Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …     

Application of thermomagnetometry to corrosion studies of archaeological iron

Summary Thermomagnetometry has been applied to mineralized archaeological iron samples and samples from accelerated corrosion tests. It has successfully quantified the degree of corrosion, measured by the loss of iron, as well as the amount of magnetite formed and water held in the corrosion and adhered soil layers. Thermomagnetometry, thermogravimetric analysis and differential scanning calorimetry have been applied to the reported corrosion products from archaeological iron. Fourier transform infra-red and Raman spectroscopies and X-ray diffraction analyses were undertaken on the residues and at intermediate heating stages, where the thermal analyses indicated, to identify the reaction products.     

稀土对38CrMoAl钢软氮化层抗冲蚀磨损性能的影响

研究了稀土元素对38CrMoAl钢软氮化层抗冲蚀磨损性能的影响. 结果表明: 与软氮化相比, 稀土软氮化提高了38CrMoAl钢的抗冲蚀磨损性能, 同时提高了软氮化层的硬度以及钢的冲击韧度. 由于软氮化时稀土的渗入, 改善了渗层组织, 从而提高了38CrMoAl钢的抗冲蚀磨损性能和机械性能. 扫描电子显微镜对冲蚀磨损试样表面形貌的观察发现, 普通软氮化层的磨损特征为塑性变形形成的犁沟剥落, 并伴随着萌生横向裂纹, 有大块磨屑剥落; 而稀土软氮化层则为塑性变形形成的犁沟剥落.     

一类新型杂环聚芳酰胺的合成与性能研究

采用二氮杂萘类双酚 4 (4 羟基苯基 ) 2 ,3 二氮杂萘 1 酮 (DHPZ)与对氯苯腈反应制得二腈化合物 ,进一步水解为二酸 .以此新型二酸与不同二胺聚合制得的聚芳酰胺均具有较高的耐热性能 ,其Tg 在 2 91～318℃ ,且易溶于极性非质子溶剂中 .聚合物的特性粘数为 1 17～ 1 5 0dL g(2 5℃ ,0 5 %inNMP) ,对所得聚酰胺进行性能研究 ,其拉伸强度为 71～ 86MPa ,断裂伸长率为 8%～ 13% ,拉伸模量为 0 86～ 1 0 2GPa ,电阻系数数量级为 10 1 4～ 10     

Adsorptive passivation of iron by organic acid anions

Studies on the iron passivation by organic acid anions in aqueous solutions are briefly reviewed. It is shown that the passivation can be caused only by their adsorption, retarding both the iron dissolution and the formation of oxide films. Earlier, it had been believed that oxide films play a dominant role in the iron passivation in neutral solutions. The recent viewpoint is that such nonoxide iron passivation can occur in solutions of salts of not only aromatic amino acids (sodium phenylantranilate and its substitutes), but other carboxylic acids as well. An important role of chemisorption and hydrophobic properties of anions for the formation of adsorption passive films is emphasized. New possibilities for inhibitor protection of iron against corrosion, which is based on adsorptive passivation, are pointed out.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1503–1507.Original Russian Text Copyright © 2004 by Kuznetsov.     

Scratch and Abrasion Resistant Coatings on Plastic Lenses—State of the Art,Current Developments and Perspectives

The manufacturing of ophthalmic lenses is one of the most important markets worldwide and, therefore, strong research efforts are undertaken to continuously improve the quality of the products, either silicate glasses or organic polymer lenses. Hybrid sol-gel based materials play a major role in this highly competitive field and have contributed significantly to the commercial success of the organic base materials. Recent developments concern fast curing and patternable coatings that might soon become part of this business. The compatibility of hybrid sol-gel materials either with organic dyes or with inorganic vacuum borne coatings offers further possibilities to develop highly sophisticated lenses meeting not only customer needs like perfect corrective function, high optical quality and protection, but also high durability as well as cosmetic and decorative aspects. An overview and a few recent developments are outlined below.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

La0.7-xDyxSr0.3MnO3(0.00≤x≤0.70)的TCR研究

研究了La位Dy掺杂对La0.7-xDyxSr0.3MnO3(0.00≤x≤0.70)电阻温度系数(TCR)的影响.实验结果表明:Dy掺杂将引起电阻率曲线的急剧变化,导致出现大的TCR;随Dy掺杂的增加,TCR在x=0.30出现峰值,然后随掺杂量的增加逐步降低.体系出现大的TCR,来源于Dy掺杂引起的晶格畸变和额外磁性耦合.     

Cu-P系稀土耐候钢中最佳稀土含量的研究

利用光学显微镜、图像分析仪和电子探针对低氧低硫的10PCuRE耐候钢板坯进行了观察和检测,采用干-湿周浸室内加速试验方法测得了试验钢的腐蚀率.用电化学方法测得了带锈样的阳极极化曲线.研究得出对于S:～0.004%,O:～0.002%的10PCuRE耐候钢,最佳稀土含量为0.0065%～0.012%,此稀土含量对非金属夹杂物的变质作用和耐蚀性能的提高最为有利.