Acid properties of semicrystalline zeolitic mesoporous UL-ZSM-5 materials

UL-ZSM-5 materials have been prepared by templated solid-state crystallization of zeolites starting from the amorphous mesostructured aluminosilicate Al-Meso. Microcalorimetry and FTIR have been employed to characterize their surface acidity. In good agreement with ²⁷Al MAS NMR data, UL-ZSM-5 displayed an improved density and strength of Brönsted acid sites, as compared to Al-Meso, owing to the incorporation of aluminium in a tetrahedral environment similar to that of zeolite ZSM-5. Moreover, they showed an enhanced Brönsted/Lewis relative acid ratio. However, Al-Meso showed the highest concentration of strong Lewis acid sites due to its largest amount of aluminium in extraframework positions.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Fischer-Tropsch synthesis over cobalt catalysts supported on modified SiO2 with mesoporous silica

SiO₂ was modified by hexagonal mesoporous silica to form a mixture with meso-/macroporous sizes and used as support of Co catalysts for Fischer-Tropsch synthesis in a slurry phase. A synergistic effect on the activity of Co catalyst was found. The catalytic properties are related to the state of surface Co and the character of support.     

Glass capillary gas chromatography of amino acid enantiomers

Glass capillaries coated with Chirasil-Val, a chirally functionalised polysiloxane, are capable in principle of resolving all protein amino-acid enantiomers in a single run and within a short analysis time, thus allowing for example the quantitative amino acid determination by enantiomer labelling. The elution characteristics of the individual amino acids however are also dependent upon the chemical nature of the capillary wall surface, and a surface pretreatment is found to be necessary if all protein amino acids are to be analysed. Of the various methods of pretreatment tested, etching of borosilicate glass with gaseous HCl followed by deposition of colloidal silicic acid is considered to be the most suitable.     

Low-Field NMR Relaxation Analysis of High-Pressure Ethane Adsorption in Mesoporous Silicas

Understanding the behaviour of short-chain hydrocarbons confined to porous solids informs the targeted extraction of natural resources from geological features, and underpins rational developments in separation, storage and catalytic conversion processes. Herein, we report the application of low-field (12.7 MHz) ¹H nuclear magnetic resonance (NMR) relaxation measurements to characterise ethane dynamics within mesoporous silica materials exhibiting mean pore diameters between 6 and 50 nm. Our measurements provide NMR-based adsorption isotherms within the range 25–50 bar and at ambient temperature, incorporating the ethane condensation point (40.7 bar at our experimental temperature of 23.6 °C). The quantitative nature of the acquired data is validated via a direct comparison of NMR-derived excess adsorption capacities with ex situ gravimetric ethane adsorption measurements, which are demonstrated to agree to within 0.2 mmol g⁻¹ of the observed ethane capacity. NMR relaxation time distributions are further demonstrated as a means to decouple interparticle and mesopore dominated adsorption phenomena, with unexpectedly rapid relaxation rates associated with interparticle ethane gas confirmed via a direct comparison with NMR self-diffusion analysis.     

Influence of mechanical properties of pectin films on charge density and charge density distribution in pectin macromolecule

The hydration and mechanical properties of citrus pectin films were examined in conditions relevant to those in the plant cell wall. The pectins used for this study varied in the degree of esterification (DE) (high or low) and charge distribution on the backbone (random or block). The hydration of the films was controlled in an osmotic pressure experiment using polyethylene glycol solutions (PEG 20000). Hysteresis tests at constant deformation rate (stress vs deformation) were used for investigating the mechanical behaviour of films. Mechanical and hydration properties of pectin films were examined as a function of charge density, charge density distribution and counterion environment—K⁺, Ca²⁺, Mg²⁺. Swelling decreased with increasing counterion concentration. The effect is stronger in the case of Ca²⁺ and Mg²⁺ for low esterified pectins and therefore crosslinks from divalent ions could be assumed. The crosslink effect is confirmed in mechanical experiments where an increase in the film tensile modulus is observed with increasing counterion concentration. It is shown for the first time that in case of highly concentrated pectin solutions Mg²⁺ cations also act as a crosslinker for pectin macromolecules.     

自组装合成纳米复合TiO2-ZnO介孔材料及其光催化性能

以TiCl₄, ZnSO₄•7H₂O为原料, 尿素为沉淀剂, 利用可溶性淀粉大分子链的空间位阻效应和高分子网络的阻隔作用, 以纳米级碳黑为模板, 采用微波加热、均相沉淀法合成出了一系列纳米TiO₂-ZnO复合介孔材料. XRD分析证明反应前驱体为非晶态, 500 ℃以上转变为锐钛矿结构的TiO₂和ZnTiO₃, 当Ti∶Zn＝1(摩尔比)时, 产物全部为ZnTiO₃ (TiO₂•ZnO). TEM形貌观察结合N₂吸附表明, 基本粒子为球形, 粒径15～20 nm. 最可几孔径8～10 nm. EDS分析证明产品中Ti∶Zn的分析测定值与实际的投料值基本一致, 并且掺杂均匀性好. 光吸收及光催化实验发现Zn含量为50%时, 光催化效果最好, 在日光照射90 min后, 此TiO₂-ZnO复合材料对藏蓝染料溶液降解率可达到100%, 其光催化反应符合一级动力学方程.     

稀土离子(Gd3+,Eu3+)加载于纳米介孔ZrO2中的发光

水热合成法制备的高度有序多孔ZrO2具有规则六角排列，均匀纳米孔洞（约1．8nm)，丰富的表面，界面态及比表面积和强的蓝－（近）紫外光发射，使其较常规体材料有更优异的性质，以稀土离子为探针，研究了Gd^3 ,Eu^3 在这些纳米微孔中的发光行为，结果表明，500摄氏度下，介孔ZrO2与稀土离子相作用并有效地将能量传递给稀土离子，增进稀土离子发光，而在ZrO2:Gd-Eu体系中，Gd^3 在ZrO2与Eu3 间起桥梁作用，使基质ZrO2→Eu^3 的能量传递更为有效。     

Comparison of micro- and mesoporous inorganic materials in the uptake and release of the drug model fluorescein and its analogues

The uptake of the three species of the drug model fluorescein (fluorescein sodium salt (FNa), fluorescein free acid (F), and fluorescein diacetate (FDA)) by zeolite NaX and the mesoporous zeotype MCM-41 was investigated as well as their release rates into solutions at pH 7 and pH 4.5. UV/Vis analysis was carried out at a wavelength of 490 nm. Uptakes of the sodium salt of 9 % for zeolite X and 14 % for MCM suggest little penetration of the pores. The use of ethanol as the loading solvent for F resulted in little uptake for both zeolitic materials due to the successful competition of the ethanol for binding sites. Use of acetone (weaker proton acceptor) as loading solvent significantly improved the uptake of F to 17 % and 12 % for zeolite X and MCM, respectively, whilst the uptake of FDA in acetone increased still further to 22 % and 17 % for zeolite X and MCM, respectively. Generally there was a large initial release of the fluorescein analogues from the surface of the zeolites with very little further increase over time. The prescence of an esterase enzyme in the release medium of FDA tripled the release from MCM to 15 % but left the release from zeolite X unaffected at 6 %. The results obtained show that uptake of fluorescein and its analogues is dependent on the loading solvent used, the amount released is influenced by not only the solvent but the pH and the presence of enzymes in the release medium.