磁流变加工的连续相位板波前及光强特性

对采用磁流变抛光(MRF)工艺加工的大口径连续相位板(CPP)的波前及其光强控制特性进行了分析,对由不同的加工参数(走刀间距和走刀偏置)所加工的三组CPP进行了比较,并分析了MRF加工所引入的中频误差对CPP波前和光强特性的影响。结果表明,走刀间距为2mm、对应走刀偏置范围为0.1~0.3mm时所加工CPP的波前及其光强控制能力较差,远场有一定程度的旁瓣产生;走刀间距为2mm、偏置范围为0.4~0.5mm时所加工CPP和走刀间距为1mm、偏置范围为0.1~0.3mm时所加工CPP相比较,迭代加工效率提高,CPP波前中频误差得到一定的改善。进一步分析表明MRF所引入的中频误差对CPP波前梯度及旁瓣影响较大。     

椭偏法测量云母波片相位延迟量及双折射率

为了得到云母波片的相位延迟量和双折射率随波长的变化关系,利用椭偏光谱仪连续测量了云母波片在400~770 nm光谱范围内的延迟量.在对云母波片进行校准后,测量的数据被光电探测器收集并输送到计算机,根据输出的数据可以得到云母波片的相位延迟量随波长的变化.利用测得的延迟量计算出了云母波片在一定光谱范围内的双折射率,得到了云母波片的双折射率色散曲线,并通过拟合得到了双折射率色散公式.该方法能测量任意波片的相位延迟量,并且具有测量方便、周期短、精度高等特点.     

微型激光光学引擎中光学噪音的抑制

分析了微型激光投影引擎的两种主要光学噪音|干涉网格和激光散斑产生的基理|提出采用振动的随机位相板同时实现干涉网格和激光散斑抑制的方法并进行了理论分析|自行设计了微型激光投影引擎,利用微型电控马达带动随机位相板振动,用CCD相机在不同的F#及曝光时间下对投影图像进行了采集,并对图像的散斑对比度行了测试.结果表明,通过静止的随机位相板可以很好地抑制干涉网格噪音|通过使随机位相板以大于视觉暂留效应形成的融合频率进行振动,可以同时抑制干涉网格和激光散斑,使得散斑对比度小于5%,达到投影观察的要求.     

螺旋光子筛用于相衬成像的模拟研究

为了提高螺旋波带片用于相衬成像的分辨率和成像对比度,因此本文将螺旋波带片的透光环带替换为透光微孔,以类-贝塞尔函数作为螺旋光子筛透过率的振幅调制窗函数设计了一种螺旋光子筛.在相同的特征尺寸下,螺旋光子筛比螺旋波带片具有更大的数值孔径,因此分辨率更高.同时基于光瞳切趾原理,经过类-贝塞尔振幅调制窗函数对螺旋光子筛透光微孔的分布进行调制,螺旋光子筛的成像对比度将高于螺旋波带片.通过数值计算和仿真分析表明:螺旋光子筛的点扩展函数主瓣宽度相对于螺旋波带片更窄,旁瓣幅值也相对更低.在相衬成像中,螺旋光子筛不仅能够消除螺旋波带片对圆盘状位相物体成像时图像的"浮雕"效应而且能够更为清晰地分辨出位相跳变更为密集的周期矩形条状物体.因此,螺旋光子筛用于相衬成像中将具有更高的成像分辨率和成像对比度,其在医学领域将具有广阔的运用前景.     

Stagnation point flow and heat transfer over a non-linearly moving flat plate in a parallel free stream with slip

An analysis is presented for the steady boundary layer flow and heat transfer of a viscous and incompressible fluid in the stagnation point towards a non-linearly moving flat plate in a parallel free stream with a partial slip velocity. The governing partial differential equations are converted into nonlinear ordinary differential equations by a similarity transformation, which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Dual (upper and lower branch) solutions are found to exist for certain parameters. Particular attention is given to deriving numerical results for the critical/turning points which determine the range of existence of the dual solutions. A stability analysis has been also performed to show that the upper branch solutions are stable and physically realizable, while the lower branch solutions are not stable and, therefore, not physically possible.     

