PBT／PET共混体系的协同效应

ＰＢＴ、ＰＥＴ具有良好相容性，且两种聚合物分子链间存在相互作用，它们的共混体系在熔体降温结晶过程中以及溶液中均表现出协同效应。虽然ＰＢＴ、ＰＥＴ在共混体系中各自形成晶区，但熔体降温结果过程中只能观察到一个结晶放热峰，当ＰＢＴ／ＰＥＴ共混物中两组份分子链段数目相近时，熔体降温结晶峰温较低，峰形变宽，共混体系的结晶程度降低在溶液中两组份分子链段数目相近时，共混物特性粘度（η）值最大，分子链的均方根末端     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

Surface viscoelasticity of phospholipid monolayers at the air/water interface

The surface viscoelastic properties of monolayers of two phospholipids DPPC (L--dipalmitoylphosphatidylcholine) and DMPE (L--dimyristoylphosphatidyl-ethanolamin), at the air-water interface have been investigated. Two techniques were used for the investigation. One involved use of an interfacial shear rheometer (torsion pendulum apparatus ISR1), to provide measurements of the shear viscosity _s as a function of surface pressure, and the second, a modified LB trough with an oscillating barrier to generate periodie dilation and compression so as to measure the dilational elastic modulusE as a function of surface area.Results indicate a strong dependence of _s andE upon monolayer phases. This suggests that the viscoelastic relaxation of monolayers can be understood as molecular rearrangements, domain exchange and molecular reorientations between different monolayer states.     

Effects of substituted ligands on the mobility of complexed anions

From conductance and viscosities measurements on Pr₄NCl, Et₄NBr, and AgNO₃ in acetonitrile and Et₃NBr in nitrobenzene, the Walden products of the anion at infinite dilution were determined in presence of various concentrations of substituted benzoic acids. From these data it was possible to compute the values of the Walden products of the once complexed anions and to estimate the order of magnitude of the Walden products of twice complexed anions. Stokes' law is not obeyed, and the Walden products are not proportional to the third root of the molar volume of the complexed ions, as a consequence of their lack of sphericity. The assumption that the drag force which acts on the ions is proportional to the volume of the substituents results in a linear expression between the reciprocals of the Walden products and the molar volume of the ligands. The experimental results fit this expression within the limits of the experimental errors, and the slopes of the lines are nearly the same for all the anions and for the two solvents studied here, namely, 2.5×10^–4 ohm-cm^–5 mole-cP^–1.     

Synthesis of a model cyclic triblock terpolymer of styrene,isoprene, and methyl methacrylate

The synthesis of a model cyclic triblock terpolymer [cyclic(S‐b‐I‐b‐MMA] of styrene (S), isoprene (I), and methyl methacrylate (MMA) was achieved by the end‐to‐end intramolecular amidation reaction of the corresponding linear α,ω‐amino acid precursor [S‐b‐I‐b‐MMA] under high‐dilution conditions. The linear precursor was synthesized by the sequential anionic polymerization of S, I, and MMA with 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane as an initiator and amine generator and 4‐bromo‐1,1,1‐trimethoxybutane as a terminator and carboxylic acid generator. The separation of the unreacted linear polymer from the cyclic terpolymer was facilitated by the transformation of the unreacted species into high molecular weight polymers by the evaporation of the reaction solvent and the continuation of the reaction under high‐concentration conditions. The intermediate materials and the final cyclic terpolymer, characterized by size exclusion chromatography, vapor pressure osmometry, thin‐layer chromatography, IR and NMR spectroscopy, exhibited high molecular weight and compositional homogeneity. Dilute‐solution viscosity measurements were used as an additional proof of the cyclic structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1476–1483, 2002     

The Degree of Disorder in Hardwood Kraft Pulps Studied by Means of LODP

The amount of disordered material in two types of hardwood kraft pulps was estimated by determining the weight loss at the point where the levelling-off degree of polymerisation (LODP) was reached. The pulps used were commercial pulps viz (1)one conventional birch kraft and (2)one mixed hardwood (MHW) kraft pulp that had been prehydrolysed prior to cooking. The results indicated that the hemicellulose xylan is closely associated with the cellulose in commercial birch pulps. It is therefore only possible to use LODP as a measure of the crystallite length of hardwood cellulose in highly purified pulps, such as prehydrolysed kraft pulp. A model explaining the LODP-results is proposed.     

Enhancedt −3/2 long-time tail for the stress-stress time correlation function

Nonequilibrium molecular dynamics is used to calculate the spectrum of shear viscosity for a Lennard-Jones fluid. The calculated zero-frequency shear viscosity agrees well with experimental argon results for the two state points considered. The low-frequency behavior of shear viscosity is dominated by an ^1/2 cusp. Analysis of the form of this cusp reveals that the stress-stress time correlation function exhibits at ^–3/2 long-time tail. It is shown that for the state points studied, the amplitude of this long-time tail is between 12 and 150 times larger than what has been predicted theoretically. If the low-frequency results are truly asymptotic, they imply that the cross and potential contributions to the Kubo-Green integrand for shear viscosity exhibit at ^–3/2 long-time tail. This result contradicts the established theory of such processes.     

Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate (PTT) via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260°C after 1.5 h, while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260°C, 60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.     

Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity

Solubility parameter and Flory Huggins interaction parameter of a triblock SBES have been obtained from intrinsic viscosity measurements. The solubility of the block copolymer in all solvents (methyl-cyclohexane, cyclohexane, cyclopentane, toluene and benzene) was found good except in the case of n-hexane. The results obtained are similar to other found in literature for SBR and SBS rubbers, and indicate that cyclohexane and cyclopentane and methylcyclohexane are the most compatible solvents for this kind of polymer.     

Polygermoxanes suitable for biochemical purposes: II Linear trigermoxanes (high-viscosity oils)

Linear trigermoxanes, R¹ RGeOGe(R³)₂OGeRR¹, a new series of organogermanium compounds, were synthesized by reaction of a lithium organogermanolate with a suitable organogermanium dihalide. With alkyl or phenyl substituents, these trigermoxanes are structurally unstable viscous oils, due to redistribution reactions. When R³ substituents are bulky groups, such as mesityl, trigermoxanes are thermally and structurally stable oils; depending on the R¹ and R² substituents their viscosities lie in the range 240 to more than 1500 cPo (mPa s) at 20°C. When both terminal germanium atoms are substituted with two mesityl groups, trigermoxanes are stable glassy solids.