent, idle periods are exponentially distributed, and a source generates at least enough data during an active period to keep the server busy throughout the period. The exact formulas allow evaluation of the error in approximations such as a heavy traffic diffusion approximation.Both continuous and discrete time models are considered. The discrete-time model includes that studied by Viterbi and subsequently generalized by Neuts. The Pollaczek-Khinchine formula for the mean amount of work in anM/GI/1 queue is retrieved as a limiting case.Preliminary version presented at IEEE INFOCOM, San Francisco, April 1993.