锌掺杂碳量子点“关-开”型荧光探针检测果蔬中谷胱甘肽的研究

以柠檬酸、乙二胺和乙酸锌为前体,采用一步水热法制备了一种稳定的、高荧光量子产率的水溶性锌掺杂碳量子点(Zn-CQDs)。通过透射电子显微镜(TEM)、X射线衍射(XRD)、傅立叶红外光谱(FTIR)、紫外-可见吸收光谱(UV-Vis)、荧光光谱对Zn-CQDs的结构和光学性能进行了表征。研究表明,Cu~(2+)对Zn-CQDs的荧光产生猝灭,体系的荧光信号处于"关闭"状态,还原型谷胱甘肽(GSH)的存在,使Zn-CQDs-Cu~(2+)体系的荧光得以恢复,体系的荧光信号处于"打开"状态。由此构建了"关-开"型荧光探针用于谷胱甘肽(GSH)的选择性、高灵敏检测。探究了反应p H值和反应时间对荧光恢复体系的影响,同时考察了果蔬中常见的有机小分子和离子对Zn-CQDs-Cu~(2+)体系荧光强度的影响,在最佳实验条件下,GSH浓度在0. 05～80μmol/L内与Zn-CQDs荧光恢复率呈线性关系,检出限达63 nmol/L。将该探针用于果蔬中GSH的检测,样品的加标回收率为98. 6%～101%,相对标准偏差为1. 8%～3. 1%,结果令人满意。     

Co-SrTiO3上光催化分解水制氢的性能研究

氢能在使用过程中不会给环境带来任何污染,是未来最理想的能源。但目前的氢气生产方法能耗较高,同时伴随着严重的环境污染,显然不适合大规模生产能源用氢气。洁净化生产氢气方法的开发备受世人的关注,吸引了大量的科研人员从事这方面的研究。其中以半导体氧化物为催化剂,光催化分解水制氢被认为是最有前途的方法。经过几十年的努力,取得了很大的进步,先后开发出在紫外光照射下可以将蒸馏水分解为氢气和氧气的光催化剂,如TiO2犤1犦、SrTiO3犤2犦、Na2Ti6O13犤3犦、BaTi4O9犤4犦、K2La2Ti3O10犤5犦、K4Nb6O17犤6犦、ZrO2犤7犦等;可见…     

Sol-Emulsion-Gel Synthesis of Shaped Powders in the System BaO-TiO2

Shaped tetragonal barium titanate (BaTiO₃) particles were prepared by the sol-emulsion-gel method with systematic variation of the concentration of a non-ionic surfactant in the organic phase (oil phase) of water-in-oil (w/o) emulsions above or below the critical micelle concentration (CMC). An acetate-based sol with equivalent oxide ratio BaO : TiO₂ = 1 : 1 was selected for the study. Micelle formation of the surfactant and their self-aggregation apparently played an important role in controlling the shape and size of the droplets and accordingly shape and size of the final barium titanate particles resulting therefrom. Transmission electron microscopy (TEM) revealed that with low concentration of the surfactant (2–5 vol%) ill-formed spheres were obtained. Spherical particles were formed with increasing the surfactant concentration to 7 vol%. At 12 vol% of the surfactant, rod-like particles were first found to form, which with further increase in surfactant concentration to 15–20 vol%, gradually transformed to cube-like/lamellar type particles. Attempts have been made to explain the various particle shapes in terms of surfactant aggregation.     

Crystal Structures and Characterizations of Bis(pyrrolidinedithiocarbamato)Cu（Ⅱ） and Zn(Ⅱ） Complexes

The structures of [Cu (S₂CN (CH₂)₄)₂] (1) and [Zn₂(S₂CN‐(CH₂)₄)₄] (2) have been determined by X‐ray crystallography analysis. They are all isomorphous and triclinic, space group of P1^?, with Z = 1. The lattice parameters of compound 1 is: a = 0.63483(2) nm, b = 0.74972(3) nm, c=0.78390(1) mn, α = 75.912(2)°, β = 78.634(2)° and γ = 86.845(2)°; compound 2: a = 0.78707(6) nm, b=0.79823(6) nm, c = 1.23246(9) nm, α = 74.813(2)°, β = 73.048(2)° and γ = 88.036(2)°. The copper atom is located on a crystallographic inversion center and zinc atom lies across centers of symmetry. The Cu(II) ion has a square‐planar geometry while Zn(II) has a distorted tetrahedral geometry. The thermal gravity (TG) data indicate that no structural transitions in the two compounds were abserved and the decomposition products can adsorb gas. Also they all have a high thermal stability.     

Studies of Lead Zirconate Titanate Sol Ageing Part I: Factors Affecting Particle Growth

The formation and growth of polymeric particles during the hydrolysis and condensation of PbZr_0.3Ti_0.7O₃ (PZT 30/70) precursor solutions have been studied as functions of time by using photon correlation spectroscopy (PCS). Particle shape was deduced by measuring the rheological properties of the sols and was found to remain chain-like during sol ageing. Various factors that affect the ageing of PZT sols have been investigated. Ethylene glycol (EG) was found to greatly accelerate the hydrolysis and condensation of the acid-modified Pb-free Zr/Ti solutions but had little effect on the particle growth for the Pb-containing PZT sols. Temperature and H₂O concentration were found to have major effects on the ageing behaviors. The higher the temperature and H₂O concentration, the higher the particle growth rates and the faster the sol gels.     

