Calorimetric Estimation Employing the Unscented Kalman Filter for a Batch Emulsion Polymerization Reactor

Reaction calorimetry is a very useful tool to monitor exothermic polymerization reactions as it is based on the estimation of the heat generated by the reaction. The objective of this work is to analyze the performance of an unscented Kalman filter (UKF) for online monitoring of batch vinyl acetate emulsion polymerization reactions. Reactions are performed in isoperibolic and isothermal conditions. The UKF is compared to an extended Kalman filter that has a very poor performance. The results show that the UKF is able to provide good estimates for the conversion, for the reactor and jacket temperatures, for the overall heat transfer coefficient between the reaction medium and the jacket, and for the heat loss from the jacket to the surroundings.

     

Accurate measurement of uranium isotope ratios in soil samples using thermal ionization mass spectrometry equipped with a warp energy filter

A chemical and mass-spectrometric procedure for uranium isotopic analysis using a thermal ionisation mass spectrometer equipped with a Wide Aperture Retardation Potential energy filter has been developed and applied to uranium isotopic measurements for various soil samples. Soil samples were digested using a microwave digestor. Uranium was isolated from soil samples by the chemical separation procedure based on the use of anion-exchange resin and UTEVA extraction chromatography column. The isotope ratios were measured for two certified reference materials by using a VG Sector 54-30 thermal ionisation mass spectrometer in dynamic mode with Faraday cup and Daly ion counting system. Replicates of standard reference materials showed excellent analytical agreement with established values supporting the reliability and accuracy of the method. Precision of the ²³⁵U/²³⁸U ratio was achieved by a correction factor of 0.22% amu as a function of ion-beam intensity with sample loads of around 250?ng of U. The resulting reproducibility for standards and soil samples was better than 0.2% at two standard deviations (SD). Uranium isotopic compositions have been determined in several reference soil samples such as Buffalo river sediment, NIST 2704, river sediment SRM 4350b and ocean sediment NIST-4357 and a Chernobyl soil sample. There was a significant deviation from the natural uranium in comparison with Chernobyl soil samples.     

Application of the Combustion Method in a Closed Flask to the Lead Determination in Atmospheric Aerosols

Abstract

The destruction of the filter for metal determination in atmospheric aerosols is an important step in the analysis. Nowadays the decomposition of this kind of sample has not been completely solved, so it is interesting to study new methods for filter sample attack. In the present work the application of the combustion method in a closed flask for mixed cellulose esters filter decomposition for lead determination is proposed. For this purpose optimum operating conditions as stopper flask design, sample size, flask volume, shaking time and volume and concentration of absorbing solution are established, and accuracy and precision of the proposed method using AAS for the measurements is given. The results obtained by the closed flask combustion are compared with those found by wet attack with HNO₃. The method proposed is rapid, has low reagent contamination and no loss of lead by volatilization or by amalgamation occurs. This method shows an accuracy and a precision in good agreement with the standard method.     

Application of ultra-performance liquid chromatography-tandem mass spectrometry for the determination of steroid oestrogens in wastewaters

An ultra-performance liquid chromatography method using a triple quadrupole mass spectrometer was developed and validated for the determination of steroid oestrogens in wastewater matrices. To date, analytical methods established in the literature for 17α-ethinylestradiol have been unable to achieve the proposed predicted no effect concentration of 0.1?ng?l^?1. The extensive sample pretreatment and analytical methodology proposed herein enable 17α-ethinylestradiol to be determined at very low background concentrations with a theoretical method detection limit of 0.06?ng?l^?1 which has been applied in real environmental matrices. During the validation process, a trickling filter wastewater treatment works was monitored to demonstrate the method's application. Oestrogen removal across the filters demonstrated good removals of natural free oestrogens (≥62.0%) with lower removals of the synthetic oestrogen 17α-ethinylestradiol (29.2%) from wastewaters at 10°C. The method's application illustrates its capability of detecting oestrogen concentrations in real wastewater samples comprising complex organics of comparatively high concentration. Furthermore, a complete process mass balance for 17α-ethinylestradiol is now attainable which has previously posed a challenge owing to the low environmental concentrations typically exhibited, but more significantly as a result of the lower sensitivity inherent in previously reported analytical methods.     

A new framework for implicit restarting of the Krylov–Schur algorithm

This paper introduces a new framework for implicit restarting of the Krylov–Schur algorithm. It is shown that restarting with arbitrary polynomial filter is possible by reassigning some of the eigenvalues of the Rayleigh quotient through a rank‐one correction, implemented using only the elementary transformations (translation and similarity) of the Krylov decomposition. This framework includes the implicitly restarted Arnoldi (IRA) algorithm and the Krylov–Schur algorithm with implicit harmonic restart as special cases. Further, it reveals that the IRA algorithm can be turned into an eigenvalue assignment method. Copyright © 2014 John Wiley & Sons, Ltd.     

Rapid analysis of phthalic acid esters in environmental water using fast elution gas chromatography with mass spectrometry and adaptive library spectra

A method for the fast determination of the components in a complex sample by using gas chromatography with mass spectrometry was developed and used for the quantitative analysis of phthalic acid esters in environmental water. In the method, the adaptively corrected mass spectra were used to compensate for the differences between the library spectra and the measured ones in the experiment. The correction was obtained by the iterative transformation of the library spectra using iterative target transformation factor analysis, and the resolution was performed by non‐negative immune algorithm using the corrected spectra. Rapid analysis of 16 phthalic acid esters in water samples was achieved using fast elution gas chromatography with mass spectrometry measurements. The results show that the mass spectra and chromatographic profiles of the phthalic acid esters can be obtained from the overlapping signal of 13 min elution, and accurate quantitative analysis can be obtained. The recoveries of the phthalic acid esters obtained by standard addition are between 90.3 and 107.4%, and the relative standard deviations obtained in repeated measurements are less than 9%.     

