不同结构驱油聚合物的界面剪切流变性质

利用双锥法研究了油田现场用超高分子量部分水解聚丙烯酰胺(PHPAM)和疏水改性聚丙烯酰胺(HMPAM)溶液与航空煤油间的界面剪切流变性质,考察了时间、应变幅度和剪切频率对不同浓度PHPAM和HMPAM溶液界面剪切流变参数的影响.结果表明,只有在适宜的剪切频率条件下,流变数据才能反映界面膜的结构信息.HMPAM分子具有界面活性,能吸附在界面上,其界面膜的强度随时间变化逐渐增强,且在高浓度时以黏性为主;PHPAM分子不具有界面活性,其剪切流变参数没有时间依赖性,界面层以弹性为主.HMPAM能通过疏水作用形成界面网络结构,界面膜的剪切复合模量明显高于PHPAM界面层.HMPAM界面层中网络结构在剪切形变作用下的破坏与重组这一慢弛豫过程是其强度较高的原因.     

利用活性炭色谱柱一步分离纯化独一味中总环烯醚萜苷类成分的方法

<正>公开号:CN103432195A公开日:2013.12.11申请人:张泉龙摘要本发明涉及一种利用活性炭色谱柱分离纯化独一味中总环烯醚萜苷的方法,其特征是将独一味地上部分用乙醇提取,提取液浓缩成浸膏,浸膏溶解后上活性炭色谱柱,先用蒸馏水冲洗至无色,再用70%~90%乙醇洗脱,收集流份,即得。采用活性炭(0.42~0.5 mm)为色谱柱固定相,用70%~90%乙醇为流动相洗脱,所得总环烯醚萜苷类成分的     

Ni/CeO2-SiO2催化剂的制备、表征及其甲烷部分氧化制合成气性能

以硝酸亚铈（Ce（NO₃）₃·6H₂O）和正硅酸四乙酯（C₈H₂₀O₄Si）为前驱体,采用溶胶-凝胶法合成了系列具有大比表面积的xCeO₂-（1-x）SiO₂（x = 0,0.25,0.50,0.75,1）复合氧化物载体,然后浸渍活性组分Ni制得用于甲烷部分氧化制合成气的Ni催化剂。运用N₂物理吸附-脱附、X射线粉末衍射、扫描电镜、紫外-可见漫反射光谱、氢程序升温还原、氨程序升温脱附和热重等手段对所得催化剂的组织结构、还原性、表面酸性和积炭行为等进行了表征;同时考察了催化剂的组成、焙烧温度和反应时间等对催化剂在甲烷部分氧化制合成气中催化性能的影响。表征结果表明,该系列Ni/CeO₂-SiO₂催化剂具有大比表面积,CeO₂晶粒较小,NiO的分散性好且易被还原,表面酸性弱,不容易积炭。当Ce/Si摩尔比为1：1,活性组分Ni的质量分数为10%,焙烧温度为700℃时,所制备的Ni/CeO₂-SiO₂催化剂表现出较好的稳定性、最高的CH₄转化率（~84%）和对产物CO及H₂的选择性（>87%）。     

更正

<正>本刊2014年77卷第2期172页上的图1有部分曲线未能显示出来,正确的图请见该期图文摘要部分97页最下方的插图。对于由此给作者和广大读者带来的不便,特表歉意。     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

双动点中的分类思想

分类是一种重要的数学思想方法,平面图形中双点运动时,常有某个元素不能确定,需作分类处理.     

Design of phase plates for shaping partially coherent beams by simulated annealing

Taking the Gaussian Schell-model beam as a typical example of partially coherent beams, this paper applies the simulated annealing （SA） algorithm to the design of phase plates for shaping partially coherent beams. A flow diagram is presented to illustrate the procedure of phase optimization by the SA algorithm. Numerical examples demonstrate the advantages of the SA algorithm in shaping partially coherent beams. An uniform flat-topped beam profile with maximum reconstruction error RE 〈 1.74% is achieved. A further extension of the approach is discussed.     

部分线性模型中估计的收敛速度

考虑回归模型（Ⅰ）：其中（ｘ＿ｉ，ｔ＿ｉ）是固定非随机设计点列，ｘ＿ｉ＝（ｘ＿（ｉｌ），…，ｘ＿（ｉｐ））＇β＝（β＿１，…，β＿ｐ）＇（ｐ＞１），ｇ是定义在［０，１］上的未知函数，β是未知待估参数，０＜ｔ＿ｉ＜１，ｅ＿ｉ是ｉ．ｉ．ｄ．随机误差，且Ｅｅ＿ｉ＝０，Ｅｅ＝σ￣２＜∞。基于ｇ的估计取一类非参数权估计（包括常见的核估计和近邻估计），我们讨论了β的最小二乘估计及ｇ的估计的最优强弱收敛速度。     

On Weak Regular ^＊-semigroups

In this paper, a special kind of partial algebras called projective partial groupoids is defined.It is proved that the inverse image of all projections of a fundamental weak regular ^*-semigroup under the homomorphism induced by the maximum idempotent-separating congruence of a weak regular ^*-semigroup has a projective partial groupoid structure. Moreover, a weak regular ^*-product which connects a fundamental weak regular ^*-semigroup with corresponding projective partial groupoid is defined and characterized. It is finally proved that every weak regular ^*-product is in fact a weak regular ^*-semigroup and any weak regular ^*-semigroup is constructed in this way.