Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Stancu-Sikkema算子的点态估计

本文构造了Stancu—Sikkema算子,并利用点态光滑模研究了此算子的点态逼近正逆定理.     

New isothermal equation of state of solids applied to high pressures

In the present paper, a new two-parameter inverted equation of state (EOS) is developed which is found to be working very well in the high-pressure region. To check its success and validity, this EOS has been applied in a number of solids. The computed volume compression is found to be in very good agreement with the experimental data in the whole range of pressure in all the solids. The minimum and the maximum pressure range used in the present study is 0–320 kbar and 0–3000 kbar, respectively.     

Optimal stopping problems by two or more decision makers: a survey

A review of the optimal stopping problem with more than a single decision maker (DM) is presented in this paper. We classify the existing literature according to the arrival of the offers, the utility of the DMs, the length of the sequence of offers, the nature of the game and the number of offers to be selected. We enumerate various definitions for this problem and describe some dynamic approaches. Fouad Ben Abdelaziz is on leave from the Institut Superieur de Gestion, University of Tunis, Tunisia e-mail: foued.benabdelaz@isg.run.tn.     

集中荷载下叠合梁抗剪强度

本文对低叠合面钢筋破简支在合梁二阶段受力的斜截面抗剪性能进行了试验研究，并运用非线性有限元分析和试验实测数据，得出了一个适合于集中荷载下高低叠合面叠合梁的抗剪强度计算公式．     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

A proof of Howard’s conjecture in homogeneous parallel shear flows

A rigorous mathematical proof of Howard's conjecture which states that the growth rate of an arbitrary unstable wave must approach zero, as the wave length decreases to zero, in the linear instability of nonviscous homogeneous parallel shear flows, is presented here for the first time under the restriction of the boundedness of the second derivative of the basic velocity field with respect to the vertical coordinate in the concerned flow domain.     

Separation of screw-sensed particles in a homogeneous shear field

The Stokes motions of three-dimensional screw-sensed slender particles in a homogeneous shear field are investigated, including the effects of buoyancy. Conclusions are drawn about the possibility of achieving a separation of mixtures of right- and left-handed particles. The linearity of the Stokes equations allows complex flows to be solved by adding the effects of the several terms which describe the flow in which the particle is immersed. The homogeneous shear flow considered here consists of three such terms; solutions for a series of 12 unit motions are sufficient to determine the hydrodynamic resistance tensors. The forces and torques experienced by screw-sensed particles are calculated from these 51 resistance tensors, using slender-filament theory. The results allow an estimate of the range of buoyancy parameters for which gravitational sedimentation can be neglected. The fundamental component of the particle motion is a rotation, at approximately the same angular velocity as that of the fluid. Superimposed on this are variations, of large period, in the particle orientation. A phase plane analysis is used to find the terminal orientations. Very long calculation times are required for the phase portrait. An approximate method based on azimuthally-averaged equations is developed to avoid the requirements for long time integration.     

Anisotropic elastodynamics in a half space: An analytic method for polynomial data

An initial boundary value problem for the dynamic system of anisotropic elasticity in a half space is studied in the paper. A novel method of finding an exact solution of this problem for a special polynomial form of initial data and inhomogeneous term of the system is described. On the base of this method the simulation of elastic waves in different homogeneous anisotropic half spaces is implemented.