Recovery performance and characteristics in shape memory effects of aliphatic polyether urethane

The analysis on the recovery performance and characteristics in shape memory effects is helpful for the optimal design and engineering applications of shape memory polymers and their composites. To investigate the relationships among recovery performance, material parameters, and loading conditions, by taking aliphatic polyether urethane as an example, the researchers simulate the shape memory behaviors numerically using a three‐dimensional viscoelastic model. The material parameters for this model are taken from stress relaxation tests, rather than dynamic mechanical analysis tests. Both the unconstrained and the constrained recovery behaviors during strain‐controlled shape memory processes are analyzed. The results reveal that the unconstrained recovery occurs at the same temperature regardless of the applied strain values. Another interesting result is that the shape recovery temperature in unconstrained recovery situations increases and the maximum recovery stress under constrained recovery conditions decreases with the increase of heating rates. Copyright © 2013 John Wiley & Sons, Ltd.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO₂负载型催化剂,并将其用于CO₂加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%（质量百分数）时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO₂的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

高镍负载量Ni/SiO2和低镍负载量Ni-Ce/SiO2催化CO甲烷化的比较研究

采用等体积浸渍法制备了高镍负载量的13%Ni/SiO₂(13Ni/Si)催化剂和低镍负载量的7%Ni-2%Ce/SiO₂(7Ni-2Ce/Si)催化剂.通过N₂物理吸附、XRD、FT-IR、TEM、H₂-TPR/TPD等技术对催化剂进行表征,在连续流动微反装置上考察了催化剂的CO甲烷化活性.结果表明,在7Ni-2Ce/Si催化剂中NiO、CeO₂和SiO₂之间产生的相互作用,改变了Ni-O-Si键的化学环境,促进了氧化镍物种的分散和还原,进而提高了催化剂的活性比表面积,同时在催化剂表面形成了新的中等强度的CO吸附中心.与高镍负载量的13Ni/Si催化剂相比,低镍负载量的7Ni-2Ce/Si表现出更高的CO吸附能力和甲烷化活性.常压下,在CO体积分数1%和空速7 000 h^-1的反应条件下,低镍负载量的7Ni-2Ce/Si催化剂上CO完全甲烷化最低温度为230 ℃,比高镍负载量的13Ni/Si低了30 ℃.     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

Mechanistic Insights into Copper‐Catalyzed Sonogashira–Hagihara‐Type Cross‐Coupling Reactions: Sub‐Mol % Catalyst Loadings and Ligand Effects

An efficient catalytic system for Sonogashira–Hagihara‐type reactions displaying ligand acceleration in the copper‐catalyzed formation of C(sp²)? C(sp) bonds is described. The structure of the ligand plays a key role for the coupling efficiency. Various copper sources show excellent catalytic activity, even in sub‐mol % quantities. A wide variety of substituents is tolerated in the substrates. Mechanistic details have been revealed by kinetic measurements and DFT calculations.     

三维介孔氨基三亚甲基膦酸锆的合成及其担载铁催化剂的甲醛催化氧化活性

以氧氯化锆和氨基三亚甲基膦酸(ATMP)为原料合成了一种新型介孔材料氨基三亚甲基膦酸锆(NTAZP)。使用XRD、FTIR、TG-DTA和SEM等手段对所合成的介孔材料进行了结构表征和形貌分析。然后以NTAZP为载体,用Fe(NO3)3水溶液处理,得到担载Fe3+的氨基三亚甲基膦酸锆。研究结果表明,Fe3+被吸附到载体孔道中后,NTAZP结构未被破坏,Fe3+离子与NTAZP孔壁骨架上的N发生了配位作用。铁担载NTAZP(NTAZP-Fe3+)对甲醛氧化具有良好的催化活性,催化反应条件温和,催化剂稳定性良好。以载体NTAZP担载铁还避免了Fe3+进入水体,催化剂得以回收利用,避免造成二次污染。NTAZP-Fe3+是一种高效绿色的新型小分子醛类化合物氧化催化剂。     

PEG接枝氧化石墨烯的制备与细胞成像

通过酯化反应将不同分子量的聚乙二醇（PEG）接枝到氧化石墨烯（GO）表面,得到系列GO-PEG。利用傅里叶变换红外光谱（FTIR）、拉曼光谱（Raman）、扫描电子显微镜（SEM）对GO-PEG的结构和形貌进行了表征,用热重分析（TGA）测定了GO-PEG中PEG的接枝量。SEM结果表明GO-PEG的剥离程度高于GO。GO-PEG在磷酸盐缓冲溶液中具有良好的分散稳定性,稳定性与接枝量呈正相关。GO-PEG通过非共价键合作用对荧光素（Flu）的负载量可达1.75mg·mg^-1,且负载量受接枝量影响;另外,GO-PEG对Flu的释放行为具有pH值触发药物释放性能。将接枝PEG的端羟基与Flu共价键合,所得GO-PEG₆₀₀₀-Flu荧光探针实现了对HepG₂细胞的成像。     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.     

Pd增强缺陷态TiO2纳米管阵列的光催化产氢性能

通过光还原沉积法, 利用氧空位诱导作用, 在Ni掺杂的缺陷态TiO₂纳米管阵列(TNT-Ni)上得到金属 Pd含量不同的Pd-TNT-Ni催化剂. 采用场发射扫描电子显微镜(SEM)、 X射线光电子能谱(XPS)、 紫外-可见 漫反射(UV-Vis DRS)、 表面光电压(SPV)、 光致发光光谱(PL)和电化学测试等表征手段, 探究了Pd与Ni掺杂的缺陷态TiO₂纳米管阵列之间的强相互作用对其光吸收特性和载流子分离及传输效率的影响, 阐明了强相互 作用对材料光催化活性的调控机理, 提出了Pd增强Pd-TNT-Ni光催化性能的作用机理. 结果表明, 通过光还 原法制备的Pd纳米颗粒尺寸为10~20 nm的Pd₁₂₀-TNT-Ni样品的光响应值为4.22 mA/cm², 是未负载Pd样品光 响应值(1.14 mA/cm²)的3.7倍, 其具有最佳的平均产氢速率(5.16 mmol·g^?1·h^?1), 是TNT样品平均产氢速率 (0.45 mmol·g^?1·h^?1)的12倍, 表明Pd与缺陷态TiO₂纳米管阵列之间的强相互作用驱动了载流子的分离及传输, 且Pd作为电子捕获势阱及反应活性位点, 显著提高了材料的光催化性能.