聚（对羟基苯甲酸／6—羟基萘—2—酸）纤维结晶结构的研究

用X－射线衍射和热分析的方法对聚（对羟基苯甲酸／6－羟基萘－2－酸）共聚芳酯纤维结构及其在热处理中的变化进行了研究。结果表明，尽管沿分子链方向共聚单体呈无规分布，但共聚组分仍能形成共晶，纤维具有一定的空间规整性，经强化热处理后，纤维结晶结构发生了变化。     

活性炭纤维电极电解法处理墨绿B染料废水

将铁丝缠绕在活性炭纤维(简称ACF)上制成电极,并在阴极鼓入空气,用电解生成的Fenton试剂处理墨绿B染料模拟废水.研究了电压、pH值、温度、空气流量、支持电解质的浓度等因素对染料脱色率的影响.结果表明,pH值越低,温度越高,处理效果越好,气流量的改变对于处理效果影响不大.室温时处理浓度为50mg·L-1的活性染料墨绿B,在实验电压为11V,中性条件下,无水硫酸钠的浓度为20g·L-1,通入空气流量为60L·min-1时,处理60min,色度去除率达到95%左右.55℃时,电解30min色度去除率就达到96%,60min时达到100%.     

高密度聚乙烯/全同立构聚丙烯共混物超拉伸纤维的热行为与力学行为

用热拉法制备了高密度聚乙烯(HDPE)/全同立构聚丙烯(iPP)共混物超拉伸纤维,研究了拉伸比对其热行为及力学行为的影响,随拉伸比增加,纤维中HDPE与iPP的结晶度增大,熔融温度升高、熔程变宽;纤维中HDPE与iPP的结晶度低于其纯组分,熔融湿度与熔程基本不受组分比的影响,随拉伸比增加,纤维的模量增高,以HDPE为主的纤维的拉伸强度增大,以iPP为主的纤维拉伸强度增至一定值后,不再随拉伸比增加而增大,并有下降趋势。     

ZrO2纳米粉末复合羊毛纤维研究

ＺｒＯ_２纳米粉末复合羊毛纤维研究陈代荣，樊悦朋（山东大学化学系济南２５０１００）关键词ＺｒＯ_２纳米粉末，羊毛纤维，复合纤维由陶瓷粉末和天然纤维形成的复合纤维的强度、织品的保暖性、抗起球性及防缩性能等均有所提高，报道较多的是微米级陶瓷粉末（粒径０．５...     

Electrospun nanofibers of poly（vinyl pyrrolidone）/Eu^3＋ and its photoluminescence properties

Nanofibers of poly（vinyl pyrrolidone） （PVP）/Eu^3＋ with diameters of 300-900 nm were prepared by using sol-gel processing and electrospinning technique. The products were characterized by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, and photoluminescence （PL）. The results indicated that, Eu^3＋ was successfully embedded in the onedimensional hybrid nanofibers, and the PVP/Eu^3＋ hybrid nanofibers had favorable photoluminescence properties.     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

PET导电纤维的制取及研究

以过氧化二苯甲酰为引发剂,使丙烯睛在涤沦(PET)纤维上接枝共聚。接枝纤维在含铜化合物,含硫还原剂溶液中反应,制备PET导电纤维。讨论了影响接枝共聚的各种因素,选择出最佳聚合条件。对该纤维的导电成份和结构以及性能进行了研究。     

3-甲基-1-苯基-4-{4-([5-甲基-2-(4-取代芳基)-噁唑-4-基]甲氧基)-芳亚甲(苄)基}-2-吡唑啉-5-酮的设计、合成与降血糖活性

设计合成了具有降血糖活性的3-甲基-1-苯基-4-[4-[[5-甲基-2-(4-取代芳基)-噁唑-4-基]甲氧基]-芳亚甲(苄)基]}-2-吡唑啉-5-酮类化合物.用丁二酮单肟和(取代的)苯甲醛环合、氯化得到氯甲基噁唑衍生物,与对羟基苯甲醛或香兰醛缩合,再与3-甲基-1-苯基-2-吡唑啉-5-酮进行Knoevenagel反应及催化氢化得到目标化合物(Ⅰ和Ⅱ),共合成了16个未见文献报道的新化合物,并利用元素分析、IR、MS和1HNMR确证了化合物的结构.初步药理试验结果表明,所合成的化合物有抑制血糖升高的倾向以及能明显加强和延长外源性胰岛素的降血糖作用,其中化合物Ⅰb,Ⅰd和Ⅰf尤为突出,说明这类化合物可能有增强胰岛素敏感性的作用.     

Formation of Ultrafine Apatite Fibers by Sol-gel/Electrospinning

Ultrafine apatite fibers were prepared by electrospinning of sol-gel precursor/poly（ vinyl pyrrolidone） （PVP） solutions followed by subsequent calcination. The as-electrospun and calcinated fibers were observed under a scanning electron microscope and an optical polarizing microscope. Results show that the morphology and the diameter of as-electrospun fibers strongly depend on the viscosity and the surface tension of sol-gel precursor/PVP solutions. After calcination, the smooth as-electrospun fibers shrink and the fiber diameter decreases because of the removal of the polymer. The chemical evolution upon the transformation of the precursor from a gel to the final apatite fibers was investigated by thermogravimetric-differenfial thermal analysis, X-ray diffraction, and Fourier transform infrared spectroscopy. It is thus suggested that the crystalline structure of the calcined fibers is largely influenced by the calcination temperature. After being calcined at 600 ℃, the apatite fibers with a diameter of about 280 nm containing β-tricalcium phosphate were obtained.     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.