用于流化床燃烧脱硫的石灰石的反应活性评价和测试研究

对用于燃煤流化床燃烧脱硫的脱硫剂石灰石的反应活性进行了研究，提出了易于进行数学处理的石灰石硫盐化模型，得出了评价石灰石反应活性的两个指标－最大转化率和反应速率常数。研究方法除采用了传统的热天平法和鼓泡流化床外，还根据循环流化床燃烧技术的特点，发展了提出了湍流床法和石英棉法，并进行了不同试验条件下的实验研究，对不同反应活性温度技术进行了试验比较。     

悬浮床加氢裂化水溶性催化剂的筛选与表征

催化加氢作用, 当金属组分A和组分B浓度分别为 15 μg/g ～ 25 μg/g 和 1100 μg/g～1300 μg/g时催化剂具有较好的催化加氢活性。两元水溶性催化剂硫化后的XPS、XRD和TEM分析结果表明：活性组分经硫化反应后生成了金属硫化物,但组分A硫化率不足50％;组分B易硫化结晶,其晶粒成为组分A的硫化物晶粒或颗粒分散的“载体”,使组分A的硫化物具有较高的分散度,提高了催化剂的加氢活性;A-B双金属水溶性催化剂经硫化反应后所形成的颗粒尺寸在100 nm左右,说明两元金属催化剂在硫化结晶过程中确实存在相互分散和抑制晶粒增长的作用。     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

旋转填充床的流体力学特性与传递过程的理论研究进展

旋转填充床(RPB)是一种高效的强化传递过程设备，亦是一种高效的混合与多相反应设备，在化工、材料、冶金、能源、环保等领域有着广泛的应用前景。本文概要地介绍了近年来对该类装置的流体力学特性和传递过程的理论研究进展。     

Axial dispersion in a liquid fluidized bed of particles akin to immobilized enzymes

The axial dispersion of a liquid fluidized bed of controlled pore silica (CPS) particles has been determined by the pulse tracer method. The CPS used was the same as for enzyme immobilization, having an average diameter of 0.436 mm and mean pore size of 37.5 nm. The fluidization liquid is α-amylase liquefied manioc starch, 30% w/v, 45°C pH=4.5. Nominal bed porosities tested were 0.7 and 0.8. The results show that the axial dispersion coefficient increases with greater superficial liquid velocities. Various available correlations tested disagree with each other to a large extent and are unable to represent collected experimental data.     

垃圾在流化床中焚烧NO排放特性研究

在Ф150 mm流化床上，研究了六类典型组分垃圾NO转化率与床温和过量空气系数(excess air简称EA)的关系。研究发现，纸渣与木块NO转化率最高，橡胶与塑料最低;织物、纸张、厨余、木块、塑料NO均具有中温生成特性，一般在800 ℃～850 ℃时即接近最大值，之后温度升高对NO的生成影响不大;橡胶与无烟煤由于含N化合物结构稳定，其NO转化率随床温升高而增大;由于挥发分析出的相互影响，较低的火焰温度，混合垃圾NO转化率一般低于单组分垃圾的线性叠加;少量水分不会对垃圾NO转化率造成很大影响，相反还会促进NO的转化，但过量水分会抑制NO的生成。     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

循环流化床(CFB)煤/焦气化反应的研究 Ⅰ.操作气速、固体循环速率对循环流化床气化反应的影响

报道了山西西山焦煤飞灰，在小型循环流化床气化反应器上，以二氧化碳为气化介质，在不同操作条件下（气速、固体循环速率）的气化反应。研究结果表明，ＣＯ出口浓度及碳转化率随着ＣＦＢ操作气速减小、固体颗粒循环速率的增加而增加。即在ＣＦＢ床中，提高气体、固体停留时间（床内固体颗粒浓度）有利于ＣＦＢ气化的进行。ＣＯ浓度及碳转化率沿床高的变化趋势与床内颗粒浓度分布一致。     

Liquid fluidized bed starter culture ofTrichoderma reesei for cellulase production

A starter culture ofTrichoderma reesei (Rut-C30) prepared in a liquid fluidized bed reactor (LFBR) gave better growth and greater cellulase production in submerged fermentation than a conventional shake flask inoculum. The LFBR starter was prepared by first coatingT. reesei spores to 0.25 mm size corncob (1.0x10⁸g^-1) in a medium containing 1.0% corncob, 0.5 gL^-1 xylose and 0.1 gL^-1 lactose in a balanced salt solution, then fluidizing the particles in the LFBR for 36 h to allow germination of the spores, and covering the particles with an approx 30 μm thick biofilm. This biofilm that developed in constant adherence to the lignocellulosic carrier, apparently became well adapted to grow rapidly on insoluble cellulose substrates (Solca Floc), and had the enzymes of the cellulase complex induced for increased cellulase production. The LFBR starter used in a stirred tank reactor (STR) gave 15 gL^-1 biomass production and 6.5 IU mL^-1 overall cellulase activity with a volumetric productivity of 64 IU L^-1h^-1 in a 5 d fermentation, compared with a 7 d shake flask inoculum that gave 11 gL^-1 biomass and 3.2 IU mL^-1 cellulase activity, with a volumetric productivity of 31IU L^-1h^-1. The LFBR starter culture retained its viability in dry storage for 6–9 mo.     

扩张床吸附技术

扩张床是流化床的一种特例。它具有流化床的特点,能处理含悬浮颗粒的液体。又具有固定床的优点,流动成活塞流;返混程度低,分离效率高。作为蛋白质的初步分离方法,它能取代固液分离、浓缩和初步纯化等三步操作。具有提高收率、降低投资费用、缩短操作时间等优点,成为生物工程下游过程的研究热点。本文综述了近年来扩张床吸附技术的发展。包括：1、原理：床层的分层稳定性、吸附剂和吸附柱;2、操作：吸附、洗涤、洗脱和再生4个步骤;3、流动动力学特性：床层扩展特征和停留时间分布;4．在蛋白质纯化中的应用。