原子发射光谱分析

本文是《分析试验室》期刊单年度定期评述中关于原子发射光谱分析的第三篇综述文章。文中对１９９３－１９９４年期间我国在ＡＥＳ领域所取得的主要进展作了简要的评述。评述内容包括基础理论、应用研究、仪器研制、新方法建立以及一般样品分析。研究领域主要涉及到电感耦合等离子体原子发射光谱法，微波等离子体原子发射光谱法，电弧和火花原子发射光谱法，辉发放电原子发射光谱法和亚稳态能量转移光谱法等。引用文献２１１篇。     

透明导电玻璃(ITO)基材自加热传感静态芯片聚合酶链反应(PCR)

利用商品化ITO玻璃导电层的温阻效应, 无需任何微加工手段, 实现了自加热和传感的芯片温度自动程序控制, 最大程度地减小了传感滞后对温度控制稳定性的影响, 温度控制的稳定性达到了0.2 ℃, 升温速度最快可达20 ℃/s以上, 在冷却风扇辅助下降温速度最快达到了8 ℃/s. 芯片温控单元的引线从传统的两对(一对用于传感, 一对用于加热)减少为一对. 通过在该芯片上直接构建多个开放微池反应器的方法成功地实现了λDNA 157 bp片段的并行扩增. 将该芯片置于倒置荧光显微镜样品台上, 以蓝色(575 nm)发光二极管为光源, 以光电倍增管为检测手段检测了dsDNA和SYBR Green Ⅰ嵌合物的荧光强度随温度的实时变化曲线.     

Dialing in color with rare earth metals: facile photoluminescent production of true white light

Combining polymeric architectures with metal ions produces hybrid materials with extremely rich properties. We are studying polymers containing terpyridine in the side chain. In this report, the chelation of lanthanide ions, Eu³⁺, Tb³⁺, and Dy³⁺ resulted in metal functionalized copolymers that exhibited excellent emission of red, green, and blue light respectively. The polymer architecture easily allows incorporation of all three colors into the material, which leads to the facile production of true white light in solution or the solid state. Quantum efficiencies for the polymer systems were determined. The white light system had an efficiency of 5%. Various combinations of colors were achieved from the basic RBG colors by simply varying the metal ion ratios in the polymer backbone. This easy tuning of the color makes these systems attractive. Copyright © 2007 John Wiley & Sons, Ltd.     

助熔剂对Y3Al5O12：Ce荧光粉性能的影响

在还原气氛下采用高温固相反应法合成了白光LED用黄色荧光粉Y3Al5O12:Ce(YAG:Ce)研究了助熔剂对YAG：Ce荧光粉发光特性的影响，。XRD的测量结果表明加入合适的助熔剂有利于YAG:Ce荧光粉的晶化，并且不引入杂相，选择BaF2和H3BO3同时使用效果要好于单独使用一种助熔剂，助熔剂的加入可增大YAG：Ce荧光粉的激发和发射光谱强度，并能有效降低荧光粉的中心粒径（D50）控制粉体的粒径分布，适用于白光LED的制造。     

原子发射光谱法间接测定黄连素片剂中盐酸小檗碱的研究

本文提出了离子对-原子发射光谱间接测定黄连素片剂中盐酸小檗碱的新方法。发现用1,2-二氯乙烷作萃取剂效果最佳。用此怯测定实际样品的结果与药典法一致,相对误差为0.61％,单一测定的相对标准偏差为0.67％。本法还可在盐酸普鲁卡因共存下单独测定盐酸小檗碱。方法可靠、适用,选择性较好。     

桥链七甲川菁的合成及光性能

菁是一种具有多功能用途的染料,除用作卤化银感光材料及有机光导材料的光谱增感剂、光记录材料中记录介质外,还可作为染料激光器中用的激光染料.我们曾合成了四甲川苯乙烯菁、五甲川(艹粦)及五甲川吡喃鎓等红外染料作为激光染料,测定了它们的光性能.本文合成了具有桥链的七甲川菁,研究了这些桥链七甲川菁的吸收光谱及荧光光谱,并以YAG激光倍频(532nm)作泵浦源,测定了它们的激光调谐范围、中心波长及激光转换效率.     

Nitriding of titanium with plasma jet under reduced pressure

The nitriding of titanium with argon-nitrogen (3%) and argon-nitrogen (3%)-hydrogen (2%) plasma jets at pressures of 190 torr was studied. The reaction kinetics obeyed mainly a parabolic law. The parabolic kinetic constants were 10^–10–10^–8 g² cm^–4 s^–1, which were 2–3 orders of magnitude larger than those in R.F. discharges. From emission spectroscopy, nitrogen atoms in the excited states were observed. The nitrogen atoms can promote the nitriding reaction. The effect of the addition of hydrogen to nitrogen is also briefly discussed.     

Diagnosis of OH Radical by Optical Emission Spectroscopy in Atmospheric Pressure Unsaturated Humid Air Corona Discharge and its Implication to Desulphurization of Flue Gas

OH radical in the corona discharge with pipe–nozzle–plate electrode has been diagnosed by optical emission spectroscopy. Spatial variations of OH radical emission in discharge gap have been measured. Relative intensity of OH radical emission spectroscopy increases with increasing water vapor flux injected into the reactor or intensity of electric field supported. In positive pulsed corona discharge, relative intensity is higher than that in positive DC corona discharge and lower than that in negative DC corona discharge. Strongest intensity of OH radical spectrum appears within the range of 5 mm near the discharge nozzle- electrode. In addition, it is proved that the efficiency of desulphurization from flue gas by pulsed corona discharge plasma processes can be improved when OH radical is produced in the reactor.     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

工科学校本科生科研训练与实践——以节能减排大赛为例

Scientific research training is an essential part of undergraduate learning, which plays an important role in improving students' knowledge utilization and scientific literacy. Taking the participation process of "Energy conservation and emission reduction competition" as an example, this paper briefly introduces the undergraduate scientific research training of students majoring in polymer materials and engineering from their own perspective, and the way to combine the discipline and school characteristics to reflect the thinking of engineering students in scientific research and practical application.