Light-emitting diode-induced fluorescence detection of native proteins in capillary electrophoresis

A continuous-wave 280 nm light-emitting diode (LED) was used as the excitation source for native fluorescence detection of proteins in CE. The operating current and temperature of the LED were optimized in order to achieve high luminescence power. It was found that a forward current of 30 mA and a temperature of approximately 5 degrees C gave the best S/N. By using a set of two ball lenses to focus light from the LED, we achieved a spot of approximately 200 mum with a power of 0.1-0.2 mW on the detection window. Fluorescence was collected with a ball lens at 90 degrees angle through a bandpass filter onto a photomultiplier tube. In CZE an LOD of 20 nM for conalbumin was reached. In capillary gel electrophoresis all eight proteins from a commercial standard kit were detected with high S/N. For a 10 microg/mL total protein mixture, S/N was better than 3 for all proteins in solution. Further improvement in LOD should be possible on utilization of an LED with higher luminescence power.     

Cavitands bearing four fluorophores

The synthesis of novel cavitands containing four fluorophores [tert-butoxycarbonyl protected 2,2′-bis(furyl)benzidine (t-BOC FurylBz) or 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (t-BOC PFDA)] and ionophoric functional groups on the upper rim is reported. The cavitands bearing the four fluorophores emit blue light photoluminescence. In particular, the cavitand containing PFDA moieties exhibits a high photoluminescence quantum yield.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

四元轻稀土硝酸盐水溶液体系{H2O+La(NO3)3+Pr(NO3)3+Nd(NO3)3}的热力学研究

在298.15 K条件下, 利用等压法研究了四元轻稀土硝酸盐水溶液{H2O La(NO3)3 Pr(NO3)3 Nd(NO3)3}及其3个二元亚系{H2O La(NO3)3}, {H2O Pr(NO3)3}和{H2O Nd(NO3)3}的热力学性质. 以NaCl或CaCl2水溶液为参考溶液, 测定了不同水活度条件下该四元溶液的渗透系数及各溶质组元的活度系数. 实验结果表明, 上述四元系与其3个二元亚系之间存在简单共性, 在实验误差允许范围之内(|Δ|≤0.0010), 该四元系符合偏理想溶液模型.     

Hydrodynamic Radius Characterization of a Vinyl-Type Polynorbornene by Size-Exclusion Chromatography with a Static and Dynamic Laser Light Scattering Detector

Both absolute molecular weight and molecular sizes (radius of gyration and hydrodynamic radius) of a vinyl-type polynorbornene eluting from size-exclusion chromatography columns were determined by combined with a static and dynamic laser light scattering detector. The hydrodynamic radius of polymer fraction eluting from size-exclusion chromatography columns was obtained from dynamic laser light scattering measurements at only a single angle of 90° by introducing a correction factor. According to the scaling relationship between molecular sizes and molecular weight and the ratio between radius of gyration and hydrodynamic radius, the vinyl-type polynorbornene took a random coil conformation in 1,2,4-trichlorobenzene at 150 °C.     

Dialing in color with rare earth metals: facile photoluminescent production of true white light

Combining polymeric architectures with metal ions produces hybrid materials with extremely rich properties. We are studying polymers containing terpyridine in the side chain. In this report, the chelation of lanthanide ions, Eu³⁺, Tb³⁺, and Dy³⁺ resulted in metal functionalized copolymers that exhibited excellent emission of red, green, and blue light respectively. The polymer architecture easily allows incorporation of all three colors into the material, which leads to the facile production of true white light in solution or the solid state. Quantum efficiencies for the polymer systems were determined. The white light system had an efficiency of 5%. Various combinations of colors were achieved from the basic RBG colors by simply varying the metal ion ratios in the polymer backbone. This easy tuning of the color makes these systems attractive. Copyright © 2007 John Wiley & Sons, Ltd.     

助熔剂对Y3Al5O12：Ce荧光粉性能的影响

在还原气氛下采用高温固相反应法合成了白光LED用黄色荧光粉Y3Al5O12:Ce(YAG:Ce)研究了助熔剂对YAG：Ce荧光粉发光特性的影响，。XRD的测量结果表明加入合适的助熔剂有利于YAG:Ce荧光粉的晶化，并且不引入杂相，选择BaF2和H3BO3同时使用效果要好于单独使用一种助熔剂，助熔剂的加入可增大YAG：Ce荧光粉的激发和发射光谱强度，并能有效降低荧光粉的中心粒径（D50）控制粉体的粒径分布，适用于白光LED的制造。     

Stimulatory effect of red light on starch accumulation in a marine green alga,chlamydomonas sp. strain MGA161

A marine green alga,Chlamydomonas sp. strain MGA161 was cultivated under illumination of red and white lights. The growth rate under red light illumination was almost the same as that in the basic conditions under white light illumination, but red light-grown cells accumulated almost twice as much starch as white light-grown cells. Although there was a slight decrease in carbonic anhydrase activity, red light-illuminated cells had almost 2.3 times the fructose-l,6-diphos-phatase activity of white light-illuminated cells. Red light might stimulate starch accumulation by increasing the amounts of enzymes related to carbon fixation through the phytochrome system. Cells grown under red light degraded 1.6 times as much starch and produced 1.7 times as much hydrogen and 1.6 times as much ethanol compared with cells grown under white light during 12 h of dark anaerobic fermentation.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.