挖坑机钻头主轴纵向振动系统模型的建立与控制

首先利用弹性杆理论和H am ilton变分原理建立了挖坑机钻头主轴及钻尖在工作过程中由于外激励的作用使钻尖与土壤互相作用而产生纵向振动的动力学模型,同时给出边界条件和初始条件.其次通过把系统外激励函数当作控制变量,利用Banach空间几何性质证明了此系统存在唯一最优控制元.     

用线性插值法求单摆运动周期的近似解

利用线性插值的方法,提出了一个任意摆角条件下的单摆运动周期的近似公式.并利用Mathematica软件将该公式与精确解进行了比较,还与其他近似公式进行了对比.结果表明,该公式的近似程度相当好.     

Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.     

Existence of a solution for a Signorini contact problem for Maxwell-Norton materials

The aim of this article is to study the quasistatic evolutionof a Maxwell–Norton three-dimensional viscoelastic solidwith contact constraints. After introducing the appropiate functionalframework, we will discretize the problem in time using an implicitscheme whose resultant variational inequality is well posed.By using monotonicity arguments together with compensated compactnesstechniques, we will prove that the corresponding discrete solutionconverges to a solution of the continuous problem.     

Adhesion studies of latex film surfaces on the meso- and nanoscale

In this paper the effects of surface roughness and annealing temperature (T) of latex coating films on adhesion are discussed for the different stages of the film formation process. The surface free energy of latex films was assessed in terms of practical work of adhesion (W) (or adherence) using a custom-built adhesion-testing device (ATD), atomic force microscopy (AFM), and contact angle measurements. For preannealed latex films surface roughness averages (R_a) were determined from AFM height images and were related to the values of W obtained from ATD measurements at room temperature. The results obtained using these tests exhibiting surface behavior on different length scales indicate a dependence of the measured adhesion on surface roughness and temperature, as well as on the length scale of the measurements.First preannealed samples were studied, which were obtained by heat treatment above the respective glass transition temperatures (T_g). Increasing the temperature of preannealing resulted in a decrease of the adherence observed in ATD experiments at room temperature. However, on the nanoscale, using AFM, no significant variation of the adherence was observed. This observation can be explained by roughness arguments. Preannealing decreases roughness which results in lower adherence values measured by ATD while for essentially single asperity AFM experiments roughness has an insignificant effect. Specimens were also annealed over a constant period of time (90 min) at different temperatures. At the end of the heat treatment, adhesion was measured at the treatment temperature by ATD. The amplified effect of temperature observed in this case on adherence is attributed to the combination of roughness decrease and increasing test temperature. In a third set of experiments completely annealed samples were studied by ATD as well as by AFM as a function of temperature. With increasing T values ATD showed a decrease in adherence, which is attributed to a decreasing surface free energy of the annealed films at elevated T values. AFM, on the other hand, showed an opposite trend which is assigned to increasing penetration of the tip into the tip/wetting polymer samples versus increasing temperature. Finally, annealing isotherms as a function of time were investigated by ATD in situ at different temperatures. This last set of experiments allowed us to optimize annealing time and temperature to achieve complete curing.     

低温固体界面间接触导热“hysteresis”现象的研究

文中以强化低温固体界面间的接触导热为出发点 ,实验测定了低温环境下两种金属界面在过度加载前后的接触热导值 ,指出过度加载是一种经济有效的强化导热方法 ,对卸载过程接触热导率大于同次加载过程接触热导的“hysteresis”现象产生机理进行了分析     

利用驻波实验研究混沌现象

利用驻波实验演示了混沌现象,并对其进行了理论分析和计算机仿真研究.仿真结果与实验结果都表明:当连接点接近驻波波节处时,振动系统处于混沌运动状态;而当连接点接近驻波波腹处时,系统处于稳定驻波运动状态.     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

The Newton filtration and d-determination of bifurcation problems related to C~0 contact equivalence

In this paper, from the Newton filtration's point of view, we construct the singular Riemannian metric and use the method in singular theory to study the bifurcation problems, and give the sufficient condition of d-determination of bifurcation problems with respect to C0 contact equivalence. The special cases of the main result in this paper are the results of Sun Weizhi and Zou Jiancheng.