三维点云物体频谱获取方法

为了简化三维物体计算全息数据和加快计算时间,提出了一种三维点云物体频谱获取方法.在分析频谱获取方法模型的基础上,由不同视角的投影图像(视图)与对应的平面波因子相乘积分的方法得到了三维点云物体频谱;介绍了视图获取算法,使用Matlab并行计算得到了一个三维‘鸟’的视图序列;根据实际物体频谱分布情况,采用高阶高斯概率分布减少视图获取数量;通过视图序列得到三维物体的频谱,采用傅里叶逆变换得到物空间内一个平面的复振幅分布,将其衍射一段距离,编码为菲涅尔全息,并进行了模拟再现和实验验证.模拟再现和实验结果表明:只需要原总视图的17.75%可以获得高质量的再现效果,验证了频谱获取方法的可行性及视图获取简化模型的正确性.所获取的三维物体频谱可以通过一定方式编码成多种全息进行三维显示,拓宽了该频谱获取方法的应用范围.     

Optical phase conjugation in the hybrid polymer liquid crystal panel

In this paper, we present experimental results of the optical phase conjugation (PC) process in nematic liquid crystal cell with a photoconducting polymer layer (PVK doped with TNF). We analyze and discuss the influence of a few parameters (applied voltage, power of the laser beams, and geometry of an experiment) on conjugation efficiency. We also present experimental results showing possible application of the optical phase conjugation phenomenon in correction of phase distortion and aberration.     

Electro-optic study of acrylate based holographic polymer dispersed liquid crystals with broad band photosensitivity

We describe the electro-optic (EO) modulation of diffraction in holographic polymer dispersed liquid crystals, recently developed for broad band photosensitivity, ranging from visible to near infrared. More than 90% EO modulation achieved for relatively low electric fields confirms the phase separation and formation of liquid crystal sub-micrometer sized droplets in the polymer matrix. Molecular reorientation induced by the applied voltage and a residual electrical current induced heating are at the origin of the EO modulation.     

单色CCD记录多波长数字全息图及再现像彩色显示

对多波长数字全息图的记录和再现像的彩色显示问题进行了研究.从菲涅耳近似算法出发,对在记录距离一定情况下,不同波长全息图数字再现像的像元所表示的几何尺寸会因波长不同而不同,从而导致各波长再现像无法重合的情况进行了讨论.通过理论分析,讨论了不同波长全息图像素数与再现像像元之间的关系、不同波长全息图记录距离与再现像像元之间的关系,据此得出的解决不同波长再现像重合问题的方法及其对再现像的影响和适用范围等问题；并对合成再现像中原始色彩信息改变及其解决办法进行了分析.通过无透镜傅里叶变换数字全息方法,以632.8 nm和532.0 nm两种波长的激光为光源,用单色CCD进行记录,验证了方法的可行性.     

含手性末端基偶氮聚合物膜的全息光栅研究

偶氮苯侧链型高分子由于其含有偶氮苯基团 ,在光作用下会发生可逆的顺反异构过程 ,具有光致取向特性 ,在光学处理、衍射光学、投影显示、光开关等许多方面具有潜在的应用性[1] .近 1 0多年来国内外学者对此类化合物进行了广泛的研究 ,已有文献报道可利用Ａｒ+激光束在偶氮苯聚合物薄膜上直接“写入”表面凸起光栅 ,并且通过原子力显微镜观测到光栅起伏 .这种光栅很稳定 ,并可以利用光学方法“擦去” .偶氮苯聚合物上述独有的性质引起了许多学者的兴趣[2 ,3] .另一方面 ,由于旋光性聚合物在光学物理性质上的优势 ,我们已将手性基团引入偶氮苯…     

Methacrylic azopolymers for holographic storage: A comparison among different polymer types

The photoinduced anisotropy and volume holographic storage in a series of polymers with different architectures and azo contents of 7% and 20% in weight have been investigated. Measurements of the birefringence (Δn) induced with linearly polarised 488 nm light show that for polymers with an azo content of 20%, the highest and more stable Δn values are achieved in copolymers with a di-block architecture. The Δn induced in polymers with 7 wt% azo content is not stable. Volume holographic polarisation gratings have been stored in the polymers. Only in the case of the di-block copolymer with an azo content of 20% in weight, the stored gratings are stable. A diffraction efficiency higher than 90% and an angular selectivity of 4° have been achieved in gratings with a period of 2 μm. It can be concluded that the di-block copolymer with 20 wt% azo content is the most suitable, among the studied copolymers, as volume holographic storage material.     

向列相液晶动态全息存储特性的研究

研究了C60掺杂向列相液晶中全息光栅的形成, 实验中我们利用了一种特殊的全息再现方法：即低电压记录, 高电压再现, 观察到清晰的全息再现像. 实验结果表明样品具有良好的全息存储能力. 分析了电压对实验结果的影响, 实验表明：为了避免动态散射的出现应使用较低的记录电压, 而再现时应采取高电压以重新激发隐藏的光栅, 提高再现的质量.     

低陡度光刻胶光栅槽形研究

为控制全息光刻胶光栅槽形,从研究显影时间、显影液温度等对光刻胶特性曲线的影响出发,采用计算机模拟和实验方法,制作出底部占宽比30%左右,陡度65°左右的低陡度光刻胶光栅掩模.研究发现：启动曝光量随显影时间的延长而减小,光刻胶特性曲线线性部分的斜率随着显影时间的增加而增加;显影液温度高的光刻胶启动曝光量大,其特性曲线线性部分的斜率也较大.这决定了制作低陡度光刻胶光栅掩模需要使用非1∶1的干涉曝光,以及必须采用较低温度的显影液进行显影处理.最终选用1∶7的干涉曝光和15℃的显影液.     

Application of liquid crystal (LC) devices for optoelectronic reconstruction of digitally stored holograms

Recent advances in high-resolution CCD detectors allow the development of the concept of digital holography that relies on the capture of 2D microinterferograms and their further numerical reconstruction. This approach is valid for optical metrology applications as it gives direct access to the phase and intensity of an object at the selected distance “d”. However, it is not convienient for direct 3D-display purposes. This is the reason why the authors propose the optoelectronic reconstruction of a hologram that is digitally recorded and transferred to another optoelectronic medium. The application of LCD matrices and optically addressed liquid crystal cells as reconstruction media is discussed. Their applicability for computer-generated and optical holograms is tested by means of simple experiments. The problems connected with limited resolution of the recording (CCD) and reconstruction (LCD, DMD) devices are considered. The comparison of the results obtained by numerical and optoelectronic means is presented, together with a discussion of the limitations and further possibilities of these techniques.     

Photorefractive dynamic holographic polariscope

In the present communication we show a real time holographic polariscope. The system is based on the dynamic anisotropic diffraction properties that happen in cubic photorefractive crystals of the sillenite family. This result represents a promising technique for possible mechanical strain and stress analysis for scientific and technical applications.