Cellulose filter paper immobilized α-glucosidase and its application to screening inhibitors from traditional Chinese medicine

In this study, α-glucosidase was successfully immobilized on cellulose filter paper and further applied to screening inhibitors from traditional Chinese medicines combined with capillary electrophoresis analysis. For α-glucosidase immobilization, a cellulose filter paper was used as the carrier and grafted with amino groups by coating chitosan, then α-glucosidase was covalently bonded on the amino-modified carrier via epoxy ring-opening reaction using polyethylene glycol diglycidyl ether as the crosslinker. Several parameters influencing the enzyme immobilization were optimized and the optimal values were enzyme concentration of 4 U/mL, polyethylene glycol diglycidyl ether concentration of 1.25%, chitosan concentration of 7.5 mg/mL, immobilization pH 7.0, crosslinking time of 4 h and immobilization time of 2 h. The immobilized α-glucosidase exhibited good batch-to-batch reproducibility (RSD = 2.1%, n = 5), excellent storage stability (73.5% of its initial activity after being stored at 4°C for 15 days), and reusability (75% of its initial activity after 10 repeated cycles). The Michaelis constant of immobilized α-glucosidase and half-maximal inhibitory concentration of acarbose were calculated to be 1.12 mM and 0.38 μM, respectively. Finally, the immobilized α-glucosidase was used for screening inhibitors from 14 kinds of Traditional Chinese Medicine extracts, and Sanguisorbae Radix showed the strongest inhibitory effect on α-glucosidase.     

Polyimidazolyl acetate ionic liquid grafted on cellulose filter paper as thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water

Recently, pharmaceuticals and personal care products in the water environment exhibited potential risks to both human and aquatic organisms. In order to improve the sensitivity and accuracy of pharmaceutical detection, the polyimidazolyl acetate ionic liquid was synthesized by Radziszewski reaction and coated on cellulose filter papers as a thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water. The attenuated total reflection-infrared spectrometry, thermogravimetric analysis, and scanning electron microscope analyses demonstrated that the polyimidazolyl acetate ionic liquid was successfully prepared and attached to the surface of the cellulose filter paper through chemical bonding. The adsorption capacity of the homemade thin-film extraction material for the four non-steroidal anti-inflammatory drugs was greater than 8898 ng/cm² under the optimum conditions, and the desorption rate was over 90%. Then, a paper-based thin-film extraction phase-high-performance liquid chromatography-tandem mass spectrometry method was established for the extraction of non-steroidal anti-inflammatory drugs in water. This method provided limits of detection and limits of quantification were in the range of 0.02–0.15 and 0.17–0.50 μg/L, respectively. Hence, the obtained thin-film extraction phase showed excellent recovery and reproducibility for the target non-steroidal anti-inflammatory drugs with carboxyl groups from water.     

Adaptive neuro-fuzzy interference system modelling for chlorpyrifos removal with walnut shell biochar

Accumulation of chlorpyrifos (CP), a pesticide, causes a significant environmental problem in food, surface/ground waters further to human health. The removal of the CP pollutant in surface/wastewater could be achieved by biochar due to the improved physical and chemical properties. In this work, the CP removal capacities of biochar samples derived from walnut shells at various temperatures from 450 to 900 °C were investigated. The experiments were performed as laboratory batch type study and the adsorption efficiency was determined at various conditions such as adsorbent dosage (10–500 mg/L), sorbate concentrations (100–1500 µg/L), contact time (0–300 min), initial pH (3–10), and the number of recycle.By subtracting the pyrolysis temperature from 450 °C to 900 °C, the surface areas were found to increase from 12.9 m²/g to 353.3 m²/g, respectively.The 143 experimental data were evaluated by a pair of kinetics and isotherm models and the Adaptive Neural Fuzzy Inference System (ANFIS). The developed ANFIS model was 98.56% successful in predicting the CP removal efficiency depending on the adsorption conditions. Walnut Shell Biochar (WSBC) can be applied for CP adsorption with 86.64% removal efficiency under optimum adsorption conditions (adsorbent = 250 µg/L, sorbate = 1000 µg/L, pH = 7.07 and contact time 15 min) thanks to its improved porosity. It was determined that the biochar samples could be reused 5 times. Equilibrium adsorption was observed to conform to the Langmuir isotherm, and the maximum adsorption capacity for WSBC@900 was 3.536 mg/g.     

A waveguide high-pass filter system for measuring the spectrum of pulsed terahertz sources

We propose a system for measuring spectra of terahertz (THz) pulses, including single pulses, which is based on high-pass filters (HPFs). The system consists of channels for measuring amplitudes of pulses (initial pulses and those transmitted via HPFs with different cutoff frequencies) and an algorithm for processing of the obtained data. The pulse spectrum is restored by using the iteration method or the amplitude–frequency method. The iteration method of spectrum restoration is applicable in the range of THz pulse durations from 10⁻⁹ s to 10⁻⁷ s. The amplitude–frequency method is applicable to THz pulses with durations exceeding 10⁻⁸ s. The system for measuring of THz pulse spectra was simulated by using the characteristics of specially developed waveguide HPFs. The relative simulation error of determining the central frequency by the amplitude–frequency method is equal to 2 · 10⁻⁶ for THz pulse durations of 10⁻⁵ s and longer.