Ar原子电离能谱和Ar3p电子动量谱研究

电子动量谱学（ElectronMomentumSPectroscoP则是近．二十年来发展起来的一种新兴的探测原子、分子和固体结构的手段，它不仅能够获得轨道结合能的信息，而且能够能壳分辨地得到轨道电子的动量分布（即动量表象中的波函数模方）；同时它还是研究电子关联的最有效的实验手段．其     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Asymptotic stability of the Degasperis–Procesi antipeakon–peakon profile

The aim of this paper is to prove that the Degasperis–Procesi antipeakon–peakon profile is asymptotically stable for all time. We start by proving the asymptotic stability of a single Degasperis–Procesi peakon and antipeakon with respect to perturbations having a momentum density that is first negative and then positive. Then this result is extended towards a well-ordered trains of antipeakons–peakons under such perturbations. In particular, the asymptotic stability of the antipeakon–peakon profile holds.     

Preparation and Characterisation of Meloxicam Hydroxy Propyl <Emphasis Type="Italic">β</Emphasis>-Cyclodextrin Inclusion Complex

Meloxicam is a non steroidal anti inflammatory drug, used in the treatment of rheumatoid and osteoarthiritis. It is practically insoluble in water and its prolonged use is associated with the incidence of side effects like gastro intestinal perforations, ulcerations and bleeding. Therefore, an attempt has been made to improve the aqueous solubility of the drug by making an inclusion complex using hydroxy propyl β cyclodextrin(HPβ-CD). The complexes were prepared by physical mixture and freeze drying method. The different methods employed for evaluation such as DSC, XRD, SEM and FT-IR studies indicated complete formation of the complex by freeze drying method in a molar ratio of 1:2. The prepared complexes showed improved in-vitro dissolution profile as compared to the pure drug.     

Glow discharge mass spectrometry

Over the past twenty years or so, glow discharge mass spectrometry (GDMS) has become the industry standard for the analysis of trace elements in metals and semiconductors. A review of its history is followed by a picture of the present situation and a look to where the future may lie. Applications are summarised, including the ability of GDMS to offer depth-resolved data and non-conductor analysis, and the well-documented quantitative nature of the results is reviewed. The effects resulting from the physical properties of the analyte material are discussed at length. Finally, recent work such as fast flow sources and pulsed glow discharges is reviewed.     

Error surface calculations on the parameters defining oxygen depth profile models fitted to ARXPS data obtained from polystyrene exposed to an oxygen/helium plasma

Error surfaces are calculated for the fitting of concentration–depth profiles to angle‐resolved x‐ray photoelectron spectroscopy (ARXPS) data. The shapes of the error surfaces indicate that model parameters related to composition (especially at the very surface of the sample) are well constrained by the data, whereas parameters related to depth have a less significant impact on the fit. It is then shown that certain parameters in the different depth profile models employed are highly correlated and that the different models convey essentially the same information in different ways. Finally, a compromise profile definition is proposed for the fitting of constrained but flexible depth profiles to ARXPS data. Copyright © 2003 John Wiley & Sons, Ltd.     

The inclusion complex of piromidic acid with dimethyl-β-cyclodextrin in aqueous solution and in the solid state

Inclusion complex formation of piromidic acid (PA) with dimethyl--cyclodextrin (DM--CD) in aqueous solution and in the solid state was confirmed by the solubility method, differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The apparent stability constant,K _c , of the complex was estimated to be 244 M^–1. The stoichiometry of the complex was given as the ratio 1:2 of PA to DM--CD. The dissolution rate of the PA/DM--CD complex was much greater than that of intact PA.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

10°锥角台锥型液相色谱柱尺寸等比例放大和柱内谱带流型的可视化研究

摘要利用改进的可视化装置, 研究了10°锥角的台锥型液相色谱柱内的谱带流型与柱参数变化的关系. 将有机玻璃柱管加工成内圆台外方型的一体结构, 选择折射率一致的色谱固定相硅胶和流动相环己烷, 使整个色谱柱成为高度清晰的透明体, 能直接观察柱中彩色样品谱带的动态三维流型. 研究结果表明, 在实验条件范围内, 流动相流速对谱带流型无影响, 填料的形状和性质对塞子状流型有一定程度的影响. 比较了柱长为5cm和等比例放大后柱长为10cm锥型柱内的流型, 发现放大后的锥型柱内仍然保持塞子状流型, 总柱效等比例增加. 表明继续按比例放大成为工业规模色谱柱后仍能保持塞子状流型.     

Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 1. Effect of main chain and pendant methyl groups

Polyatomic primary ions have been applied recently to the depth profiling of organic materials by secondary ion mass spectrometry (SIMS). Polyatomic primary ions offer low penetration depth and high damage removal rates in some polymers, but the relationship between polymer chemistry and degradation under polyatomic primary ion bombardment has not been studied systematically. In this study, positive and negative ion time‐of‐flight SIMS (ToF‐SIMS) was used to measure the damage of ～100 nm thick spin‐cast poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA) and poly(methacrylic acid) (PMAA), films under extended (～2 × 10¹⁴ ions cm^?2) 5 keV SF₅⁺ bombardment. These polymers were compared to determine the effect of the main chain and pendant methyl groups on their degradation under SF₅⁺ bombardment. The sputter rate of PMMA was approximately twice that of PMA or PMAA and the rate of damage accumulation was higher for PMA and PMAA than PMMA, suggesting that the main chain and pendant methyl groups played an important role in the degradation of these polymers under SF₅⁺ bombardment. These results are consistent with the literature on the thermal and radiation‐induced degradation of these polymers, which show that removal of the main chain or pendant methyl groups reduces the rate of depolymerization and increases the rate of intra‐ or intermolecular cross‐linking. Copyright © 2004 John Wiley & Sons, Ltd.