Effect of the modifier ion on the properties of MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> pigments

Magnesium and zinc ferrites have been prepared by the polymeric precursor method. The organic material decomposition was studied by thermogravimetry (TG) and differential thermal analysis (DTA). The variation of crystalline phases and particle morphology with calcination temperature were investigated using X-ray diffraction (XRD) and scanning electronic microscopy (SEM), respectively. The colors of the ferrites were evaluated using colorimetry. Magnesium ferrite crystallizes above 800°C, presenting a yellow- orange color with a reflectance peak at the 600–650 nm range, while zinc ferrite crystallizes at 600°C, with a reflectance peak between 650–700 nm, corresponding to the red-brick color.     

Conductimetric determination of ion-association constants for calcium,cobalt, zinc,and cadmium sulfates in aqueous solutions at various temperatures between 0°C and 45°C

Thermodynamic ion-association constants for calcium, cobalt, zinc, and cadmium sulfates in aqueous solutions were determined by means of conductivity measurements at various temperatures between 0°C and 45°C. The standard Gibbs energy, enthalpy, and entropy for the reaction M ²⁺ +SO ₄ ^2– M ²⁺ ·SO ₄ ^2– (M=Ca, Co, Zn, and Cd) were calculated from the temperature dependence of the ion-association constants. The values obtained are as follows: G ₂₉₈ ^o =–12.42 kJ-mole ^–1 , H ^o =6.11 kJ-mole ^–1 , and S ₂₉₈ ^o =62.1 J- ^o K ^–1 -mole ^–1 for Ca ²⁺ ·SO ₄ ^2– ; G ₂₉₈ ^o =–12.84 kJ-mole ^–1 , H ^o =5.00 kJ-mole ^–1 , and S ₂₉₈ ^o =59.8 J- ^o K ^–1 -mole^–1 for Co ²⁺ ·SO ₄ ^2– ; G ₂₉₈ ^o =–12.65 kJ-mole ^–1 , H ^o =8.65 kJ-mole ^–1 , and S ₂₉₈ ^o =71.4 J- ^o K ^–1 -mole ^–1 for Zn ²⁺ ·SO ₄ ^2– ; G ₂₉₈ ^o =–13.28 kJ-mole ^–1 , H ^o =8.39 kJ-mole ^–1 , and S ₂₉₈ ^o =72.7 J- ^o K ^–1 -mole ^–1 for Cd ²⁺ ·SO ₄ ^2– .     

The role of anhydrous zinc nitrate in the thermal decomposition of the zinc hydroxy nitrates Zn5(OH)8(NO3)2·2H2O and ZnOHNO3·H2O

The steps associated with the thermal decomposition of Zn₅(OH)₈(NO₃)₂·2H₂O and ZnOHNO₃·H₂O are re-examined. Previous reports have suggested that Zn₅(OH)₈(NO₃)₂·2H₂O decomposes to ZnO via two intermediates, Zn₅(OH)₈(NO₃)₂ and Zn₃(OH)₄(NO₃)₂ whereas ZnOHNO₃·H₂O has been reported to decompose to ZnO via a Zn₃(OH)₄(NO₃)₂ intermediate. In this study, we demonstrate using TG, mass spectral analysis of evolved gases and in situ variable temperature powder X-ray diffraction analysis that, in fact, in the decomposition of Zn₅(OH)₈(NO₃)₂·2H₂O an anhydrous zinc nitrate intermediate is also involved. We, additionally, show that the decomposition of ZnOHNO₃·H₂O to ZnO also involves the formation of an anhydrous zinc nitrate intermediate. The anhydrous zinc nitrate formed in both cases is poorly crystallised and this observation may explain why this phase could not be observed by PXRD analysis in the previous studies.     

Mineralization of 4-Chlorophenol under Visible Light Irradiation in the Presence of Aluminum and Zinc Phthalocyaninesulfonates

Photosensitized oxidation of 4-chlorophenol (4CP) by the title complexes (AIPcS and ZnPcS) in aerated aqueous solution uponvisible light irradiation(λ=450nm) has been investigated using methanol as a disassociating reagent.It is confirmed that the monomeric species of the sesitizer is more active than the corresponding dimer in singlet oxygen generation for 4CP oxidation.However,the monomer is also the main component found in the sensitlzer‘s photobleaching, In this reload, AIPcS is much more stable than ZnPcS, and the Dhotoble~hlno is observed to proceed via singlet and triplet oxygen, respectlvely.The final products of 4CP oxidation in alkaline solution are carbon dioxide and chloride ions.while at pH=7 and pH=3 the p-benzoquinone is the product.The temperature is found to have influence on both the photosensitized degradation of methyl orange and ZnPcS photobleaching,with an activation energy of 15.8 and 24.2kJ/mol,respectively.