半导体量子点及其应用(Ⅰ)

量子点，又称“人造原子”，它是纳米科学与技术研究的重要组成部分，由于载流子在半导体量子点中受到三维限制而具有的优异性能，构成了量子器件和电路的基础，在未来的纳米电子学、光电子学，光子、量子计算和生命科学等方面有着重要的应用前景，受到人们广泛重视，文章分为Ⅰ、Ⅱ两个部分：第Ⅰ部分介绍了半导体量子点结构的制备和性质；第Ⅱ部分介绍了量子点器件的可能应用。     

纳米累托石-TiO2光催化剂的制备及表征

以TiCl4和累托石为主要原料，制备出纳米累托石-TiO2粉末，并用X-衍射、透射电镜等对其进行表征．结果表明：纳米累托石-TiO2粉末平均直径为17．5nm当焙烧温度从500℃升至800℃时，累托石-TiO2粉末的比表面积从65．7m^2／g下降至3．3m^2／g，单位质量吸附剂的孔体积从0．1430cm。／u降到0．0213cm^3／g；当焙烧温度从300℃上升至500℃时，孔径变化不大，属中孔范围；当焙烧温度升至800℃时，一些孔道出现坍塌，不利于纳米累托石-TiO2粉末的光催化活性．     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.     

稀土氟化物Y0.97Er0.03F3纳米材料的制备及上转换发光

通过燃烧法和控温热反应法制备了稀土氟化物纳米材料，利用XRD和TEM对样品进行了分析和表征。测量了发射波长为980nm激光二极管激发下所得纳米材料的上转换发光性质。     

DTA and X-ray diffraction investigations of laser-irradiated CeO2 powders

The TG and DTA curves and diffractograms of powdered CeO₂ samples irradiated with a CO₂ laser beam with powers of 0.41–1.39 kW/cm² are presented. The laser treatment induced structural changes and probably generation of a metastable phase. X-ray diffraction coupled with thermal analysis was used to establish the structural modifications in the irradiated samples after heating.     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

Compositions for health products obtained by treatment of tomato with beta-cyclodextrin

The aim of this work was to produce lycopene-containing powders from tomato products by a solvent-free method making use of β-cyclodextrin (βCD). Powders were prepared by spray-drying a tomato concentrate (TC), one of the most bioavailable form of lycopene, after mechanical treatment with βCD in different weight ratios. The obtained product was centrifuged to eliminate partly food matrix and characterized for the amount of lycopene hydrodispersed/hydrosolubilized in the aqueous fraction. The chemical antioxidant activity of sera was evaluated too. Powders obtained by spray-drying sera exhibited good flow properties, a lycopene content between 0.4 and 1.09 mg/g and excellent water dispersability. The process developed, which makes use of βCD for the treatment of tomato products, turns to be of great interest to obtain a bulk material for nutraceuticals displaying superior biovailability of lycopene.     

Imaging of wood tissue by ToF-SIMS: Critical evaluation and development of sample preparation techniques

Tissue of Norway spruce wood was investigated by time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and field-emission scanning electron microscopy (FE-SEM). Different sample preparation techniques (including sectioning and drying) traditionally used for SEM analysis were compared and critically evaluated. A high contamination of wood surfaces by polytetrafluoroethylene (PTFE) introduced onto the sample during sectioning was detected by ToF-SIMS. A new protocol was developed and images of wood sections dried in different ways were compared. Main location of Mg, Na, K and Ca, but no lignin in membranes of bordered pits in spruce section surfaces was detected by ToF-SIMS imaging if critical point drying (CPD) or acetone extraction followed by drying under nitrogen flow (AEND) was applied. No specific locations of wood components as well as low signals from metal ions (Mg and Na) were observed on the wood surfaces of freeze-dried (FD) or air-dried (AD) sections. It was found that extractive substances, presenting on surfaces of FD and AD wood section, were evenly distributed on the surfaces and interfered with ToF-SIMS analysis. Our results indicated that ToF-SIMS imaging was critically sensitive to the sample preparation technique and a strict protocol for characterization of metals, lignin and polysaccharides in wood was suggested.     

Er3+和Yb3+共掺氟氧化物微晶玻璃的研究

制备了Er3 、Yb3 共掺的SiO2-A12O3-PbF2-CdF2系统玻璃,并进行相应的微晶化热处理,研究了氟氧化物微晶玻璃中Er3 离子的上转换发光特性.研究结果表明:原始玻璃经热处理后得到的β-PbF2相氟氧化物微晶玻璃,Er3 和Yb3 所在局域基质声子能量的降低,使微晶玻璃中Er3 上转换发光强度显著提高,而微晶化后Er3 、Yb3 离子局域环境发生变化,导致微晶玻璃中Er3 离子的绿光上转换荧光强度较强,而红光上转换荧光强度相对较弱.