Complex turing patterns in non-linearly coupled systems

Recently pattern formation in layered structures, showing complicated superimposed patterns, has been modeled by coupling two Turing systems linearly, i.e., passively, such that the characteristic length scales of the independent systems are well separated. Here we propose a model of two non-linearly coupled Turing systems to study pattern formation in layered membrane-like structures, where the coupling plays an active role and changes the kinetics of the uncoupled systems. Extensive numerical simulations show that non-linear coupling generates a number of new regular patterns different from the ones observed earlier with linearly coupled systems. Some of them turn out to be superimposed patterns with different length scales, but many are not. Also, contrary to the linear coupling case, the strength of the non-linear coupling is found to play an important role in the formation and selection of patterns.     

First-principles study of fundamental properties and electronic structure of alloys

We have performed first-principles calculations using full-potential augmented-plane-wave method to investigate the fundamental properties of the Cd_1–xZn_xTe alloys. The composition dependence of the lattice constant and the bulk modulus have been estimated from total energy calculations. By means of the analytical fitting the band structures in the vicinity of the Brillouin center a complete set of effective electron- and hole-masses have also been derived. In order to further understand the effects of the chemical bonding on the above macroscopic properties we then studied the relaxation behaviors and the changes of the electronic states upon alloying for x=0.25 system. The results presented here yield a general understanding of the fundamental properties for the Cd_1–xZn_xTe crystals studies.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes:Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

羟甲基化木质素磺酸盐添加剂对钻井液性能的影响

为了进一步优化木质素磺酸盐作为钻井液处理剂的效能,利用其与甲醛的羟甲基化反应制备了羟甲基化木质素磺酸盐;采用红外光谱仪、X射线粉末衍射仪、扫描电镜等分析了其结构;测定了改性前后的木质素磺酸盐对钻井液流变性、降滤失性、黏土水化膨胀抑制性等性能的影响.结果显示,改性后的羟甲基化木质素磺酸盐的整体结构变化不大,但羟基数量增加,与水的相溶性增强.与木质素磺酸盐相比,羟甲基化木质素磺酸盐在室温下对基浆有较强的提黏作用,经180℃高温老化后降黏、降滤失作用有所增强,形成的泥饼厚度降低,对黏土水化膨胀的抑制作用增强.     

Pandemic-Driven Development of a Medical-Grade,Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost–benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.     

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

This work aims to determine the influence of fused deposition modeling (FDM) printing parameters on the mechanical properties of parts fabricated on an Ultimaker2 printer with acrylonitrile butadiene styrene (ABS). The effect of several parameters such as interlayer cooling time (ILCT), nozzle diameter, infill density, raster angle and layer thickness on the ultimate tensile strength, yield strength, and elastic modulus of produced parts was evaluated. Two independent studies were conducted: a first study dedicated to the ILCT and a second study where the influence of other parameters was evaluated through a design of experiments (DoE) approach. Both studies were carried out through the execution of standard tensile tests. The statistical analysis of tensile tests results was processed with the ANOVA methodology. The obtained results indicate that a reduced ILCT improves the tensile strength of parts. It is shown that nozzle diameter and infill density are the parameters that most influence the mechanical properties of ABS, with the upper range selected values improving the studied mechanical properties. The raster angle configuration of (?45^o/45^o) benefits UTS and yield strength of ABS samples. Interactions of nozzle diameter on layer thickness were detected. It was observed that smaller layer thickness promotes a higher elastic modulus and UTS; however, for thinner layers (0.06‐0.10 mm), no significant differences were found on strength of samples due to potential high distortion levels.     

基于拓扑优化和深度学习的新型结构生成方法

计算机辅助设计已广泛应用于结构计算和分析,但如何利用计算机智能生成最佳的新型结构还面临巨大挑战。针对这一问题,提出了一种基于拓扑优化和深度学习的新型结构智能生成方法。该方法首先通过结构拓扑优化分析获得不同参数下的优化结果制作训练集图片,并将训练集标签定义为相应的工况类型,然后应用最小二乘生成对抗网络(LSGAN)深度学习算法进行训练并生成大量的新型结构,最后建立评价指标和评估体系对生成的模型进行评价比较,根据需求选择最佳结构设计方案。结合一个铸钢支座节点底板设计的工程案例,详细阐述了上述方法的应用过程,并借助三维重构技术和增材制造技术实现结构模型的一体化制造。研究结果表明,基于拓扑优化和深度学习的新型结构智能生成方法不仅可以自动生成新的结构,而且可以进一步优化结构的材料用量和力学性能。     

In vitro bioassays for the study of endocrine-disrupting food additives and contaminants

Endocrine-disrupting chemicals (EDCs) are capable of interfering with normal hormone homeostasis by acting on several targets and through a wide variety of mechanisms. Unwanted exposure to EDCs can lead to a wide spectrum of adverse health effects, especially when exposure is during critical windows of development. Feed and food are considered to be among the main routes of inadvertent exposure to EDCs, so there is an important need for efficient detection of EDCs in these matrices.We describe in vitro bioassays that can complement current analytical chemistry in order to detect unwanted EDCs and describe their action, emphasizing assays that can measure effects on nuclear receptor signaling or hormone production. We outline both validated and unvalidated in vitro assays currently available in the scientific community for detecting and studying the effects of EDCs, and discuss their possible role in the food-safety context. We conclude by identifying gaps in the current battery of in vitro assays available for EDCs and suggest future possibilities for development and validation.     

Mei symmetry and Mei conserved quantity of nonholonomic systems with unilateral Chetaev type in Nielsen style

This paper studies the Mei symmetry and Mei conserved quantity for nonholonomic systems of unilateral Chetaev type in Nielsen style. The differential equations of motion of the system above are established. The definition and the criteria of Mei symmetry, loosely Mei symmetry, strictly Mei symmetry for the system are given in this paper. The existence condition and the expression of Mei conserved quantity are deduced directly by using Mei symmetry. An example is given to illustrate the application of the results.     

Normalized intensity correlation function of single-mode laser system driven by colored cross-correlation noises

Considering a single-mode laser system with cross-correlated additive colored noise and multiplicative colored noise, we study the effects of correlation among noises on the normalized intensity correlation function C(s).C(s) is derived by means of the projection operator method.