PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

High temperature enthalpy and heat capacity of GaN

The heat capacity and the heat content of gallium nitride were measured by calvet calorimetry (320-570 K) and by drop calorimetry (670-1270 K), respectively. The temperature dependence of the heat capacity in the form C_pm=49.552+5.440×10⁻³T−2.190×10⁶T⁻²+2.460×10⁸T⁻³ was derived by the least squares method. Furthermore, thermodynamic functions calculated on the basis of our experimental results and literature data on the molar entropy and the heat of formation of GaN are given.     

产能约束下的闭环供应链制造商合作策略研究

构建了一个由制造商、回收商和零售商组成的闭环供应链模型,运用Stackelberg博弈对产能约束下制造商的合作策略进行了研究。研究发现:制造商始终有与回收商或零售商合作的经济动机,且当产能较小时,更倾向于与零售商合作;反之,则更倾向与回收商进行合作。此外,相对于无合作模式,不同合作策略对于回收率、供应链整体利润、新产品与再制品总体环境影响程度以及消费者剩余的影响会随着制造商产能大小的变化发生改变,而不同合作策略对于总体环境影响程度的影响与制造商的再制造水平也存在关联。     

Molar heat capacities and volumes of transfer of cytosine,thymine, caffeine and 1,3-diethylthymine to aqueous solutions of glycyl-glycine and L-α-alanyl-L-α-alanine at 25°C

Densities and specific heat capacities of ternary aqueous systems containing dipeptides (glycyl-glycine or L--alanyl-L--alanine) and nucleic acid bases (cytosine or thymine) or their alkyl derivatives (1,3-diethylthymine or caffeine) were determined at 25°C by flow calorimetry and flow densimetry. The partial molar volumes and heat capacities of transfer at infinite dilution of the different nucleic acid bases from water to water+dipeptide solutions were obtained therefrom. Except for the case of the transfer of cytosine to aqueous glycyl-glycine solutions where a small positive dependence of the transfer quantities was observed with the dipeptide concentration, the values of the heat capacities of transfer were in general low, positive or negative, depending on the compensation of hydrophobic-hydrophilic interactions between the dipeptide and the base. The volumes of transfer of most of the bases are very small, within the limit of the experimental error.     

Convergence of distorted Brownian motions and singular Hamiltonians

We prove a convergence theorem for sequences of Diffusion Processes corresponding to Dirichlet Forms of the kind .We obtain convergence in total variation norm of the corresponding probability measures on the path space C(₊;^d) under hypotheses which, for example, are satisfied in the case of H _loc ¹ ( ^d )-convergence of the 's, but we can allow more singular situations as regards the approximating sequences. We use then these results to give a criterion of convergence for generalized Schrödinger operators in which the potential function should not necessarily exists as a measurable function. We obtain convergence not only in strong resolvent sense, but we also obtain convergence in the uniform operator topology up to sets of arbitrarily small Lebesgue measure. Applications to the problem of the approximation of ordinary Schrödinger operators by generalized ones corresponding to zero-range interactions are given.     

Classical fluids of negative heat capacity

It is shown that new parametersX can be defined such that the heat capacity C_xT(S/T)_x is negative, even when the canonical ensemble [i.e., at fixed T=(U/S)_Y and YX] is stable. This implies an extension of the classical theory of polytropes from ideal gases to general fluids. As examples of negative heat capacity systems we treat blackbody radiation and general gas systems with nonsingular _T. For the case of a simple ideal gas we even exhibit an apparatus which enforces a constraint X(p, V)=const that makes C_x<0. We then show that it is possible to infer the statistical mechanics of canonicallyunstable systems-for which even the traditional heat capacities are negative-by imposing constraints that stabilize the associated noncanonical ensembles. Two explicit models are discussed.     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Predicting the selectivity of imprinted polymers

Summary Imprinted polymers as stationary phases for HPLC separations have been the subject of extensive investigations in recent years. In order to aid the rational design of synthetic protocols for the preparation of imprinted polymers, a series of calculations were made to assess the equilibrium concentration of templatemonomer complexes as a function of association constant (K) for the functional groups involved in the interactions and initial concentrations of reactants. This data was then used to predict the selectivity of polymers prepared under different reaction conditions and the model was tested using an experimentally determined value ofK and separation factors taken from the literature.     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.