Efficiency of composite vs. conically shaped chromatographic columns

The theory of composite chromatographic columns has been re-examined and general equations relating their efficiency to those of individual columns were derived. The derivations were based on elementary principles without reference to the principle of variance additivity. Derived also, were general equations for the efficiency of columns with continuously varying diameters, HETP and other properties from which formulae for special cases of practical interest were deduced. An example comparing the efficiencies of two columns, one conical and the other composite was given. The calculations show clearly that the conical column is superior in efficiency for the same total length and total retention volume.     

Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.     

Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

Metallocene-mediated synthesis of chain-end functionalized polypropylene and application in PP/clay nanocomposites

This paper summarizes our research in the preparation of chain end functionalized isotactic polypropylene (PP) having a terminal functional group, such as Cl, OH, and NH₂. The chemistry involves metallocene-mediated propylene polymerization using rac-Me₂Si[2-Me-4-Ph(Ind)]₂ZrCl₂/MAO complex in the presence of styrene derivatives (St-f) and hydrogen, which serve as the chain transfer agents. The molecular weight of the resulting PP polymers with a terminal Cl, OH and NH₂ group (i.e., PP-t-Cl, PP-t-OH and PP-t-NH₂) are inversely proportional to the molar ratio of [St-f]/[propylene]. Despite the extremely low concentration of functional group, the high molecular weight chain end functionalized PP-t-OH and exhibit a distinctive advantage over other functional PP polymers containing side chain functional groups or long functional blocks. The terminal hydrophilic OH and cations, with good mobility and reactivity, effectively hydrogen bond and ion-exchange the cations (Li⁺, Na⁺, etc.) located between the clay interlayers, respectively. Such interactions anchor the PP chain to the clay surfaces. On the other hand, the remaining rest of the unperturbed end-tethered high molecular weight PP tail exfoliates the clay layers. This exfoliated structure is maintained even after further mixing of the PP-bearing platelets with pure neat PP polymers.     

掺铬铝酸钇红色颜料的合成、结构和性能表征

研究了高温固相合成制备掺铬铝酸钇红色颜料的方法，着重考察了灼烧温度（1000-1400℃）、灼烧时间（1-2h）、主要原料配比（Al／Y：1：0．5—1：1．5，Cr2O3％：0．3％-5％）等实验条件对产物结构和色泽的影响。XRD等方法对样品进行的相态分析表明，主相为铝酸钇石榴石相；运用反射光谱对红色颜料的色泽进行了反射峰位和相关强度的表征。当Y2O3：Al2O3摩尔比为1：1，掺杂3％的Cr2O3作显色剂，在少量矿化剂存在时，在1300℃下灼烧1 h，得到了色坐标为x=0．577，Y=0．401的红色陶瓷颜料。     

缩聚合成聚芳酯和聚酯－聚醚弹性体的微相复合物

通过原位直接缩聚反应，制备了刚性棒状聚对羟基苯甲酸酯（ＰＨＢ）和聚对苯二甲酸丁二醇酯－聚四亚甲基醚多嵌段共聚物（ＰＢＴ－ＰＴＭＧ）的微相复合物．复合物可溶于氯仿等溶剂，可以浇铸成膜．本文研究了ＰＨＢ含量和聚合过程中，基体聚合物溶液浓度对微相复合物形态以及力学性能影响．同共混法相比，原位缩聚法可得到分散更均匀，力学性能更优良的微相复合物．     

Heat transfer in polymer composites filled with inorganic hollow micro-spheres: A theoretical model

The heat transfer mechanisms in inorganic hollow micro-spheres filled polymer composites are analyzed in the present paper. This heat transfer includes mainly three mechanisms: (1) thermal conduction between solid and gas; (2) thermal radiation between the hollow micro-sphere surfaces; and (3) natural thermal convection of the gas in the micro-hollow spheres. A theoretical model of heat transfer in polymer/inorganic hollow micro-sphere composites is established based on the law of minimal thermal resistance and the equal law of the specific equivalent thermal conductivity, and a corresponding equation of effective thermal conductivity is derived. The effective thermal conductivity (k_eff) of hollow glass bead-filled polypropylene composites is estimated by using this equation, and is compared with the numerical simulations by means of a finite element method. The results show that the variation of the theoretical estimations of k_eff are similar to the numerical simulations at lower filler volume fraction (φ_f20%). Moreover, k_eff decreases linearly with increasing φ_f, and reduces somewhat with increase of filler size.     

钴镁铁水滑石的合成、表征及衍生复合氧化物酸碱催化活性研究

以Co(NO3)2.6(H2O)、Mg(NO3)2.6(H2O)和Fe(NO3)3.9(H2O)为原料,以NaOH和Na2CO3为沉淀剂采用低过饱和共沉淀法合成了CoMgFe系列的碳酸根水滑石,通过XRD,IR,TG-DTA,等手段对样品进行测试和表征,X-衍射结果显示,其M2 /M3 投料物质的量比为2-4得到的水滑石为理想构型。经焙烧后,发现其复合氧化物对乙醇催化脱水、脱氢反应有一定的活性。     

CuAl水滑石的合成及其催化活性

以Cu(NO3)2.6(H2O)和A l(NO3)3.9(H2O)为原料,NaOH和Na2CO3为沉淀剂,通过低过饱和共沉淀法合成了CuAl系列的碳酸根型水滑石,其结构经XRD,IR及TG-DTA表征。于55℃焙烧24 h后发现其复合氧化物对乙醇催化脱水、脱氢反应有一定的活性。