Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Syntheses and crystal structures of [Mg(HF)2](SbF6)2 and [Ca(HF)2](SbF6)2: new examples of HF acting as a ligand to metal centres

[Mg(HF)₂](SbF₆)₂ and [Ca(HF)₂](SbF₆)₂ monocrystals were grown from the corresponding hexafluoroantimonates(V) dissolved in anhydrous hydrogen fluoride. [Mg(HF)₂](SbF₆)₂ crystallizes in the space group Pnma (no. 62) with a=1249.1(4) pm, b=1230.2(4) pm, c=699.1(2) pm, V=1.0742(6) nm³, Z=4. Magnesium is octahedrally coordinated by six fluorine atoms from which two belong to two HF molecules. The structure can be represented by alternating rows of magnesium and antimony atoms running parallel to the c-axis. Magnesium atoms are connected by cis bridging Sb(2)F₆ units along the a-axis and by trans bridging Sb(1)F₆ units along the b-axis. In this way a three-dimensional network is formed.[Ca(HF)₂](SbF₆)₂ crystallizes in the space group P2₁/n (no. 14) with a=935.2(3) pm, b=1088.7(3) pm, c=1104.8(3) pm, β=106.697(5)°, V=1.0774(5) nm³, Z=4. The coordination sphere around the calcium atom consists of eight fluorine atoms which define the vertices of an Archimedean antiprism. The two HF molecules directly coordinate the calcium atom and their fluorine atoms are placed in the corners of different square faces of the Archimedean antiprism. The Ca-F(HF) distances are shorter than the Ca-F(Sb) distances. The Sb(1)F₆ and Sb(2)F₆ groups have four equatorial bridging fluorine atoms, while the Sb(3)F₆ groups have only two bridging trans F ligands. The Ca atoms in the [−1,0,1] plane are connected by equatorial F ligands of Sb(1)F₆ and Sb(2)F₆ units, forming a [Ca(SbF₆)⁺]_n layer. These layers are connected by trans bridging Sb(3)F₆ groups. HF molecules occupy the space between these layers and additionally contribute to the connection between the layers by hydrogen bonding.     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

Two color up-conversion emissions of Er<Superscript>3+</Superscript>-doped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders prepared by non-aqueous sol-gel method

Er³⁺-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method using the aluminum isopropoxide as precursor, acetylacetone as a chelating agent, nitric acid as a catalyzer, and hydrated erbium nitrate as a dopant under isopropanol environment. The different phase structure, including three crystalline types of (Al, Er)₂O₃ phases, α, γ, θ, and an Er–Al–O stoichiometric compound phase, Al₁₀Er₆O₂₄, was observed for the 0.01–0.5 mol% Er³⁺-doped Al₂O₃ nanopowders at the sintering temperature of 1,000 °C. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the ²H_11/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978 nm semiconductor laser diodes excitation. With increasing Er³⁺ doping concentration from 0.01 to 0.1 mol%, the intensity of the green and red emissions increased with a decrease of the intensity ratio of the green to red emission. When the Er³⁺ doping concentration rose to 5 mol%, the intensity of the green and red emissions decreased with an increase of their intensity ratio. The maximum intensity of both the green and red emissions with the minimum of intensity ratio was obtained, respectively, for the 0.1 mol% Er³⁺-doped Al₂O₃ nanopowders composed of a single α-(Al,Er)₂O₃ phase. The intensity ratio of the green emission at 523 and 545 nm increased monotonously for all Er³⁺ doping concentrations. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er³⁺-doped Al₂O₃ nanopowders.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

原位红外光谱法研究La/TiO2对有机污染物的光催化降解

本工作采用改进的溶胶-凝胶法和浸渍法制备了TiO₂掺杂稀土离子La³⁺的La/TiO₂光催化剂，运用XRD、N₂吸附脱附、紫外可见漫反射光谱(DRS)、表面光电压谱(SPS)等手段进行表征，同时利用原位红外技术考察了La/TiO₂样品光催化降解乙烯、丙酮、苯的气-固相光催化氧化反应，对其光催化降解有机污染物的过程进行了研究。结果表明，TiO₂经适量La³⁺掺杂后，锐钛矿晶型的含量增加，晶粒度减小，比表面积增大，禁带宽度增加，表面光电压信号增强，光生电子-空穴对有效分离；La/TiO₂样品对乙烯、丙酮、苯的光催化性能与纯TiO₂相比均有不同程度的改善，乙烯可以被光催化氧化完全矿化生成CO₂，而丙酮被光催化氧化可能生成中间产物丙酸，苯被光催化氧化可能生成中间产物苯酚和苯醌。     

水热处理氢氧化镁微晶性质研究

Shape apprearance and crystallite characterization of magnesium hydroxide at different hydrothermal tempera-tures have been investigated by SEM， XRD and DSC methods. The grain size， cell parameter and lattice distortion rate of powders under each condition were obtained. The results show that the grains had grown up， especially along the (001) surface as the hydrothermal temperature was raised， accompanying the shrinkage of lattice and the de-scending of distortion rate. These could be relate to the re-crystallization of Mg(OH)₂， as well as the thermal dif-fusion of OH^- with lower charges， resulting in good dispersion， high thermal decomposition temperature and en-thalpy of Mg(OH)₂. Moreover， it is helpful for the increase of the retardant behavior of Mg(OH)₂.     

Nb 掺杂LiFePO4/C 的一步固相合成及电化学性能

用固相法一步合成了Nb掺杂的LiFePO4/C复合材料, 研究了Nb掺杂量对材料电化学性能的影响. 结果表明, Nb掺杂后LiFePO4/C复合材料的电化学性能明显提高. 在0.5C、1C和2C充放电倍率下, 名义成分为Li0.96Nb0.008FePO4/C正极材料的比容量分别为161、148和132 mAh•g−1, 已达到实用化水平. 阻抗谱和循环伏安特性测试显示, Nb掺杂有效地降低了复合材料电极的阻抗和极化, 说明Nb掺杂的主要作用是提高了LiFePO4的电子电导率.     

聚苯乙烯磺酸掺杂聚苯胺的合成

以苯胺（An）为单体，过硫酸铵（APS）为氧化剂，在聚苯乙烯磺酸（PSSA）的水溶液中，合成了可完全溶于水的PSSA掺杂PAn。研究了An浓度，PSSA浓度，APS浓度，APS的滴加时间，反应时间及温度对An聚合反应及其产物的水溶性，导电性及特性粘度[η]的影响。结果表明：在比较宽的实验条件下，都可以合成出具有良好导电性的可溶于水的PSSA掺杂PAn；其中当An：PSSA:APS的摩尔比为1．7：2．5：1，APS溶液的滴加时间为3h，反应时间为1h，反应温度为14℃时，得到的掺杂PAn导电率最高达0．156S／cm。     

健康老年人血清锌,铜,镁含量的调查

应用原子吸收分光光度法对济南市健康老年人血清中铜、锌、镁含量进行了测定。结果表明，健康老年人血液铜、锌水平低，但铜、锌比值正常，而镁的含量则较高。提示这组健康老年人未患心、脑血管疾病及糖尿病的原因可能与铜、锌、镁等微量元素有关。