ORGANIC GEOCHEMISTRY OF ARTIFICIALLY HEATED SPHAGNUM COAL CONSIDERED AS POSSIBLE SOURCE ROCK FOR OIL AND GAS

A preliminary study of simulated thermal maturity has been conducted to evaluate the oil, gas and hydrocarbon generation potential of sphagnum coal in the Jinsuo brown coal basin, Yunnan Province and to understand the characteristics of the element composition and biomarkers in the course of thermal alteration. The experimental result was compared with that of xylitic coal, a kind of lithotype of soft brown coal. It is considered that sphagnum coal possesses the potential of forming economic accumulation of oil and gas. Its highest proportion of oil and hydrocarbon generation is 510 mg/g Corg. and 232.1 mg/g Corg. respectively. At an R_(ran)~° value of 2.51%, the ratio of gas generation from sphagnum coal attains to 620.5 ml/g Corg. In view of sphagnum coal being different from the conventional soft brown coal in various respects such as coal forming raw materials and enviroments as well as physico-chemical properties, it is Suggested as a special kind of source rock for coal-generated oil and gas.     

固体的冲击拉伸碎裂

固体材料在冲击拉伸载荷作用下常常会断裂成多个碎片(碎片化)，固体材料碎片化的物理机制是多点损伤同时在固体中成核和发展，导致固体多处破坏。自 Mott 对固体的动态碎裂问题进行了开创性研究后，几十年来，对固体动态碎裂机制的研究一直是应用物理学、力学、航天和兵器工程等领域共同关心的重要课题。本文介绍了在冲击拉伸载荷作用下固体的动态碎裂研究的发展历史，给出相关的理论分析、实验研究和数值模拟的研究进展，特别针对现有的各种关于碎片尺度、碎片分布、以及碎片化物理机制的理论模型进行了较详尽的阐述和讨论，最后指出现有实验和理论研究中仍然存在的关键科学问题及进一步的研究展望。     

Loading rate and confining pressure effect on dilatancy,acoustic emission,and failure characteristics of fissured rock with two pre-existing flaws

Investigating the dilatancy, acoustic emission and failure characteristics of fissured rock are significant to ensure their geotechnical stability. In this paper, the uniaxial and triaxial compression experiments with AE monitoring under different loading rates were carried out on fissured rock specimens with the same geometrical distribution of two pre-existing flaws. The dilatancy and AE activity of these specimens were discussed, and the effects of the confining pressure and loading rate on the mechanical parameters and failure characteristics were analyzed. The results show that the exponential strength criterion is more suitable than the Mohr–Coulomb strength criterion to characterize the strength characteristics of fissured rock. The crack evolution and failure characteristics of fissured rock specimens are more complicated than those of intact rock specimens. The failure characteristics of the fissured rock follow the tensile shear coalescence model, crack branching occurs with increasing the loading rate, and the multi-section coalescence model is verified with increasing the confining pressure. The phenomena of stress drop and yield platform usually occur after the dilatancy onset, the specimen does not fail instantaneously, and the propagation and coalescence of cracks cause a sharp increase in the AE signals, circumferential strain, and volumetric strain.     

Adhesive fracture of heterogeneous interfaces

We have studied the effect of interface heterogeneity on fracture, at both local and global scales. The single cantilever beam adhesion test was used to investigate interfacial fracture between polycarbonate plates and an elastic/fragile epoxy adhesive. Two surface treatments were applied to a (given) polycarbonate plate giving zones of strong and weak adhesion parallel to the crack direction. Calculated fracture energies differed from those expected from a simple rule-of-mixtures. A perturbation method, proposed by Rice, was used and results compared with crack fronts observed in situ. The technique was applied successfully but the difference in values of stress intensity factor between the zones was found substantially different from the experimental value. In an attempt to explain discrepancies, specimens with discontinuous crack fronts (adhesive and/or plates severed along the strong/weak adhesion frontier) were tested. Good agreement was found with the rule-of-mixtures predictions raising questions about the role of crack front continuity in load transfer.     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

