Synthesis of Sulfur-Containing Bis-Terpenoids Based on Monoterpene Oxides

Ethanedithiol and di(mercaptoethyl)sulfide react regio- and stereoselectively with (+)-3-carene and -hydroxy(-)--pinene -oxides in the presence of sodium ethoxide to give the corresponding bis- and tris-sulfides with two terpene fragments     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

Acid-catalyzed attack of the dinitrogen ligand in thecis-(Me2PhP)4Mo(N2)2 andtrans-(Ph2PCH2CH2PPh2W(N2)2 complexes by nitronium and nitrosonium cations with the formation of nitrogen oxides

The interaction of labeled dinitrogen complexescis-(Me₂PhP)₄Mo(¹⁵N₂)₂ andtrans-(dppe)₂W(¹⁵N₂)₂ with non-labeled nitronium and nitrosonium fluoroborates,¹⁴NO₂BF₄ and¹⁴NOBF₄, in sulfolane at room temperature in the presence of H₂SO₄ results in rapid formation of labeled nitrous and nitric oxides (¹⁵N¹⁴NO,¹⁵NO), as well as¹⁵N¹⁴N. The yield of the products depends on the reagent ratio and reaches 10–20 mol. % per mole of a complex under optimum conditions. The mechanism of the reactions found is proposed. It involves the step of protonation of the dinitrogen ligand to form the corresponding hydrazido(2–) derivatives, which are then attacked by nitronium or nitrosonium cations. In accordance with the mechanism proposed, it was established that the hydrazido(2–) complexes, (Me₂PhP)₃Mo(¹⁵N₂H₂)Cl₂ and (dppe)₂W(¹⁵N₂H₂)Cl₂, are capable of forming¹⁵N¹⁴NO,¹⁵NO, and¹⁵N¹⁴N under the action of¹⁴NO₂BF₄ and¹⁴NOBF₄ in the absence of an acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 13–13, July, 1995.     

Liquid structure of vanadium tetrachloride from neutron diffraction study

Assuming the separation of the intermolecular scattering function into the radial and angular parts and using Egelstaffet al’s orientational model for tetrachlorides, the structure of liquid vanadium tetrachloride has been studied. It has been observed that such a separation is approximate for this liquid and the introduction of a third correction term is required to account for the molecular structure function. The chlorine-chlorine partial structure and effective angleaveraged intermolecular chlorine-chlorine potential in the liquid has been evaluated. Without taking the third correction term, introduced to generate theoretically the molecular structure function, the centre structure function has been obtained in an approximate way from the experimentally observed molecular structure function and from it the centre radial distribution function, centre direct correlation function and the angle-averaged vanadium-vanadium effective potential has been evaluated.     

Effect of the extent of reduction of V2O5 on the adsorption of propylene and the oxidative dehydrogenation of propane to give propylene on V2O5 and V2O5/TiO2-SiO2

An increase in the propylene output in the oxidative dehydration of propane on V₂O₅/TiO₂-SiO₂ was observed after prior reduction of V₂O₅ in the reaction mixture to V₂O₄, which reduces the destructive chemisorption of propylene. A low titanium dioxide content in TiO₂-SiO₂ hinders the deep reduction of V₂O₅ to V₂O₃, which reduces the conversion of propane. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 373–378, November–December, 2007.     

液膜法分离钒(Ⅳ)的研究

本文用P204-兰113A-煤油组成的滤膜体系处理钒(Ⅳ)的溶液,并考察了表面活性剂、载体、外相pH值、内相酸度、起始钒(Ⅳ)浓度以及乳水比等因素对分离的影响。     

Deposition of complex multielemental thin films

Modern condensed-matter physics is increasingly concerned with the design, synthesis, analysis, and exploitation of chemically complex materials and structures. Complex metal oxides and strongly correlated electron systems such as YBa₂Cu₃O_7−x and La_1−xSr_xMnO₃ are paradigmatic examples. Their production in the form of high-quality thin films is of both technological and fundamental importance and has stimulated a concerted effort in the last two decades to find and optimize efficient techniques to this end. This review discusses the physics behind and the requirements for synthesizing high-quality films of such materials and examines fundamental aspects of the growth processes associated with magnetron sputtering and pulsed laser deposition, the two techniques which presently offer the best solutions in this burgeoning field.