羧基丙烯酸酯涂料合成及其防雾性能研究

采用种子乳液聚合法合成了一种互穿网络型羧基丙烯酸酯类聚物乳液，研究了加料方式对羧基分布的影响，结果表明丙烯酸加入到核单体中有利于羧基分布在乳胶粒表面。在体系中引入离子键交联结构提高了乳液涂料的硬度和耐水性能，离子键交联ＰＩＬＮ型涂料具有优良的防雾性能。     

水溶性ZnO量子点制备及其光学性质

利用3-巯丙基三乙氧基硅烷对ZnO进行表面修饰后沉积SiO2, 制备出水溶性SiO2包覆ZnO的量子点. 与直接采用正硅酸乙酯沉积包覆SiO2的ZnO量子点相比, 362 nm处的激子荧光发射峰的强度提高了将近4倍. 由于表面引入了巯基官能团, 量子点的水溶性明显提高, 稳定性增强, 即使在较高的盐浓度下也不会团聚. 通过改变条件, 制备出了发光波长在420 nm的蓝色荧光量子点.     

Influence of pH on formation and stability of phosphatidylcholine/phosphatidylserine coatings in fused-silica capillaries

The effect of pH on the formation and stability of phospholipid coatings in fused-silica capillaries in electrophoresis was investigated. A liposome solution consisting of 3 mM of 80:20 mol% phosphatidylcholine/phosphatidylserine (PC/PS) in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer was used as coating material. The coating was prepared by a method described earlier and five steroids were used as neutral model analytes. First, the effect of pH of the coating solution on the formation and stability of phospholipid coatings was studied at pH 6.5-8.5. The pH of the background electrolyte (BGE) solution (HEPES) was either kept constant at pH 7.4 or made similar to the pH of the liposome coating solution. Results showed that attachment of the coating on the fused-silica wall mostly depends on the protonation of amines of the phospholipids and HEPES. The ability of the phospholipid coating to withstand changes in pH was then investigated by coating at pH 7.5 and separating steroids with acetic acid, 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS), HEPES, or glycine BGE, adjusted to pH between 4.5 and 10.8. The results showed that with use of BGE solution at pH 10.8, the separation of steroids was not successful and the electroosmotic flow was high because of leakage of the phospholipid coating during preconditioning of the capillary with BGE solution. There was no phospholipid leakage with a BGE solution of pH 4.5, indicating that the protonated form of the functional groups of PS and HEPES participating in the attachment of the phospholipid coating to the capillary play an essential role in the success of the coating.     

Enhancement of the static SIMS secondary ion yields of lipid moieties by ultrathin gold coating of aged oil paint surfaces

Static secondary ion mass spectrometry (SIMS) is a powerful technique for identification and localization of pigments and binding media present in traditional paintings. Coating the surface of a cross‐section with a 20 Å thick gold layer improves the yields of secondary ions from the fatty acids and diacids. A chalk tablet containing 1% stearic acid, which was partially covered during gold deposition, is used as a test system to investigate the increase of the organic secondary ion yields upon gold deposition in SIMS imaging. A comparative study of a native and gold‐coated aged surface of a lead white‐containing linseed oil paint demonstrates the enhancement of the organic ion yields on a sample relevant for painting studies. The yields of oil paint‐derived negative ions increase by a factor of 3 whereas the yields of positive ions increase by a factor of 2–4. The different types of charged functional groups determine the degree of improvement in yield. Gold coating improves the ionization process of the fatty acids and does not influence their fragmentation. The dissociation of the lead white by the primary ion beam is reduced due to the gold coating. Copyright © 2004 John Wiley & Sons, Ltd.     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

Preparation of thin SnO2 layers by inorganic sol-gel process

SnO₂ sols were prepared in the following way: (1) precipitation of metastannic acid with aqueous ammonia from aqueous solutions of SnCl₄, (2) washing the precipitates with NH₄NO₃ solution and water, (3) peptization of precipitates in water, sometimes with an addition of HNO₃, at elevated temperature using mechanical stirring. In those sols, sometimes diluted with water or ethanol, substrates (glass or silica derived wafers) were dipped and withdrawn at various rates. Gel coatings were converted into crystalline SnO₂ by thermal treatment at 600°C. Coatings with thickness between 300–2000 Å were prepared.     

Rapid and sensitive determination of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with on-line regenerating covalent coating

A rapid, sensitive and reproducible micellar electrokinetic chromatographic method using hexamethyldisilazane as on-line regenerating covalent coating was developed for the quantification of ephedrine (E) and pseudoephedrine (PE). E and PE were derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol for laser-induced fluorescence detection. The on-line regenerating covalent coating formed a combinative double coating with the subsequently produced dynamic SDS coating. The total coating can be easily removed and conveniently regenerated on-line. The simple coating procedure was described. By a series of optimization, a running buffer of 20 mm Na(2)B(4)O(7) + 16 mm SDS was applied for the separation of the derivatives. Linear relationships for E and PE were obtained in the range of 0.044-6.60 microg mL(-1) (correlation coefficients: 0.9975 for E, 0.9981 for PE), and the detection limits for E and PE were 1.71 and 0.67 ng mL(-1), respectively. The separation speed, the reproducibility and the sensitivity were much improved over those of other capillary electrophoresis methods more recently reported. The method was applied to the analysis of the two alkaloids in traditional herbal preparations with recoveries in the range 92.8-104.8%.     

动力学涂层毛细管电泳分离双链脱氧核糖核酸片段

以异丙醇为聚合反应链转移试剂，水相法合成了短链聚N，N－二甲基丙烯酰胺（PDMA），研究表明，该聚合物能在毛细管内壁形成稳定的动力学涂层，从而有效地抑制电渗流和毛细管内壁与DNA的作用。这种介质被成功地应用于DNA片段的高效分离。     

Coating of Tetraethylorthosilicate (TEOS)/Vinyltriethoxysilane (VTES) Hybrid Solution on Polymer Films

Tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) hybrid materials were prepared and the hydrolysis and condensation reactions during processing were investigated by means of 29Si NMR solution spectroscopy. The variation of drying characteristics of the coating films was examined with respect to the tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) ratio, as well as drying temperature, by FT-IR spectroscopy. It is shown that the TO mode of Si–O–Si stretching absorption was enhanced with increasing tetraethylorthosilicate (TEOS) content and drying temperature. Also, the wettability of the coating films on polymer films was independent of the solution composition but enhanced by the precoating of poly(4-hydroxystrene) (PHS) as a wetting agent. The adhesion between the coating and the films was also enhanced when the vinyltriethoxysilane (VTES) content in the coating solution was increased.     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.