Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.     

Mathematical Modeling of Multicomponent Nonisothermal Adsorption in Sorbent Particles Under Pressure Swing Conditions

A detailed model for nonisothermal sorption of multicomponent mixtures in a single sorbent particle (monodisperse or bidisperse with negligible intracrystalline mass transport limitations) under pressure swing conditions is developed in this study. The dusty-gas model is used to describe the coupling of the molar fluxes, the temperature, the partial pressures and the partial pressure gradients of the components in the pore space of the particle. The variations of the temperature are described by an energy equation in which both convective and conductive modes of heat transport are accounted for. No limitations are imposed on the number of the components in the mixture and on the type of the adsorption isotherm. The model is applied in the investigation of the industrially important air-zeolite 5A system. Two cases with respect to the surrounding gas phase are examined: infinite environment, which is representative for single particle experiments, and finite environment, which is representative for the situation in packed bed adsorbers. It is found that in an infinite environment the external and internal temperature gradients are equally important while in a finite environment the external heat transport limitations are negligible. It is concluded that in modeling the nonisothermal operation of adsorption processes occurring in packed beds it is not necessary to allow for the temperature differences between the gas phase and the surface of the adsorbing particles. Furthermore, if the temperature gradients within the particles can be neglected, only a single temperature equation is needed to describe the energy transport in the bed.     

How to Control the Chemoselectivity of the Catalytic Formation of Chiral γ-Lactams or 2,3-Disubstituted Pyrroles by the Choice of Solvent

Summary. The reaction of the unsaturated imine methyl(3-phenylallylidene)amine with ethylene and carbon monoxide in the presence of catalytical amounts of Ru₃(CO)₁₂ leads to the formation of two heterocyclic products. One of the products is a chiral γ-lactam, the other one a 2,3-disubstituted pyrrole derivative, in which only the carbon atom from carbon monoxide is incorporated. The selectivity in the formation of the products may be controlled by the choice of solvent. In general, in nonpolar solvents the formation of the lactam is preferred whereas the use of more polar solvents enhances the yield of the pyrrole. For most of the solvents used there is a linear dependence of the product ratio on the relative permittivity of the corresponding solvent. Typically, polar aprotic solvents do not follow this rule.     

药物相互作用及其临床意义

介绍了药物相互作用的概况和药物在药物动力学方面、药效学及在体外相互作用的一些临床表现.特别是因药物相互作用而引起的药物不良反应问题应引起注意。     

魔角旋转核磁共振代谢组学方法对镧、铈急性生物效应的比较研究

利用高分辨魔角旋转核磁共振(MAS 1H NMR)技术对腹腔注射不同剂量[2, 10, 50 mg/kg(体重)]的硝酸镧[La(NO3)3]和硝酸铈[Ce(NO3)3] 的雄性Wistar大鼠肝、肾组织的MAS 1H NMR谱进行比较分析, 研究了La(NO3)3和Ce(NO3)3的急性生物效应, 并结合模式识别技术对不同剂量La(NO3)3和Ce(NO3)3的急性生物效应进行了分类. 研究结果表明, La(NO3)3对大鼠的急性毒性主要表现为肝毒, Ce(NO3)3对大鼠肝、肾同时造成损伤. 该方法可用于其它稀土及金属化合物的毒性预测和毒理学研究.     

Volumetric properties of H2O, D2O, and methanol in acetonitrile at 278.15—318.15 K

The densities of H₂O, D₂O, and MeOH solutions in acetonitrile with the solute concentrations up to 0.07 molar fractions at 278.15, 288.15, 298.15, 308.15, and 318.15 K were measured using vibrating-tube densimetry with an error 8·10^–6 g cm^–3. The limiting partial molar volumes for the H/D isotopomers of water and IaII in acetonitrile (V^– ₂ ) and the isotope effects in V^– ₂ and in excess molar volumes of acetonitrile—water mixtures were calculated. Molecules of H₂O, D₂O, and IaII form associates with acetonitrile molecules via hydrogen bonds. The associates have the packing volumes close to those in the individual solute. The water and methanol molecules were assumed to be incorporated into the acetonitrile structure without substantial changes in the latter. However, this process results in some compression of the system with a simultaneous increase in its expansibility.     

Solvent effect on pyridine derivatives. Molecular iodine donor-acceptor equilibria. The isoquinoline-I2-organic solvent system and the 2,4-lutidine-I2-organic solvent system

The absorption spectra of isoquinoline-iodine or 2,4-lutidine-iodine solutions in organic solventsn-hexane,n-heptane, cyclohexane, carbon tetrachloride, benzene, toluene, chlorobenzene, ando-dichlorobenzene have been measured and interpreted in terms of the D+I₂=DI₂ equilibrium, where D is isoquinoline or 2,4-lutidine. Values ofK (288–320°K), ΔH^o, and ΔS^o for the reaction were calculated. A correlation between theK values and the solubility parameter of the solvent (Buchowski's relation) has been found.     

Synthesis and characterization of segmented liquid crystal poly(azoxy polyester-co-polyoxypropylene)

In this study a series of a segmented copolyester, poly(4,4′-dioxy-2,2′-dimethyl-azoxybenzene dodecanedioyl) (PMABD)-co-polyoxypropylene 400 (POP), was prepared. The chain length of PMABD studied (n) was varied from 7.8-18.2, and that of POP was unchanged. The intrinsic viscosity of the segmented copolyesters was 1.04-1.30, and the number average molecular weight obtained was 2.53 × 10⁴?3.49 × 10⁴ g/mol. The mesophase texture and thermal properties of the segmented copolyesters were measured as functions of n. It was found that the insert of flexible POP between those liquid crystalline domains of PMABD did affect thermotropic properties of PMABD. As the n value was 9.0 and 7.8 (or 7.4 and 8.6% by weight POP) the texture appeared as cholesteric-like oily streaks. The effect could not be attained by simply copolymerizing a mesogenic moiety with a pair of spacers of different lengths. The fluidity and domain structure of the flexible dodecanedioyl-POP-dodcanedioyl segments are taken into account for the obtained results. © 1995 John Wiley & Sons, Inc.     

On the theory of solvent effects

A simple electrostatic analysis is given of the virtual charge (solvaton) model to represent the environment effect on the electronic wave function of a solute immersed in a polarizable surrounding. New features of this model are found. The classical aspects are discussed and secondly the quantal implications are considered. A correct Hartree-Fock-like operator is derived which represents an electron in a molecular orbital subjected to the average effect of the other electrons and to the reaction field produced by the virtual charges on the atomic centers.A general formalism based on the preceding model is presented in appendix. The final equations have a form similar to Newton's equation to represent a solvated electron. Unlike some other theories in this field, there is no cut-off involved in the evaluation of the molecular integrals.