Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

Synthesis of perfluoroheptanal by ozonolysis of perfluoro-1-octene

Perfluoro-1-octene was used as a model for developing a method for the preparative ozonolysis of perfluoro-1-alkenes to the corresponding perfluoro-nor-alkenals. Perfluoroheptanal was synthesized.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1146–1147, June, 1994.     

A Diepoxide Belonging to the Rare C1 Point Group

2,6- and 2,7-Dimethylanthracenes were reduced seriatim with lithium in liquid ammonia and lithium in methylamine to their 1,4,5,8,9,10-hexahydro derivatives. Two-fold epoxidation of these tetraenes provided the cis and trans diepoxides resulting from electrophilic attack at the inner double bonds. Trans diepoxide 1 has the very unusual characteristic of lacking a σ plane of symmetry but possessing an inversion center. As a consequence, the ¹H NMR spectrum of C₁-symmetric 1 is simplified relative to those of its isomers 5, 9, and 10.     

辽河冷家油田特稠油降粘剂LJVR-1及其性能评价

采用荧光法测定了辽河冷家油田冷47-556井特稠油乳化HLB值,然后以混合型表面活性剂、非离子型表面活性剂为主剂,快速渗透剂为辅剂按一定比例制备了水基降粘剂LJVR-1.实验结果表明,该降粘剂具有良好的乳化降粘性能,开采后易于破乳脱水,是一种较为理想的特稠油降粘剂.     

A new method for the reduction of nitronyl nitroxides

Reduction of nitronyl nitroxides using hexamethylenetetramine is a very convenient method for preparing the corresponding imino nitroxides and 2-imidazoline N-oxides.     

置换环上的稳定矩阵

本文证明了置换环上的正则稳定矩阵是幂等矩阵和可逆矩阵的积,进一步证明了置换环上的正则稳定矩阵可以对角化。     

Schedule-an expert-like system for machine scheduling

The construction of an expert-like system for machine scheduling called SCHEDULE is presented. Essential parts of SCHEDULE were developed by students in a laboratory course Operations Research on Microcomputers at the University of Karlsruhe, Germany. SCHEDULE consists of the components data base, knowledge base, inference engine, explanation facility, dialog component, and knowledge acquisition component. The knowledge base contains an algorithm base for solving different types of scheduling problems. To establish the rules of the knowledge base the well-known three-field classification of deterministic machine scheduling problems and the concept of the reduction digraph are exploited. Experiences gained during building and demonstrating SCHEDULE are reported.     

苯部分加氢制环己烯的非晶态Ru-M-B/ZrO2催化剂的表征

采用化学还原法，制备了高活性，高选择性非晶态RU-M-B/ZRO2催化剂，并将其用于催化苯部分加氢制环己烯，在140℃、5.0Mpa氢压下，苯转化40%时，环己烯选择性达到85%左右。环己烯最高收率达到52.1%，用XRD、SEM、BET比表面积测定等手段对摧化剂进行表征，XRD和SEM测试表明，RU-U-B/ZRO2属于非晶态，活性组分高度分散，XRD结果证实，在加氢过程中，非晶分解，RU晶化；温度愈高，RU晶化愈快，催化剂的活性、选择性与RU微晶的粒径有关，RU微晶粒径应控制在5nm左右，BET比表面积测定表明，ZRO2的负载提高了催化剂的比表面积，从而有利于活性组分的高度分散，并可阻止RU微晶的长大，讨论了B和ZRO2对提高选择性的作用。     

溶剂热还原合成Cr2O3纳米管(英)

Cr₂O₃ nanotubes with diameters of 80 nm and lengths of 550 nm were synthesized in a solvothermal reduction system at 180 ℃. The acetyl acetone (AcAc) and ethylene glycol (EG) were used as the chelate agent and the reductant respectively in the system. An intermediate compound-Cr(Ⅲ)(C₅H₇O₂)₃ was formed to force Cr₂O₃to crystallize along one direction.     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．