A Prospect for Environmental Remediation of Perchlorate via Cost-Effective Pinus Leaves and Dandelion Flower Powder-based Layer Double Hydride (LDH) Sorbents

In this study, pine leaves powder (PiP) and dandelion flower powder (DFP) were repurposed to synthesize layered double hydroxides (LDHs) to form a base for sorbents used in perchlorate remediation from wastewater. The effects of the adsorbent dose, pH, thermodynamics, and coexisting ions were evaluated in batch experiments. The results revealed that 0.1 g adsorbent (PiP-LDH and DFP-LDH) removed 97% and 93% of perchlorate contaminants, respectively. In this study, the correlation coefficient of pseudo-second-order was higher than pseudo-first-order for all the LDHs. The kinetic and isotherm studies showed the best uptake of perchlorate in the short time was by PiP-LDH, followed by DFP-LDH (20 min and 40 min, respectively). The calculated and experimental values of adsorption at the equilibrium state also concurred with the pseudo-second-order model. The prepared LDHs were mesoporous. The surface area of PiP-LDH provided more adsorption sites, rendering it more suitable for perchlorate adsorption compared with the other two LDHs. The model suggests Physico-chemical interactions behind the sorption of perchlorate by LDHs. The adsorption was more influenced by anions i.e, PO₄³⁻ > SO₄²⁻ > NO₃ than monovalent anions due to the increase in the charge radius values. The prepared LDHs could be of great benefit to the environmental remediation of wastewater bodies.     

Dye removal,antibacterial properties,and morphological behavior of hydroxyapatite doped with Pd ions

Hydroxyapatite (HAP) containing different contents of palladium (Pd) ions were synthesized using the co-precipitation method. The structural and morphological properties of the as-synthesized compositions were investigated using XRD and FESEM. The c/a increased from 0.728 to 0.733 with the lowest and highest contributions of Pd(II), respectively. Furthermore, the morphological features were investigated using FESEM. It was illustrated that Pd-HAP was formed as agglomerated as rod shapes with dimensions in the range of 63.4–110.3 nm for no Pd additions, and the size was reduced reaching 43.4–70.5 nm for the highest Pd contribution. Besides, the maximum height of the roughness (R_t) grew from 183.6 up to 236.5 nm for the lowest and highest Pd(II). Besides, the obtained specific surface area was around 28.3, 42.0, and 63.4 m²/g for 0.0Pd-HAP, 0.6Pd-HAP, and 1.0Pd-HAP, respectively. The antibacterial activity was examined against both Escherichia coli (E-coli) and Staphylococcus aureus (S. aureus), and it obvious that the activity was enhanced upon Pd content. The inhibition zone was increased from no sensitivity reaching 4.3 ± 0.9 and 4.5 ± 0.8 mm for no Pd and the highest one, respectively. The removal efficiency of dyes was examined for methylene blue (MB) and it was shown that after 120 min of irradiation, the removal efficiency reached around 86.4% for the highest contribution of Pd. The pseudo-first-order constant (K_app) increased from 0.0032 to 0.0179 min⁻¹. The recyclability of Pd-HAP denoted that removal efficiency decreased to 5.65, 8.14, 6.24, 8.76, and 10.2% for different contents of Pd(II) after 6 cycles.     

Fermented Baker's Yeast: An Efficient Catalyst for the Synthesis of Pyran Derivatives in Water at Room Temperature

An environmentally friendly, one-pot synthesis of biologically important pyran derivatives in water is described herein. The advantages of this method are its simplicity, cost-effectiveness, and environmental friendliness. Water was exploited both as reaction media as well as activator of catalyst (fermentation of bakers' yeast). Compared with other methods for synthesis of pyran derivatives, satisfactory results were obtained with good yields under simple experimental procedure.     

盐碱法提取酵母核酸的工艺研究

对盐碱法提取酵母核酸进行了研究。结果表明,最佳提取条件为提取温度85℃,提取pH为7.5,NaCl的含量为6.5%,提取时间180 min,对酵母核酸的平均提取率达到5.70%。     

Changing the adsorption capacity of coal-based honeycomb monoliths for pollutant removal from liquid streams by controlling their porosity

Coal-based honeycomb monoliths extruded using methods developed for ceramic materials have been used to retain methylene blue and p-nitrophenol from aqueous solutions. The influence of the filters’ thermal treatment on their textural properties and performance as adsorbents was examined. Characterization by N₂ physisorption, mercury porosimetry and scanning electron microscopy along with adsorption tests under dynamic conditions suggest that, depending on the pollutant and its initial concentration, it can be more convenient to previously submit the monoliths to a simple carbonization or to an additional activation, with or without preoxidation, as a consequence of their different resulting pore structures. Infrared spectroscopy indicates that their different adsorption behaviour seems not to be related to differences in their surface chemical groups. In addition, axial crushing tests show that the monoliths have an acceptable mechanical resistance for the application investigated.     

Influence of Selective Edge Removal and Refractory Period in a Self-Organized Critical Neuron Model

A simple model for a set of integrate-and-fire neurons based on the weighted network is introduced. By considering the neurobiological phenomenon in brain development and the difference of the synaptic strength, we construct weighted networks develop with link additions and followed by selective edge removal. The network exhibits the small-world and scale-free properties with high network efficiency. The model displays an avalanche activity on a power-law distribution. We investigate the effect of selective edge removal and the neuron refractory period on the self-organized criticality of the system.     

啤酒酵母中β-(1-3)葡聚糖的提取及其性能分析

本文采用Sevage脱蛋白法、酸溶液浸提法、碱溶液浸提法对啤酒废酵母细胞壁中的β-(1-3)葡聚糖作了提取试验,并对所获多糖进行生化特性分析,阐述了碱溶液浸提法是从啤酒酵母中回收高质量β-(1-3)葡聚糖的理想途径．     

RNA interference silencing the transcriptional message

We developed the microbial immobilization particle with curdlan and activated carbon, which has great adsorption capacity. The characteristics of porosity and mechanical strength of these supporting particles are dependent on manufacturing method. The supporting particle showed the best performance when the ratio of curdlan and activated carbon was 30 to 6 g/L. Brumauer-Emmett-Teller (specific surface area) and swelling capacity of the carrier were 52.63 m²/g and 17 (w/w), respectively. The immobilization characteristics of iron-oxidizing bacteria on supporting particles were observed using a scanning electron microscope. The concentration of micro-organism on the surface of supporting particle was increased with reaction time. As the number of iron oxidation batch cycles increased, the iron oxidation rate increased.     

Pulsed Corona Discharges for Tar Removal from Biomass Derived Fuel Gas

To supply combustion engines or gasturbines with fuel gas obtained from biomass gasification, it is necessary to clean the fuel gas. Also the production of chemicals by processes such as Fisher-Tropsch requires a high gas quality. Especially heavy aromatic hydrocarbons (tars) must be removed. In this work, we give an overview of our investigations on tar removal by pulsed corona discharges as an alternative approach to catalytic or thermal tar cracking. Experimental results (at a gas temperature of 200°C) are reported for the removal of various model tar components in synthetic fuel gas. In order to identify the major reaction pathways, experiments were also done on tars in individual fuel gas components. The results show that tar removal by pulsed corona processing is possible. The process for tar removal is mainly via oxidation. Also termination reactions by CO play an important role.