A low specific on-resistance SOI LDMOS with a novel junction field plate

A low specific on-resistance SO1 LDMOS with a novel junction field plate （JFP） is proposed and investigated theo- retically. The most significant feature of the JFP LDMOS is a PP-N junction field plate instead of a metal field plate. The unique structure not only yields charge compensation between the JFP and the drift region, but also modulates the surface electric field. In addition, a trench gate extends to the buffed oxide layer （BOX） and thus widens the vertical conduction area. As a result, the breakdown voltage （BV） is improved and the specific on-resistance （Ron,sp） is decreased significantly. It is demonstrated that the BV of 306 V and the Ron,sp of 7.43 mΩ.cm2 are obtained for the JFP LDMOS. Compared with those of the conventional LDMOS with the same dimensional parameters, the BV is improved by 34.8%, and the Ron,sp is decreased by 56.6% simultaneously. The proposed JFP LDMOS exhibits significant superiority in terms of the trade-off between BV and Ron,sp. The novel JFP technique offers an alternative technique to achieve high blocking voltage and large current capacity for power devices.     

Stress and fracture analysis in delaminated orthotropic composite plates using third-order shear deformation theory

The third-order shear deformable plate theory is applied in this work to calculate the stresses and energy release rates in delaminated orthotropic composite plates with straight crack front. The delaminated parts are modeled by the general third-order plate theory, while a double-plate model with interface constraint is developed for the uncracked portion of the plate. The governing equations of the uncracked part are formulated by considering the equilibrium and the displacement continuity along the interface. As an example, a simply-supported delaminated orthotropic plate subjected to a point force is solved adopting Lévy plate formulation and the state-space approach. The mode-II and mode-III energy release rate distributions along the crack front were calculated by the J-integral. To verify the analytical results the 3D finite element model of the plate was constructed and the energy release rates were calculated by the virtual crack-closure technique. A previous second-order plate theory solution was also utilized in the course of the comparison. The results indicate a good agreement between analysis and numerical computation and that third-order theory is better in some cases than the second-order approximation.     

Mindlin–Timoshenko systems with Kelvin–Voigt: analyticity and optimal decay rates

This paper is concerned with asymptotic stability of Mindlin–Timoshenko plates with dissipation of Kelvin–Voigt type on the equations for the rotation angles. We prove that the corresponding evolution semigroup is analytic if a viscoelastic damping is also effective over the equation for the transversal displacements. On the contrary, if the transversal displacement is undamped, we show that the semigroup is neither analytic nor exponentially stable. In addition, in the latter case, we show that the solution decays polynomially and we prove that the decay rate found is optimal.     

基于燃烧实验的卫燃带结渣特性分析

将两种结渣倾向对比明显的煤粉送入均匀布置有三种卫燃带耐火材料板的煤粉炉内进行燃烧,待燃烧完成后观察不同煤种在不同卫燃带耐火材料板表面的结渣特性,并对卫燃带耐火材料板横断面进行能谱分析,得出不同条件下煤灰对卫燃带耐火材料板的侵蚀程度。实验结果表明,随炉内温度的升高,卫燃带耐火材料板表面的结渣程度以及煤灰对卫燃带耐火材料板的渗透、侵蚀程度均随之增大,特别是当炉温高于煤灰熔融温度时,卫燃带耐火材料板表面结渣程度将急剧增大;锅炉实际运行中,若可保证卫燃带表面温度在锅炉最高负荷时不超过所燃煤种的煤灰熔融温度,便可有效减少卫燃带表面结渣的可能性;碳化硅质卫燃带相对于刚玉质卫燃带具有优越的抗结渣性能。     

Layer-by-layer thin film of reduced graphene oxide and gold nanoparticles as an effective sample plate in laser-induced desorption/ionization mass spectrometry

This work demonstrated a simple platform for rapid and effective surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) measurements based on the layer structure of reduced graphene oxide (rGO) and gold nanoparticles. A multi-layer thin film was fabricated by alternate layer-by-layer depositions of rGO and gold nanoparticles (LBL rGO/AuNP). The flat and clean two-dimensional film was served as the sample plate and also functioned as the matrix in SALDI-TOF MS. By simply one-step deposition of analytes onto the LBL rGO/AuNP sample plate, the MS measurements of various homogeneous samples were ready to execute. The optimization of MS signal was reached by the variation of the layer numbers of rGO and gold nanoparticles. Also, the small molecules including amino acids, carbohydrates and peptides were successfully analyzed in SALDI-TOF MS using the LBL rGO/AuNP sample plate. The results showed that the signal intensity, S N⁻¹ ratio and reproducibility of SALDI-TOF spectra have been significantly improved in comparison to the uses of gold nanoparticles or α-cyano-4-hydroxy-cinnamic acid (CHCA) as the assisted matrixes. Taking the advantages of the unique properties of rGO and gold nanoparticles, the ready-to-use MS sample plate, which could absorb and dissipate laser energy to analytes quite efficiently and homogeneously, has shown great commercial potentials for MS applications.