全面成绩管理的初探

利用数量化方法,数字特征法,W ilcoxon顺序和检验法以及试卷分析的各种方法(试题难度,区分度,信度,效度等),定量地解决了影响学生成绩的主要因素,并引入全面管理方法,明显地改善了学生成绩,学生综合能力明显加强.     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

Large Sample Properties of Mixture Models with Covariates for Competing Risks

We study the large-sample properties of a class of parametric mixture models with covariates for competing risks. The models allow general distributions for the survival times and incorporate the idea of long-term survivors. Asymptotic results are obtained under a commonly assumed independent censoring mechanism and some modest regularity conditions on the survival distributions. The existence, consistency, and asymptotic normality of maximum likelihood estimators for the parameters of the model are rigorously derived under general sufficient conditions. Specific conditions for particular models can be derived from the general conditions for ready check. In addition, a likelihood-ratio statistic is proposed to test various hypotheses of practical interest, and its asymptotic distribution is provided.     

Duane模型在斯特林制冷机研制过程中的应用

介绍一种实用的可靠性增长模型杜安 (Duane)模型 ,并探讨如何运用该模型来分析、指导斯特林制冷机的可靠性增长试验 ,包括试验前的准备、试验数据的处理、曲线的绘制 ,以及如何对增长过程进行估计和监测     

Researches of DC—Problem Under the Model S in which the Numbers of Defective Coins are not Fixed

In this paper,we research general Defective Cion Problem under the model S,i.e,the number d of Defective cions is not fixed. For d=O,1,or 2. we get some good results.     

各向异性材料中共线刚性线夹杂的纵向剪切问题

本文研究各向异性材料中共线刚性线夹杂，（有时称作“硬裂纹”或“反裂纹”问题）的纵向剪切问题。利用复变函数方法，提出了一般问题的公式和某些实际重要问题的封闭形式解，考察了刚性线端点附近的应力分布．从本文解答的特殊情形，可以直接导出各向同性材料相应问题的公式和结果，包括某些已有的结果￣［７］．     

有序分组资料的线性趋势检验的确切概率计算

有序分组资料的线性趋势检验主要用于检验几个二项总体反应率的线性趋势；在医学与生物学中最典型的用途是研究剂量和反应的关系． 如果用Ｚ检验来代替通常在本检验中所用的卡方检验，就可容易地导出本检验的确切概率计算方法，和其他２×Ｃ有序列联表有着相同的形式．本文给出了该检验的确切概率计算方法．     

Measurements and simulations of particle dispersion in a turbulent flow

A particle imaging technique has been used to collect droplet displacement statistics in a round turbulent jet of air. Droplets are injected on the jet axis, and a laser sheet and position-sensitive photomultiplier tube are used to track their radial displacement and time-of-flight. Dispersion statistics can be computed which are Lagrangian or Eulerian in nature. The experiments have been simulated numerically using a second-order closure scheme for the jet and a stochastic simulation for the particle trajectories. Results are presented for non-vaporizing droplets of sizes from 35 to 160 μm. The simulations have underscored the importance of initial conditions and early droplet displacement history on the droplet trajectory for droplets with large inertia relative to the turbulence. Estimates of initial conditions have been made and their effect on dispersion is quantified.     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

An adaptive filter for gravitational-wave antennas

Summary We report on the development of an adaptive optimum filter for processing the data of a resonant bar gravitational-wave detector. This filter, based on the matched-filter theory, is adaptive in the sense that the function it realizes is derived from the actual noise spectrum of the data being analysed (instead from an idealized model of the noise). Its implementation is mostly based on frequency domain techniques. We also report on the application of the new filter to the data of the cryogenic antenna Explorer of the Rome group, with particular reference to the comparison between its performance and that of an otpimum filter with fixed values of the parameters.