灌浆理论浅析

详细分析了两种灌浆液体的类型牛顿体和宾汉姆体的力学特征以及二者之间异同和联系,介绍了岩土体结构的基本理论、灌浆的基本理论、渗透灌浆理论机制及内容、劈裂灌浆理论机制及内容、压密灌浆理论机制及内容。     

岩石抽提物中极性化合物超高分辨质谱识别

采用具有超高分辨率的负离子电喷雾-傅立叶变换离子回旋共振质谱（ESI FT-ICR MS）分析了储层岩石抽提物中的石油酸及中性氮化物的分子组成,得到了抽提物中杂原子化合物类型分布、等效双键数（Double bonds equivalent,DBE）及碳数分布特征。研究结果表明,储层抽提物中含有多达16种不同杂原子类型的化合物,包括N1、N1O1、N1O2、N1O3、N1S1、N1S2、N2、N2S1、O1、O1S1、O2、O2S1、O1S2、O2S2、O3和O4,其中N1、N1S1、O2及O2S1类具有较高的相对丰度。抽提物中的N1类化合物以咔唑和苯并咔唑类化合物为主;N1S1类化合物以C2~C8烷基取代的咔唑并苯并噻吩类化合物为主;O2类化合物主要为1~2环环烷酸,其次还在抽提物中鉴别出具有较高相对丰度的DBE为5和6的O2类化合物;而O2S1类化合物中以DBE为7和8的O2S1具有最高的相对丰度。     

基于FDM-DEM耦合的冲击损伤大理岩静态断裂力学特征研究

为探究循环冲击损伤后大理岩的静态断裂力学特征,基于有限差分（finite difference method,FDM）-离散元（discrete element method,DEM）耦合的建模技术构建了三维分离式霍普金森压杆（split Hopkinson pressure bar,SHPB）数值模型,其中杆件系统和岩石试件分别采用FLAC3D和PFC3D程序建模。利用该模型对中心直切槽半圆盘（NSCB）试样进行了恒定子弹速度下的循环冲击,随后对受损试样进行静态三点弯曲断裂实验。通过编写Fish程序,提取试样断裂面数据,对断裂面进行重构并定量计算表面粗糙度。通过与相关室内实验结果的对比分析,验证了本文数值分析的合理性与可靠性。模拟结果表明,随着循环冲击次数的增加,试样内部微裂纹、破碎颗粒均增加。连接力场分布混乱,部分力链发生断裂。力链的变化是试样力学性能劣化的根本原因。在静态三点弯曲断裂实验中,冲击5次后试样的静态断裂韧度较天然试样产生一定程度的降低。试样在静载过程中产生的微裂纹和碎块的数量随循环冲击次数的增加而增加,断裂面粗糙度随循环冲击次数的增加而增加。     

A perturbation boundary integral equation method for analysis of interaction between foundation and nonlinear rock and soil medium

A scheme is developed for analysing the interaction between a foundation and a nonlinear rock and soil medium, in which the foundation is considered as a linear elastic body and a typical boundary integral equation method (BIEM) is employed. On the basis of taking the nonlinear properties of the medium into account, a perturbation BIEM is developed. The fundamental equations for the nonlinear coupling analysis are formulated, and typical problems are solved and discussed by the present method.     

激光切割脆性材料的温度场模拟

激光切割脆性材料是一个复杂的光致热过程。在综合考虑材料的热物性参数、初始条件及边界条件的情况下,运用Ansys软件建立了激光切割脆性材料温度场的三维有限元模型。采用APDL语言实现了对热流密度的高斯分布和强制对流换热及移动激光热源的模拟。通过设置不同的激光切割参数,对温度场的变化进行了模拟分析。所建立的温度场模拟系统可以对实际激光切割脆性材料的热过程进行前期预测,并能对激光切割参数的选择进行一定的优化,以减少实际切割的盲目性。